Buy a Russian-made PVC boat. How to start an inflatable boat production. Discounts, sales, promotions on PVC motor boats

Russian fishermen appreciated domestic inflatable boat, and they are in constant demand. Several domestic manufacturers compete with each other in the quality, reliability and comfort of boats.

Yaroslavl and Ufa plants

The factories of JSC Yaroslavl-Rezinotekhnika and JSC UZEMIK produce a total of about 70 models of PVC boats.

Of these, the most popular models are:

Ibis 20

Boat with a carrying capacity of 500 kg and dimensions of 3600x1650 mm. The bottom is made of lattice slate. Has two hard seats. The boat is equipped with dismountable duralumin oars and a pump. Three independent air compartments. Recommended motor power is 20 hp. The model range includes eight boats with motors of 3, 5, 8, 6, 10, 15, 20, 25 hp. Price $640.

Boat with an inflatable keel 310 cm long and a carrying capacity of 375 kg. On the bottom there is a rigid sheet of laminated marine plywood. Designed for use with a motor with a maximum power of 10 HP. With. The line includes 4 models for engines with power of 6, 8, 10, 20 hp. With. The boat hull is equipped with a fender. The boat is packed in two cases and equipped with two hard seats, collapsible duralumin oars,. The price of the boat is $525.

ML-2

The smallest PVC motor boat produced by the Ufa plant OJSC "UZEMIK" with a length of 250 cm and a carrying capacity of 300 kg. The permissible maximum engine power is 8 liters. With. The boat itself assembled form weighs 42 kg. The bottom is made of collapsible hard slate. Three independent air compartments. Price $236.

Karaidel-44

A boat with an inflatable keel with a carrying capacity of 400 kg and a length of 360 cm. It has three independent cylinders, except for the keel. The watercraft is designed for an engine with a power of up to 12 hp. With. The boat weighs 75 kg. Price $640.

Manufacturer Mnev and K

The legendary inflatable boat with welded seams and an inflatable keel weighs 46 kg and is 3 meters long. The bottom is made of hard flooring. Designed for use with engines with a maximum power of up to 8 hp. With. Load capacity 370 kg. Made from multilayer PVC with a density of 850 g/m². It has four independent compartments that form a spacious cockpit. Equipped with oars, payolas, pump, two cans, stringers, trunks. Additionally, it can be equipped with an awning tent. The line includes 7 models with lengths from 2.75 m to 4.0 m. Price $565.

A model from a series of heavy boats, of which there are four varieties in the line, ranging from 4.2 m to 5 m in length with a carrying capacity of 820 kg to 1 ton. Recommended, and also the maximum engine power, is 35 hp. With. Has four independent cylinders and an inflatable keel. The boat is designed for long and comfortable trips and even for transporting heavy loads and horse-drawn animals. Five independent air compartments. The bottom is made of hard flooring. Boat weight 100 kg. The boat can be equipped with a console and a tent. Price $1165.

Manufacturer Leader

A small-sized boat made of five-layer PVC with a length of 2.5 m and a carrying capacity of 320 kg. The weight of the boat is only 22 kg, which even a teenager can carry. The boat is designed for use with a motor up to 6 HP. With. The bottom is made of slatted flooring. Includes: dismountable aluminum oars, two plywood cans, pump, repair kit and backpack for carrying. Price $367.

Heavy boat with a carrying capacity of 1100 kg. Has 4 independent compartments and an inflatable keel. Designed to work with a motor with a maximum power of 40 hp. With. The bottom is made of hard flooring. Based on the stated characteristics, it can take on board any small car: Zaporozhets, Oka, Smart. In addition to the standard configuration, it is equipped with two overpressure units. Price $980.

Manufacturer Solar

Solar 330

The most popular boat size is 330 cm and own weight only 39 kg. The boat's cylinders are made of Viniplan 6379 fabric, it has a density of 1100 g/m⁰. The transom is installed not behind the bottom, but on the bottom. The seats are made of moisture-resistant laminated plywood. The deck is very hard. The maximum motor power for this boat is 15 hp. With. Includes: oars, foot pump, seats, repair kit, valve key. Price $750.

Materials used in the manufacture of Russian-made inflatable boats

Just like all over the world, at Russian enterprises that manufacture inflatable boats, the main production material is PVC - polyvinyl chloride and synthetic fabrics.

Fabrics determine the elasticity of the structure, for example, polyester fabric is stiffer than polyamide. The elasticity of polyamide fabric gives it better tensile test performance.

By itself, polyvinyl chloride is a hard substance, but with the addition of polyurethane, the alloy becomes suitable for making strong and flexible inflatable boats.

For the manufacture of inflatable boats, a 5-7-layer sandwich made of fabric and a mixture of PVC and polyurethane is used. This material glues, cooks and vulcanizes well. By the way, a patch with glue holds better than after vulcanization.

How to choose the right Russian-made inflatable boat

Choosing a boat is easy. Decide how many people will usually be on the boat. Calculate the required motor power based on the fact that 20 kg of weight requires one hp. and search on the Internet. Whichever boat you like, buy it. But first re-read all the forums, with witness statements about the boat you have chosen.

One piece of advice. In the passenger capacity column, divide everything by two. The boat, of course, can be loaded with the number of people specified in the specification, for example, when evacuating drowning people, but such a number will not work for fishing. Therefore, 260 cm long cannot be a boat for two fishermen.

Tuning of Russian-made inflatable boats

This means making it heavier, so don’t overdo it.

However, on board it would not hurt to have a speedometer, GPS navigator, barometer, bow electric motor with remote control, windshield wipers, awning, audio system, holders for spinning rods (sacred), anchor rollers, spotlights, etc.

First of all, look at the weight. Determine what is more important to you: tuning or speed and consumption.

You can choose and buy PVC boat, inflatable boat with motor for fishing and hunting, PVC motor boat for sale in ☝☝ ☝ LOAN, INSTALLMENTS ☝☝☝ with delivery in the Globaldrive online store catalog Boats PVC (polyvinyl chloride). For questions regarding purchase and sale PVC boats You can contact by phone hotline☝ 8 (800) 2229039 ☝ (24 hours a day and free from any phone in Russia).

Prices for PVC boats at Globaldrive

At Globaldrive always low price for PVC boats due to significant wholesale supplies to Russia.

Discounts, sales, promotions on PVC motor boats

Our online store constantly holds promotions and sales. PVC boats with motors with discounts are marked with special signs.

