Universal playground for basketball and volleyball. Hockey box. Universal sports ground

Artificial grass used as a replacement for natural lawn for covering football field, tennis court, hockey rink, basketball court, children's playground. And also how decorative coating in landscape design, in the lobbies of hotels and cafes, etc.
The pile, imitating grass stems, is sewn into a multi-layer base fabric, which is secured on the reverse side with a latex copolymer with special additives that enhance its strength. The pile material is polyethylene, polypropylene and polyamide, or a combination thereof. ANDartificial grass, depending on the purpose, non-fill or backfill is used. For backfilling, quartz sand and rubber granules, EPDM are used as a coating component. Not backfilling artificial grass comes in two-layer and three-layer. Thanks to its original structure, it is almost resistant to trampling. Does not require maintenance.
The construction of artificial fields differs from natural ones only at the stage of laying the lawn. Just like for a natural field, a drainage system, heating, and foundation are made.
With proper care, artificial grass can serve for a long time; for this it is necessary to remove leaves and other debris, comb the pile, add sand and loosen sand and rubber granules.

Advantages of artificial grass:

• durability and wear resistance, annual service life 1500 – 4400 hours;
• there is no need to water, mow, fertilize, or sow;
• weather resistance: does not fade in the sun, does not freeze;
• thanks to the existing perforation, it allows moisture to pass through and does not form puddles, remaining comfortable for use;
• Artificial grass courts are soft, comfortable and safe to play;
• artificial grass sports fields can be used all year round;
• dense and high pile, in addition to special gaming characteristics, helps reduce stress on the player’s spine and legs due to greater impact absorption, while reducing the number of injuries and accidents suffered by players.

• used as a replacement for natural grass to cover a football field, mini-football field and tennis court, hockey rink, basketball court, children's playground, multifunctional sports grounds:
• as a decorative coating used in landscape design, in hotel and cafe lobbies, etc.

And volleyball. Each of these types of combat sports has its own set of requirements regarding sports equipment, field sizes, type of coverage and markings. If we consider each of these games separately, it is not difficult to deduce the common denominator for all and, accordingly, the criteria that should apply to a universal sports field.

Basketball

A standard basketball court, according to FIBA ​​requirements, measures 28 by 15 meters. However, the minimum required by the rules of the game for amateur courts is 25 by 15 meters.

On the playing field there are two boards with baskets and markings established by the rules of the game. All contours and lines must be the same color, usually white. The standard line width is 5 centimeters.

Mini football

The minimum dimensions of a mini-football court are 25 by 18 meters.

The standards for drawing lines are the same - 5 cm wide and one color.

Volleyball

The standard dimensions of a volleyball court are 18 by 9 meters. The site is divided into two parts using a meter-wide grid.

Marking is also carried out according to the rules of basketball and futsal.

Thus, we can designate the area of ​​a universal sports ground, that is, one where you can practice all three sports. That is, the standard is 20 by 40 meters.

Should be given Special attention preparing the foundation for a universal sports ground.

The simplest option is a sand base. To begin with, soil is excavated up to 20 cm deep under the sand. Once it is filled, the surface must be leveled, watered and compacted with a vibrating plate or roller. Internal drainage is used, that is, the ground absorbs moisture. This type of base is used for rubber slabs and modular coverings. The costs of such a foundation include the costs of maintaining its normal operational characteristics.

Concrete base is the most common. It is one of the most durable. The thickness of the concrete base should not be less than 10 cm. Minimal reinforcement is often performed with 5 mm wire with a cell size of 150 by 150 mm. The depth of the trough is up to 40 cm. It is filled in layers.

Concrete is laid taking into account the slope for storm water drainage. Bypass drainage is practiced. Self-leveling coatings (waterproof), acrylic, rubber coverings in rolls and artificial grass.

Asphalt bases are also a fairly common method for preparing a sports field. They are also considered quite durable and strong. The depth of the “pit” should be about 30 cm. Sand (15-20 cm), crushed stone (10-15 cm) and on this “cushion” - as experts call it, a seven-centimeter layer of asphalt are sequentially laid on the ground.

Crushed stone base is also used for sports fields. It all depends on the characteristics of the soil. On sand or gravel its thickness is minimal, but on clay soils it can reach almost a meter.

Each layer must be saturated with water. Then they need to be compacted with a vibrating plate or hand roller. To strengthen this type of foundation, experts recommend installing a curb or curb.

Before purchasing a base for a sports ground, you should consult with the specialists who will install it for you. This is reasonable to do, since the type of sports equipment, and their layout, depends on the surface. And the choice of the coating itself is largely influenced by the type of soil on which you are going to place the site, the presence of drains and a host of other circumstances.

The fencing for a future sports ground also depends on many factors. There are ready-made welded sections of various sizes, heights, diameters and wire mesh sizes. They are often called panel fencing. They are installed both on standard types of universal sports grounds, and are manufactured individually, “custom-made”.