Shops for PVC boats for motors and outboard motors Globaldrive

Globaldrive opens stores of PVC boats for motors and outboard motors throughout Russia. You can view store addresses. Further development of the chain of stores is planned.

Tell your friends about ouronline store of PVC boatsto your friends on social networks.

PVC boats for motors: video

More details

PVC boat for motor: price, buy in the Globaldrive catalog

Thinking about buying PVC inflatable boat for motor? The online store of the federal retail and wholesale company Globaldrive will help you make your dream come true, where you can buy budget compact models with an inflatable bottom, PVC boats with a transom and keel, as well as with a rigid hull and an inflatable side. The most popular modifications of water vehicles are always available in stock, and you can get a closer look at the new products in our showroom.
The Globaldrive online store invites you to choose a model from the extensive range of our catalog. We offer high quality motor boats made of polyvinyl chloride (PVC) produced by famous world and domestic brands:

South Korea: Stormline, Barracuda;
Russia: Solar, Admiral, Kolibri, Hunter, REEF, Riviera, Frigate;
China: Gladiator, Nissamaran, Speeda, Tadpole.

Our company is the exclusive distributor of the Stormline brand, which guarantees affordable prices for best PVC boat models.

Buy a PVC (polyvinyl chloride) boat: sale on credit and installments

The online store of PVC boats Globaldrive provides its customers with favorable terms of cooperation. All products presented in the catalog have a warranty, and if necessary, you can order repairs and maintenance from us.

You can pay for the goods using any convenient one of 10 payment methods. If you do not have the full amount of money, then purchasing any type of water vehicle, motors can be purchased in installments or on credit.
Our company cooperates with various banks that will offer you transparent lending conditions without a down payment, certificates, or guarantors. You will be notified within half an hour the decision taken by installments or loan, which can be paid over a period of 3 months to 3 years. Visit our catalog of PVC boats, choose a watercraft, and we will ensure its delivery to any city in Russia!

PVC boat motor: buy from Globaldrive

In our online store you can order for PVC boats made in Japan, China, Korea, USA, Russia. When choosing a boat, you should know the features of its equipment with outboard engines. For PVC boats with dimensions up to 2.7 m, the motor can have low power - about 2-3.5 hp, maximum 5 hp, and weight 11-26 kg. Three-meter models are equipped with ten-horsepower engines, and 4-meter models are equipped with 20 horsepower engines. On vessels larger than 4 m, motors with a power of 30 hp or more are installed. and weighing from 60 kg.

Important rules for choosing a PVC boat correctly

When choosing inflatable PVC boats, you need to pay attention to:

length: for single swimming, a size of 220-240 cm is sufficient, and for a group of fishermen, hunters of 2-3 persons, models from 300 cm are the best option;
presence of transom: suspended or glued transom;
bottom design: inflatable bottom or hard flooring;
shape, modification and other parameters.

When they are selected PVC boats for fishing, then many take into account not only the thickness, but also the color of the material. The diameter of the tanks, the type of nose and other nuances are of no small importance. Contacting our specialists guarantees qualified advice and right choice in each specific case!

Types by bottom type

The most common option is an inflatable bottom, which provides a lighter weight of the product, ease of storage and sufficient load capacity along with optimal performance, which makes it easier to go on planing. By inflating modern (low-pressure inflatable bottom) or models with a high-pressure bottom to a pressure of 1 atmosphere, you can stand on them as confidently as on a hard floor.

Many fishermen, hunters and water recreation enthusiasts choose PVC payol boats with a folding or hard bottom. Hard flooring is made in the form of a collapsible or solid bottom made of wood or aluminum treated with moisture-resistant impregnation and is most often used on keel models. The hard bottom ensures comfort on board, creating maximum stability and safety. The disadvantages of a hard bottom include heavy weight designs, difficulty of transportation using, need for storage space.

Length and passenger capacity

Inflatable, keel and transom boats made of polyvinyl chloride vary in size, but the most popular of them are:

single-seat, having a length of up to 3 m and capable of withstanding a total load of up to 500 kg;
double, made in sizes from 3.3 m to 3.5 m and designed to accommodate 2-3 people and 700 kg of cargo;
three-seater, reaching a length of 4.5 m and suitable for family holidays or group hunting.

Our PVC boat website It also offers more heavy-duty models, which are distinguished by significant dimensions and are designed for boat trips or fishing.

Buy PVC boats wholesale from Globaldrive

You can buy PVC boats wholesale V Globaldrive. You can also become our dealer for the sale of PVC boats. You can find out the terms of cooperation.

PVC boats are becoming more and more popular every day among fishermen in our country. Every fisherman at least once thought about having his own watercraft: a boat or a motorboat. No one needs to explain how significantly a PVC boat expands the angler’s fishing capabilities. Owning your own boat or motorboat is not a cheap pleasure, but there is an alternative option: a PVC inflatable boat.

An inflatable boat, unlike a regular one, has a large number of advantages:

An inflatable boat takes up a significant less space when stored, it can be stored in a garage, utility room, even in an apartment.
An inflatable boat is much more convenient to transport to a fishing spot; there is no need to purchase a car trailer or install a towbar.
To launch an inflatable boat, there is no need to look for a special place; an inflatable boat weighs much less, so even one person can easily launch it.
The price of an inflatable boat is several times cheaper, so a large number of people can afford to buy it.

The first inflatable boats were made of rubber; they were not very reliable in operation, but were inexpensive; anyone could afford to buy such a boat for fishing, hunting or tourism. The basis of a rubber boat is a synthetic mesh or cotton fabric, covered on both sides with rubber for gas-tightness. Over time, factories that manufactured rubber boats improved their manufacturing technology and began to use rubber with a high content of natural rubber, making the boats much better and more reliable.

In the 90s, the first inflatable boats made of a new, more modern material, polyvinyl chloride (PVC), appeared. PVC fabric was a nylon mesh coated on both sides with a layer of polyvinyl chloride (PVC), which is an elastic material that provides airtightness. PVC boats were significantly superior in performance to rubber boats, but at first they were much more expensive than rubber boats. A little later, more and more manufacturers began to appear on the market and prices for PVC boats dropped significantly. Today, PVC inflatable boats have become the most popular type of boat of all.

Advantages of PVC boats

Easy storage of PVC boats. Before storage, a rubber boat must be thoroughly washed, dried thoroughly, sprinkled with talcum powder and stored, if possible, unfolded, in a partially inflated state, so that the boat does not rot or become moldy. There are no such problems with the PVC boat, I rolled it up and put it in storage until spring: in the garage, on the loggia, in the basement. The storage temperature of a PVC boat is from -40 to +50 degrees. It is advisable to store a rubber boat at temperatures from -5 to +35 degrees.
PVC boats are more resistant to tearing and abrasion. PVC fabric is denser and rougher in structure, so it can withstand mechanical stress better. The rubberized fabric of a rubber boat does not resist longitudinal cuts well, so the rubber boat must be protected from sharp branches, snags, sharp stones and glass fragments.
The seams of PVC boats are much stronger and more aesthetically pleasing than the seams of rubber boats. The seams are the most weak point rubber boat, to strengthen them, the seams are covered with special tapes, so they look much less aesthetically pleasing. And despite the reinforcement of the seams with tapes, the strength of the seams of a rubber boat is still worse than that of a PVC boat. The tensile strength of seams for a PVC boat is 3.5-4.5 kg, for the seams of a rubber boat it is 0.5 kg.
PVC boat cylinders hold higher pressure, their working pressure is 0.3, while rubber boats have a working pressure of 0.15. The pressure in the cylinders of a rubber boat must be carefully controlled, otherwise in the heat, the overinflated cylinders can burst; this can especially happen with an old boat that has served its owner for many years. This does not happen with a PVC boat.
PVC boats have less weight than rubber inflatable boats. This moment becomes especially sensitive with a large inflatable boat.
The fabric from which PVC boats are made is much more practical than rubberized fabric. It does not rot, is not exposed to fungi and bacteria, does not absorb moisture, and is not afraid of frost or ultraviolet radiation.
PVC boats are well suited for use with a motor, since PVC fabric is not afraid of contact with petroleum products: gasoline, motor oil.
Manufacturers of PVC fabric produce more than 20 colors and shades of their fabrics, which allows designers and constructors of PVC boats to create beautiful and aesthetically pleasing boats to suit every taste of their customers.
PVC boats are considered safer; even if the boat cylinder is punctured, the air from the PVC boat cylinder comes out much more slowly, leaving the boat owner more time to take measures to save the boat and the property in the boat. Rubber boats sink faster.

Disadvantages of PVC boats

PVC boats, due to the greater rigidity of the material, take up more volume when folded. A rubber boat of the same size will take up less space when folded than a boat made of PVC fabric.
In late autumn, at sub-zero temperatures, when folding a PVC boat, difficulties often arise because the fabric of the boat becomes coarser, becomes stiff and is difficult to fold. Although speaking about this drawback, it should be noted that very few people use a boat at sub-zero temperatures; most owners use an inflatable boat at ambient temperatures above 15 degrees.
Repairing a PVC boat is considered more difficult than repairing a rubber boat. In the early days after the appearance of the first boats made of PVC fabric, it was very difficult for the owners of such boats to find glue and a repair kit to repair their boat. Currently, along with each boat made of PVC material, glue and a set of patches are included in the kit for repairing punctures and cuts in the field. In addition, through the advertisements you can find craftsmen in your city who can qualitatively repair your PVC boat, eliminating any problems with your boat.
A PVC boat, as a rule, costs much more than a rubber boat. Although recently the prices for PVC boats have almost become equal to the prices for rubber boats.
The PVC fabric material can be easily burned by a cigarette or coal from a fire, so when using the boat you need to be careful and attentive, especially if you are a smoker.

Choosing a PVC boat

A person has a lot of questions when choosing an inflatable boat, especially if this is his first boat. When choosing a boat, you need to consider several important points:

The size of the boat should match the size of the body of water where you will be fishing. The larger the size of the body of water, the larger your boat should be.
Be sure to consider the number of people who will be on the boat with you.
For fishing on a small body of water: a pond or a small river, a simple rowing boat designed for one, maximum two people is quite sufficient. For fishing on a large body of water: a large reservoir, a large river, a lake, it is better to purchase a PVC boat with a transom for installing an outboard motor.
Pay attention to the number of cylinders in the boat, there should be at least two, or even better, three. The more cylinders there are in a boat, the safer it is.
Boats differ in the density of the PVC fabric from which they are made. The higher the density of the fabric, the thicker and stronger the fabric will be, but at the same time the weight of the boat increases. It is advisable to choose boats with a fairly high density of PVC fabric.
The bottom of the boat may vary in design. There are boats with an inflatable bottom, as well as boats with a bottom made of plywood or even aluminum.
If for you great importance have the boat's performance and stability on the water, try to test the model of your future boat by borrowing a boat of the same model from your familiar fishermen and trying it on the water.

10 best PVC boats

Aqua

PVC boats under the Aqua brand are produced by the Boat Master enterprise located in the city of Ufa. The Boat Master company was founded in 1993 and is currently one of the largest manufacturers of inflatable boats in Russia. The Boat Master enterprise produces inflatable boats under 5 brands: Riviera, Taimen, Aqua, Apache and RUSH.

Boats under the Aqua brand are perhaps the most popular among the company's products. Under the Aqua brand, 4 series of inflatable boats are produced: Aqua Optima, Avka Master, Aqua Motor and Aqua NDND Motor.

The Aqua Optima series of boats includes PVC boat models with a length of 190 to 260 cm, with a cylinder diameter of 280 or 340 mm. All of them have two inflatable compartments, the PVC fabric density is 750 g/sq.m. All Avka Optima boats are rowing, have a capacity of 1-2 people, and are not designed to install a boat motor.

The Aqua Master series of boats includes boat models with a length of 240 to 300 cm, with a cylinder diameter of 360 or 400 mm. All of them have two inflatable compartments, the PVC fabric density is 750 g/sq.m. Boats in this series can be equipped with a mounted transom, on which you can install a boat motor with a power of up to 2.5 l/s. The boats of the Aqua Master series are designed for 2-3 people.

The Aqua Motor series of boats includes boat models with a length of 260 to 320 cm, with a cylinder diameter of 360 or 400 mm. All of them have two or 3 inflatable compartments, the density of PVC fabric can be 750, 800 or 850 g/sq.m. All boats in this series are equipped with a transom on which you can install a boat motor. The bottom of boats in this series can be either a simple tension one, or with an additionally installed sling-book. The boats of the Aqua Motor series are designed for 2-3 people.