If we are talking about ordering a more durable sports fence, then it is optimal to frame the perimeter with welded metal structures made taking into account the typical size of the site.

And finally, how to equip a universal sports ground? As we have already said, the dimensions and layout must correspond to three types of games: basketball, mini-football and volleyball. It is most advisable to immediately take sets of sports equipment for a universal sports ground. Separate basketball posts with backboards included, volleyball nets with cables and fasteners, and football goals with a solid or prefabricated crossbar are widely used. However, you can also order a sports ground “in bulk” - it all depends on the financial capabilities of the buyer.

TH "New Site" will take care of your concerns regarding the preliminary assessment and preparation of the proposed site. The company’s specialists will advise you and offer you a choice of the most suitable sports equipment for this site. Moreover, experienced employees can complete all work on a turnkey basis.

The reputation of TH “Novaya Ploshchadka” and the trust of clients is our most valuable capital. Don't delay decision shelve and order a universal one

Multifunctional site

A multifunctional sports ground can be designed on the basis of a hockey court. The multi-purpose sports ground will be used throughout the year for training. various types outdoor sports. The sports ground based on the hockey rink can also be used for local competitions in hockey, basketball, volleyball, and mini-football. Therefore, the hockey rink must be equipped with sports equipment: basketball stands, hockey goals, mini football goals, volleyball posts

The hockey court can be turned into a multifunctional sports ground. The side of the hockey rink is made of fiberglass, polyethylene and plywood. It is better to use fiberglass boards for sports fields, as this is the best material. The board for a hockey box made of fiberglass is made of different thicknesses from 5 to 10 millimeters. The optimal thickness of the fiberglass panel for a hockey board is 7mm, in terms of price/quality ratio. You can play hockey or practice on a fiberglass hockey rink. figure skating in winter.

And in summer time year, the hockey box can be converted to play mini-football, basketball or volleyball

We offer the option of arranging a hockey court into a sports ground rectangular shape. To do this, you only need to change the radius hockey boards to straight hockey boards, where you can see in the photographs above.

Universal sports ground

This section presents universal children's and youth sports grounds, which Our company produces and installs.
All of them can be manufactured any size according to your instructions. All characteristics of fencing,
equipment and specifications sports equipment can be adjusted
according to your wishes.

Universal children's and youth sports ground

The platform is universal, as its characteristics allow year-round use in each yard for practicing various outdoor sports.
Designed for playing football, basketball, volleyball and other sports games, as well as for gymnastics. Meets all modern requirements,
presented to planar sports facilities for mass classes physical culture. The capacity of one site is up to 60 people per hour.

Compact gymnastics (5x22m) and play area (11x22m) can be changed in size. The base is a playground and covered with one of the types of sports surfaces.
Set of shells gymnastics area allows you to perform exercises for different people age groups for all major muscle groups. Play area is fenced
with built-in mini-football goals, basketball posts with fiberglass backboard For open areas, anti-vandal ring with chain.
The fence is at least 1.5 m high, and at the ends - 3-4 m. Artificial lighting is provided. All elements of the site are painted
in various colors with durable anti-corrosion paint, enlivening the most drab standard neighborhood with its range.

When constructing outdoor sports grounds, we offer the full range of works:
laying sports surfaces, installing fencing, installing lighting, installing sports equipment And tribune.

The base of the site is asphalted or concreted and can be covered with one of the types of sports surfaces, such as: modular from plastic elements,
bulk based on crumb rubber. The size of the playing area is 11x22 m, or any according to your request.
The gymnastics area may also have an asphalt or concrete base.

The following equipment can be installed on it:
monkey bars
bars
wall bars
three-level crossbar
benches
gymnastic balance beams
press bench
tennis table
equipment for workout

Can also be installed any other outdoor equipment. The size of the gymnastic area is 5x22 m, or any according to your request.
Having small dimensions, the playground can easily be placed in the courtyard of a residential building or on school grounds.

To go to the catalog, click on the picture

The base of the platform is covered with a self-leveling coating based on crumb rubber.

To go to the catalog, click on the picture

The base of the site is covered with a bulk coating of “granite screenings”.

Sketches of fencing designs made from chain-link mesh, welded from a profile pipe and from welded mesh with a square cell

The sports ground fencing can be made of two types of sections:
1. With filling from chain-link mesh.
The sections are a frame made of steel profile pipe 40x20 painted with enamel for exterior use PF115 or polymer powder paint
fired in a kiln and filled with galvanized mesh.
2. Welded steel profile pipe.
The sections consist of a frame made of steel profile pipe 40x20 and filling in the form welded grating from steel pipe 20x20. Sections are painted with enamel
for exterior use PF115 or polymer powder paint fired in an oven.
Sections are installed on pillars made of steel profile pipe 40x80 or 80x80 painted with enamel for external use PF115 or polymer
powder paint fired in an oven. The height of the fence can be from 1.5 m to 4.0 m.

Universal sports grounds