The Aqua NDND Motor series of boats includes boat models with a length of 320, 340 or 360 cm, with a cylinder diameter of 420 mm. All of them have 3 inflatable compartments, plus an inflatable bottom, the PVC fabric density is 900 g/sq.m. All boats in this series are equipped with a transom on which you can install a boat motor. The boats of the Aqua NDND Motor series are designed for 3-4 people.

Frigate

The Fregat company is one of the largest manufacturers of PVC boats in our country, existing since 1991. The company is located in St. Petersburg. Frigate boats are used by the Ministry of Emergency Situations, the Federal Border Service, FSB special forces, hunters and fishermen. The Fregat company was the first in the country to introduce new technologies in the production of PVC boats: in 1999, the company was the first in Russia to develop boats with a high-pressure inflatable bottom; in 2000, the Fregat company produced the first boats in Russia with a variable-section cylinder; in 2001, the company was the first in Russia produced boats with a bow ramp and bulwarks.

The Fregat company produces inflatable PVC boats in 11 different series, different in design and intended use.

Frigate series M boats are rowing boats, without a transom, not intended for installation of a boat motor. The length of the Frigate M series boats is from 2 to 3 meters, with a cylinder diameter from 280 to 400 mm. All of them have two inflatable compartments. Tension type floor.
Frigate series E boats are economical class inflatable motor boats. The length of the Frigate series E boats is from 230 to 320 cm, with a cylinder diameter of 280, 360 or 400 mm, depending on the model. Inflatable compartments 2 or 3. Folding floor (floor) made of high-quality marine plywood.
Frigate series C boats are classic two-color motor boats. The length of the Frigate series C boats is from 290 to 430 cm, with a cylinder diameter from 410 to 520 mm, depending on the model. There are 4 or 5 inflatable compartments. All boats in the series have a folding floor (floor) made of high-quality marine plywood.
Frigate series F boats are PVC inflatable boats with an additional inflatable bulwark. The Fregat series of boats with a bulwark was specially developed in 1999 for the needs of the rescue services of the Ministry of Emergency Situations. The bulwark enhances the longitudinal rigidity of the boat hull and adds 2 additional air compartments. Boats with bulwarks are designed for sailing at a considerable distance from the shore, on large rivers, reservoirs, lakes and seas. The length of the Frigate series F boats is from 350 to 430 cm, with a cylinder diameter from 470 to 520 mm, depending on the model. There are 6 or 7 inflatable compartments.
Frigate Pro series boats are classic PVC motor boats with improved performance characteristics. The length of the Frigate Pro series boats is from 290 to 370 cm, with a cylinder diameter from 450 to 490 mm, depending on the model. There are 4 or 6 inflatable compartments for the model with a bulwark.
Frigate boats of the Air series are inflatable motor boats made of PVC with an inflatable multi-balloon high-pressure bottom. The length of the Frigate Air series boats is from 310 to 420 cm, the diameter of the cylinder is from 430 to 520 mm, depending on the model. There are 4 or 6 inflatable compartments for models with a bulwark.

The Fregat company produces 5 series of boats with a high-pressure multi-balloon bottom, these are the FM Light, FM Lux, FM L, FM Jet, FM Light Jet series of boats. Frigate boats of the FM Light series have a bottom consisting of three cylinders, but do not have protective aprons or bulwarks. Frigate boats of the FM Lux series have a bottom consisting of three cylinders, a protective apron and a bulwark. The Frigate boats of the FM L series have a bottom consisting of three cylinders, a protective apron and bulwark, as well as a transom for an outboard motor with an L-type deadwood. The Frigate boats of the FM Light Jet series have a bottom consisting of three high-pressure cylinders and a transom for a jet outboard engine . Frigate boats of the FM Jet series have a bottom consisting of three high-pressure cylinders, a transom for a jet boat engine, a protective apron and a bulwark.

Hunter

Hunter PVC boats have been produced by the Hunter Manufacturing and Trading Company, located in St. Petersburg, since 2009. The company produces a large number of models of inflatable boats, different sizes, designed for different areas of application.

The Hunter 250 and Hunter 280 are inflatable rowing boats that are not designed for use with an outboard motor. The boats are made of PVC fabric with a density of 750 g/sq.m. German made. The bottom of the boats is simple tension, there are two simple floorings. The seats of the boat are secured using the “liktros-likpaz” system and can be moved, installed in a place convenient for you.

The Hunter 280 T and Hunter 300 LT boats are motor-rowing boats with a hinged transom designed for installing a low-power outboard motor.

Boats Hunter 290 R, Hunter 290 L, Hunter 290 LK, Hunter 320 L, Hunter 290 LK, Hunter 335, Hunter 340, Hunter 360 are PVC motor inflatable boats designed for hunting, fishing and outdoor activities. Boats have different lengths, diameters of cylinders, number of cylinders and different densities of PVC fabric. The boats are made of PVC fabric with a density of 750 g/sq.m. German made. Everyone will be able to choose a boat that suits them according to their individual requirements.

The PTK Hunter company also produces a series of PVC Stealth boats. The length of Stealth series boats is from 255 to 375 cm, with a cylinder diameter from 400 to 480 mm, depending on the model. Stealth boats have three inflatable compartments, plus an inflatable keel. The boats are made of PVC fabric with a density of 750 g/sq.m. German made. Boats of the Stealth series have a two-tone design, gray and blue.

Riviera

Riviera boats are produced by the Boat Master enterprise located in the city of Ufa. The Boat Master company was founded in 1993 and is currently one of the largest manufacturers of inflatable boats in Russia. The Boat Master enterprise produces inflatable boats under 5 brands: Riviera, Taimen, Aqua, Apache and RUSH.

Under the Riviera brand, 4 series of inflatable boats are produced: Riviera Compact, Riviera Maxima, Riviera NDND Hydroski and Riviera Keelevoe Inflatable Bottom.

The Riviera Compact series of PVC boats includes boat models with a length of 290 to 360 cm, with a cylinder diameter of 420 or 460 mm. All of them have 3 inflatable compartments, the PVC fabric density is 900 g/sq.m. All boats in this series are equipped with a transom on which you can install a boat motor. The bottom of boats in this series can be of different types: tension bottom with an installed sling-book, NDND. Additionally, a keel can be installed. Boats of the Riviera Compact series are designed for 3-4 people, depending on the model of the boat.

The Riviera Maxima series of PVC boats includes boat models with a length of 340, 360 or 380 cm, with a cylinder diameter of 460 or 520 mm. All of them have 3 inflatable compartments, the PVC fabric density is 1100 g/sq.m. All boats in this series are equipped with a transom on which you can install a boat motor. The bottom of the boats in this series is equipped with a sling-book. Boats of the Riviera Maxima series are designed for 3-4 people, depending on the model of the boat.

The series of PVC boats “Riviera NDND Hydroski” includes boat models with a length of 320, 360 or 400 cm, with a cylinder diameter of 460 or 520 mm. All of them have 3 inflatable compartments, PVC fabric density is 900 or 1100 g/sq.m. depending on the model. All boats in this series are equipped with a transom on which you can install a boat motor. The bottom of the boats in this series is equipped with a bottom of the NDND-hydroski type, additionally reinforced with protection. Boats of the “Riviera NDND Hydroski” series are designed for 3, 4 or 6 people, depending on the boat model.

The series of PVC boats “Riviera Keel Inflatable Bottom” includes boat models with a length of 360, 380 or 430 cm, with a cylinder diameter of 460 or 520 mm. All of them have 3 inflatable compartments, the PVC fabric density is 1100 g/sq.m. All boats in this series are equipped with a transom on which you can install a boat motor. The bottom of the boats of this series is of the NDND type with an additionally installed keel. Boats of the Riviera Keel Inflatable Bottom series are designed for 4, 5 or 8 people, depending on the boat model.

Flagship

Flagman boats are produced by the Flagman company, located in St. Petersburg and engaged in the production of inflatable boats since 2005.

The Flagman company uses durable and reliable PVC fabric produced by the Korean company MIRASOL for the production of its PVC boats; the density of PVC fabric is 850, 1050 or 1200 g/m².

A distinctive feature of all Flagman boats is an inflatable keel bottom.

Boats Flagman 280 NT and Flagman 300 NT are rowing boats with a length of 280 and 300 cm, a cylinder diameter of 400 mm. The boats have two inflatable balloons and an inflatable keel bottom. The seats of the boat are secured using the “liktros-likpaz” system and can be moved, installed in a place convenient for you.

Flagman motor boats are produced with a hull length from 280 to 450 cm, a cylinder diameter from 460 to 500 mm. The number of inflatable cylinders can be 3 or 4, plus an inflatable keel bottom. The density of PVC fabric is from 850 to 1200 g/sq.m., depending on the boat model.

Double-hull boats of the Flagship DK series are available with hull lengths from 320 to 550 cm, cylinder diameter from 400 to 430 mm. The number of inflatable cylinders is 3, plus an inflatable keel bottom. The density of PVC fabric is from 850 to 1200 g/sq.m., depending on the boat model.

The flagship DK Jet series water-jet boats are available with a hull length from 320 to 550 cm, and a cylinder diameter of 430 mm. The number of inflatable cylinders is 3, plus an inflatable keel bottom. The density of PVC fabric is from 850 or 1200 g/sq.m., depending on the boat model.

Flagship airboats of the DK Air series are available with a hull length from 350 to 550 cm, and a cylinder diameter of 430 mm. The number of inflatable cylinders is 3, plus an inflatable keel bottom. The density of PVC fabric is from 850 or 1200 g/sq.m., depending on the boat model.

Gladiator

Gladiator boats are manufactured at a factory in China, in the city of Weihai. In the production of boats, Korean-made PVC fabric is used. The plant employs more than 60 employees and has its own quality department, which controls the quality of boats released from production.

According to the Gladiator boat manufacturer, the PVC fabric from which the boats are made has a 5-year warranty, the boat seams have a 3-year warranty, and the boat components have a 1-year warranty.

Gladiator boats can have 3 floor options

AirDeck AD(removable monolithic high-pressure inflatable bottom). Does not collapse under the weight of a person. Main advantage AirDeck, the lightest weight among all floorboards.
Plywood flooring DP It is made of moisture-resistant laminated plywood of the FSF brand, produced in Russia, in an aluminum profile with a set of aluminum stringers. The stringers are placed on aluminum guides, which greatly simplifies the assembly and disassembly of the boat and extends the service life of the floorboards.
Aluminum floor AL — WithThe most convenient type of floor: it does not need to be dried, it cannot be scratched or punctured.It hasanti-slipwownotchy andsetfits inaluminummistringerami.

IN series(A) Simple PVC Gladiator boats include the following boats:

PVC rowing boat Gladiator- PVC fabric with a density of 850 g/m2 is also made, the boat has 2 seats, a tension floor, there is a plywood slate, the boats are produced in two colors: gray and green, the boats come in 5 sizes: 220, 240, 260, 280, 300 cm
Motor rowing boat PVC Gladiator NTN— made of PVC fabric with a density of 850 g/m2, the boat has 2 seats, a flat glued-in keelless inflatable bottom, there is a hinged transom, the color of the boats is gray, the boats come in 2 sizes: 280, 300 cm
Motor rowing boat PVC Gladiator TN— made of PVC fabric with a density of 850 g/m2, the boat has 2 seats, a flat glued-in keelless inflatable bottom, there is a stationary glued-in transom, the color of the boats is gray, the boats come in 2 sizes: 280, 300 cm
Motor rowing boat PVC Gladiator TK— made of PVC fabric with a density of 850 g/m2, the boat has 2 seats, an inflatable keel, there is a stationary glued-in transom, the color of the boats is green, the boats come in 3 sizes: 280, 320, 340 cm

The series (B) Active PVC Gladiator boats includes the following boats:

PVC boat Gladiator Light series - The boat's cylinders are made of PVC fabric with a density of 850 g/m2, the bottom of the boat is made of PVC fabric with a density of 1100 g/m2, the boat has 2 seats, three options for the bottom of the boat are possible: AD - AirDeck (removable inflatable bottom), DP - plywood flooring and AL - aluminum floorboard, the boat has a stationary glued transom and an inflatable keel, the cylinders and keel of the boat are covered with special armor, the color of the boats is white and blue, the boats come in 4 sizes: 270, 300, 330, 370 cm

Series (C) Light PVC boats Gladiator includes the following boats:

PVC boat Gladiator Active series - made of PVC fabric with a density of 1100 g/m2, the boat has 2 seats, two options for the bottom of the boat are possible: DP - plywood floor and AL - aluminum floor, the boat has a stationary glued transom and an inflatable keel, the cylinders and keel of the boat are covered with special armor, boats come in 4 sizes: 330, 370, 400, 420 cm

The series (D) Professional PVC Gladiator boats includes the following boats:

PVC boat Gladiator Professional- made of PVC fabric with a density of 1350 g/m2, the boat has 2 seats, two options for the bottom of the boat are possible: DP - plywood floor and AL - aluminum floor, the boat is equipped with a bulwark, the boat has a stationary glued-in transom and an inflatable keel, cylinders and a keel the boats are covered with special armor, the color of the boats is red and black, the boats come in 7 sizes: 330, 370, 400, 420, 450, 470, 500 cm

The (HD) Heavy Duty series of PVC Gladiator boats includes the following boats:

PVC boat Gladiator Heavy Duty- PVC fabric with a density of 1100 g/m2 is also made, the boat has 2 seats, the bottom of the AL boat is aluminum payol, the boat has a stationary glued-in transom and an inflatable keel, the cylinders and keel of the boat are covered with special armor, the color of the boats is light gray, the boats come in 4 sizes: 350, 370, 390, 430 cm

The series (AIR) NDND of PVC Gladiator boats includes the following boats:

PVC boat Gladiator NDND - boat cylinders are made of PVC fabric with a density of 1100 g/m2, the bottom of the boat is made of PVC fabric with a density of 1350 g/m2, the boat has 2 seats, an inflatable low-pressure bottom, the boat has a stationary transom on a cushion, cylinders and a keel the boats are covered with special armor, the color of the boats is digital camouflage, the boats come in 4 sizes: 330, 350, 380, 420 cm, the boat is well suited for rafting and rafting on shallow and mountain rivers

The RIB Gladiator series of boats includes the following boats:

Boat RIB Gladitor - the boat cylinders are made of PVC fabric with a density of 1100 g/m2, the boat has 2 seats, the boat has a rigid non-folding frame-forming bottom, the boat has a stationary transom, the boat cylinders are covered with special armor, the color of the boats is digital camouflage, boats There are 5 sizes: 320, 350, 360, 380, 420 cm

Admiral

Admiral boats have been produced since 2009 in the city of St. Petersburg by the Admiral company. In the production of boats, high-quality PVC fabric produced by the German company MEHLER is used.

To series naduvnaXcombsXlodOToAdmiral includes boats with a length of 260, 280 and 300 cm. The diameter of the cylinders is 400 mm. The boats have 2 inflatable compartments. The boats are equipped with 2 seats secured using the lyctros-likpaz system, which allows them to be moved and installed in a place convenient for you. Boats can be equipped with a hinged folding transom, which allows the use of a low-power outboard motor.

To series lodOToPVCAdmiral Classic includes boats with lengths of 305, 320, 330, 335 and 350 cm. The diameter of the cylinders can be 400 or 450 mm, depending on the boat model. All boats in the series have 3 inflatable compartments. The boats are equipped with 2 seats secured using the lyctros-likpaz system, which allows them to be moved and installed in a place convenient for you. The boats have a permanent transom, which allows them to use outboard motors of appropriate power. The floor of the boats consists of five sections of floorboards, which are made of moisture-resistant laminated plywood 9 mm thick; the floorboards have an anti-slip surface. To a series of boats Admiral Classic boats with extended equipment are also included Admiral Classic Lux, which have a bow awning and a set of linings.

Series lodOToPVC Admiral Sport created with an emphasis on speed, quick glide, good maneuverability and seaworthiness. Into series Admiral Sport includes boats with lengths of 320, 340, 360, 375 cm. The diameter of the cylinders can be 400 or 450 mm, depending on the boat model. Boats in the series can have 3 or 5 inflatable compartments. The boats are equipped with seats secured using the lyktros-lykpaz system, which allows them to be moved and installed in a place convenient for you. The boats have a permanent transom, which allows them to use outboard motors of appropriate power. The floor of the boats consists of five sections of floorboards, which are made of moisture-resistant laminated plywood 9 mm thick; the floorboards have an anti-slip surface.

Boat series Admiral Comfort represented by a boat Admiral 330 CF. The Admiral company, which produces this boat, describes it as a workhorse with a sporty character. The length of the boat is 340 cm. The diameter of the cylinders is 450 mm. The boat has 3 inflatable compartments. The seats of the boat are secured using the lyktros-lykpaz system. The bottom of the boat is a collapsible floor made of moisture-resistant laminated plywood.

Boat series Admiral NDND are boats with a low-pressure inflatable bottom. The bottom of boats of this type has many advantages: a boat with a low-pressure bottom weighs less, is assembled faster, and takes up less space when disassembled. The bottom of the NDND is not inferior in rigidity to the bottom of a boat with a standard plywood floor. To a series of boats Admiral NDND includes boats with lengths of 290, 320, 330, 350, 380 and 410 cm. The diameter of the cylinders can be 400, 450 or 500 mm, depending on the boat model. The number of inflatable compartments is 3 or 4. The seat fastening is standard for Admiral boats, the lyktros-lykpaz system.

Solar

The Solar boat is produced by the Solar company located in the city of Novosibirsk. Currently, the Solar company is one of the largest companies producing PVC boats in Russia and the CIS countries.

In the manufacture of Solar boats, high-quality PVC fabrics are used: produced by the Finnish company Scantarp, the Czech company MEHLER and the German company HEYTex. The seams of Solar boats are glued end-to-end with polyurethane-based glue and additionally glued on both sides with PVC fabric. The Solar company provides a 2-year warranty on PVC fabric, seams and components of its boats.

All SOLAR boats have a V-shaped inflatable bottom glued into the sides and bow of the boat, the rigidity of the floor is comparable to that of RIB boats, several adults can stand on the floor without the bottom sagging.

Solar boatseriAndOptima - have a keel inflatable bottom. The Solar Optima series boats are designed for fishermen and hunters in Central Russia who do not need additional layers of bottom and floor protection. Solar boats of the Optima series have a successful combination of weight, quality and cost. Optima series boats have welded seams. Length of Solar Optima series boats: 310, 330, 350, 380 cm.

Solar boatseriAndMaxima - have a keel inflatable bottom, which additionally outside reinforced with a layer of PVC fabric, and glued from the inside with a protective non-slip layer of fabric. On a Solar Maxima series boat you can safely sail through shallow oxbow lakes, reed thickets and flooded snags. Length of Solar Maxima series boats: 310, 330, 350, 380, 420, 450, 500, 555 cm.

Solar boatseriAndJet Tunnel - They are based on a water tunnel and are designed for installation of water-jet engines. The Solar Jet Tunnel series boat allows you to navigate mountain, rapids, and super-shallow rivers. The boat is capable of passing through practically waterless bodies of water in planing mode; it only needs 5-7 cm of water to move. Length of Solar Jet Tunnel series boats: 380, 420, 450, 470, 500, 520, 600 cm.

Solar boatseriAndMK - low-keel PVC boats designed for long trips along shallow mountain rapids rivers, as well as reservoirs with strong waves. Solar MK series boats are well suited for family travel, rafting and fishing. Length of Solar MK series boats: 400, 450, 555 cm.

Caiman

Cayman boats are produced by a well-known company from St. Petersburg, Mnev and K. The company "Mnev and K" has experience in the production of inflatable boats of various types since 1988. For more than thirty years, the company has developed and put into mass production more than 70 models of motor-rowing, motor boats and RIB boats of various sizes.

In addition to Cayman boats, the company’s model range includes boats of various series: “Skif”, “Murena”, “Vuoksa”, “TUZ”, “Scat”, “Favorite”, as well as boats under the “KORSAR” brand of “Botsman” models ”, “J.Silver”, “Combat”, “Komandor” and “Admiral”.

The boats are made from high-quality PVC fabric made in Germany and South Korea. The seams of the boats are made by welding, which ensures their high strength and reliability.

The Cayman PVC boat series includes the following boat models:

Boat Cayman 275- has a length of 275 cm, the diameter of the cylinder is 360 mm, the boat has 3 compartments, the density of PVC fabric is 850 g/m2, the boat has welded seams, the bottom of the boat is made in the form of slatted flooring
Boat Cayman 28 5 - has a length of 285 cm, the diameter of the cylinder is 360 mm, the boat has 3 compartments + an inflatable keel, the density of PVC fabric is 850 g/m2, the boat has welded seams, the bottom of the boat is made in the form of plywood floors
BoatPVCCayman N-300- has a length of 300 cm, the diameter of the cylinder is 390 mm, the boat has 3 compartments + an inflatable keel, the density of PVC fabric is 850 g/m2, the boat has welded seams, the bottom of the boat is made in the form of hard flooring
BoatPVCCayman N-33 0 - the most popular among Cayman boats, has a length of 330 cm, the diameter of the cylinder is 420 mm, the boat has 3 compartments + an inflatable keel, the density of PVC fabric produced by the German company Mehler is 850 g/m2, the boat has welded seams, the boat can have an inflatable bottom low pressure and hard flooring with a thickness of 9 or 12 mm
BoatPVCCayman N-36 0 - has a length of 360 cm, the diameter of the cylinder is 470 mm, the boat has 3 compartments + an inflatable keel, the density of PVC fabric produced by the German company Mehler is 1000 g/m2, the boat has welded seams, the bottom of the boat is made in the form of hard flooring
BoatPVCCayman N-38 0 - has a length of 380 cm, the diameter of the cylinder is 470 mm, the boat has 3 compartments + an inflatable keel, the density of PVC fabric produced by the German company Mehler is 1000 g/m2, the boat has welded seams, the bottom of the boat is made in the form of hard flooring
BoatPVCCayman N-40 0 - has a length of 400 cm, the diameter of the cylinder is 520 mm, the boat has 4 compartments + an inflatable keel, the density of PVC fabric is 1100 g/m2, the boat has welded seams, the bottom of the boat is made in the form of hard flooring

Apache

Apache boats are produced by the Boat Master enterprise located in the city of Ufa. The Boat Master company was founded in 1993 and is currently one of the largest manufacturers of inflatable boats in Russia. The Boat Master enterprise produces inflatable boats under 5 brands: Riviera, Taimen, Aqua, Apache and RUSH.

Under the Riviera brand, 3 series of inflatable boats are produced: “Apache SK”, “Apache NDND”, “Apache Rowing”.

The Apache Rowing PVC boat series includes boat models with lengths of 220, 240, 260 and 280 cm, with a cylinder diameter of 340 or 3600 mm. All of them have 2 inflatable compartments, the PVC fabric density is 750 g/sq.m. The bottom of the boats in this series is simple tension. All Apache Rowing boats are rowing, have a capacity of 1-2 people, and are not designed to install an outboard motor.

The Apache SK series of PVC boats includes boat models with a length of 330, 350 or 370 cm, with a cylinder diameter of 480 mm. All of them have 3 inflatable compartments, the PVC fabric density is 1000 g/sq.m. All boats in this series are equipped with a transom on which you can install a boat motor. The bottom of the boats in this series is equipped with a sling-book. Boats of the Apache SK series are designed for 3, 4 or 5 people, depending on the boat model.

The “Apache NDND” series of PVC boats includes boat models with a length of 330, 350 or 370 cm, with a cylinder diameter of 480 mm. All of them have 3 inflatable compartments, the PVC fabric density is 1000 g/sq.m. All boats in this series are equipped with a transom on which you can install a boat motor. The bottom of the boats in this series is of the NDND type. Boats of the Apache NDND series are designed for 3, 4 or 5 people, depending on the boat model.

Fishing on the lake, rafting on the river or just a walk along the reservoir - all this can be done with comfort and safety only on one of the best PVC boats presented in this rating. Such watercraft are very convenient, because they can be lowered, disassembled and taken with you at any time, even in your hands. But here you need to keep in mind that the huge selection can easily confuse even an experienced buyer. That’s why we present you this TOP, compiled based on reviews from product owners.

Which company to choose a PVC boat

The most the best manufacturers boats can be called:

The ark– offers a number of series of “Lotsman” products at once; he independently develops, produces, and sells them. For this, the company uses fabrics based on polyvinyl chloride from several layers from famous brands Mirasol and Scantarp.

Boat Master is a Russian manufacturer of inflatable small-sized floating transport. The main office and production are located in Ufa, Russia. It was founded in 1993 and during this time it created several brands: Riviera, Aqua, Taimen and some others. She has several patents, certificates and awards for producing quality products.
Admiral- This is another company with a selection of watercraft for traveling on a river, lake and even going to sea; for the latter there is a special series of products. Some of them can be up to 5 m long and can accommodate more than 3 people, something you don’t see often.
Frigate– the company released the first inflatable watercraft made of polyvinyl chloride in 1991. Today its assortment includes series for children, with NDND (inflatable bottom) of economy and premium class.

Rating of the best PVC boats

Its compilation would have been impossible without feedback from owners of such small rubber boats. When analyzing them, we took into account how convenient, safe, useful and practical this or that model is, as well as whether its quality corresponds to the established price.

Of the technical characteristics, the following were taken into account:

Weight, width, depth, shape and length of the product;

The height of the sides determines whether water will get inside;
Type of stern, is it raised, as this gives additional stability;
Maximum weight supported;
Number of seats;
Quality of fittings, including oars and barrels;
Bottom type (inflatable or hard);
Equipment;
Strength and quality of fabric, number of layers;
Recommended motor power;
Number of air compartments and size of cylinders;
Color.

Best PVC Inflatable Rowing Boats

Such models are usually not very expensive; they cost several times less than those designed for a motor. Most often, they are characterized by a simple design and small size. They are mainly used by fishermen or hunters, but for long rafting trips this is not the best option.

Pilot C-200

Let's start the review with this offer, which in our rating can be called the best for fishermen who are going to go sailing alone. This single-seat model has a non-inflatable bottom made of a thick layer of reinforced polyvinyl chloride. Therefore, it is not surprising that reviews write about the convenience of fishing even while standing. Naturally, the product is small and therefore very light, but at the same time it stays quite reliably on the water, does not tip over and feels confident when turning.

The “Lotsman C-200” model has a well-placed seat, almost in the middle. But sitting on it for a long time can be uncomfortable due to its rigidity. Since this is a rowing-type watercraft, the set includes two oars, which are considered quite comfortable for long-term use. Separately, it should be noted the high quality of the seams, applied end-to-end and reinforced with fabric, which makes the alloy even safer.

Advantages:

Feels confident in small waves;
Strong sidewalls;
Maneuverability;
Light weight;
Strength of materials;
There are several colors.

Flaws:

Load capacity is below average (100 kg);
Small oars;
It's still cramped for two people on board.

The Pilot C-200 boat weighs just under 9 kg, which makes it easy to transport. It will always be safe and sound thanks to the included backpack.

Aqua Optima 260

This is one of the most durable and lightest models in our rating. Its owners note in reviews that the air in it is held reliably, it is easy to inflate and, if necessary, deflates without problems. True, its bottom is not inflatable. The reliability of this option lies in the fact that it can stay afloat even if one of the compartments is punctured, since there are two of them.

The Aqua Optima 260 boat does not have a keel, but despite this, it handles quite well when turning. It is quite easy to control it with the help of oars that come with a pump, oarlocks, and a rope. The disadvantages include hard, uncomfortable seats.

Advantages:

Light weight without equipment;
Excellent handling;
Quality of fittings;
Good seam sealing;
Budget model.

Flaws:

There is too little space for two;
The seats are located very close to each other;
Oars can shift and fall off when rowing.

The length of Aqua Optima is 260 cm, which partly explains its low weight of 13 kg. It has a simplified design with a minimum number of seams, which reduce the likelihood of damage to the product. The board can carry a maximum of 220 kg. The characteristics of this model are not the best, but, as for a budget model, they are quite acceptable.

When planning a long voyage, you need to buy a good inflatable mattress in advance.

The best motor rowing boats made of polyvinyl chloride

Such options are relevant for those who plan long rafting trips on large rivers or lakes. These craft can be controlled using oars or a motor can be installed on them if there is a transom. But they all require registration with the Ministry of Emergency Situations.

Admiral 280T

In this rating, this model is the golden mean between economical and expensive. According to reviews from the owners, it is quite comfortable; instead of hard seats, there are soft barrels built in on the sides, and there is an optimal distance between them. The watercraft is suitable for rafting two people, but can withstand a maximum of 210 kg. The non-inflatable bottom, on the one hand, makes swimming safer, but on the other hand, it complicates the assembly of the product, just like a collapsible bottom.

This model cannot boast of large dimensions; its length does not exceed 280 cm. The motor power rating is 3.5 hp. also not the most impressive, but, in general, that is why it was included in the rating of the best rowing motor boats. The manufacturer has added oars to the set, for which special holders are provided. The raised stem allows you to develop speed faster and increases the “vessel’s” resistance to water.

Advantages:

Walking;
Good side diameter;
Overpriced feed;
Good quality fittings;
Excellent pump pump;
Easy.

Flaws:

The oarlocks squeak and need lubrication;
Valve springs rust quickly, the product must be dried thoroughly;
Poor bottom protection from water.

According to user reviews, the Admiral 280T is very convenient for fishermen who want to fish while standing.

Riviera 3200

This transom boat was produced by the Master Boat factory, which is quite famous in this market. It is characterized by increased stability on the water due to the built-in transom and dense inflatable keel. Its sides have optimal rigidity and height, which, in particular, made it possible to fix comfortable mobile seats for two people on them at a comfortable distance. The watercraft is really roomy, because its length is 3.2 m, and it can safely take up to 500 kg of cargo.

It is obvious that the Riviera 3200 model is designed, if not for professional use, then certainly for frequent use. Being designed for a motor with a power of up to 15 hp, it easily moves along reservoirs, rivers, and lakes. But fishermen may have some difficulties, since there is no holder for fishing rods. A collapsible plywood floor allows you to feel more comfortable on the “deck”, but at the same time increases the time for assembling the boat.

Advantages:

Easy floor assembly;
Quality materials;
No unpleasant smell;
Quite dense walls;
Beautiful colour;
Reliable seams;
Diameter of cylinders;
Cockpit width.

Flaws:

Asymmetrical gluing;
No fabric reinforcement under the stringers;
Unreliable fastening of the front cylinder valve cover;
There is play at the junction of the pipes;
The tapes that cover the gaps often come off.

Special attention It’s worth paying attention to the package: the set includes a pump, oars, and a lifeline.

This is another pretty good rowing model, designed to install a motor, but a powerful one, of course, will not fit here, up to a maximum of 2.5 hp. And again, here, like other models from this rating of the best PVC boats, the bottom is non-inflatable. But if necessary, you can use the removable option included in the kit. It is not the most spacious, its width is 1.28 m and its length is 280 cm, but due to the expansion of the stern there is room to store fishing gear.

Like most inflatable two-seater watercraft of this format, the balloon is divided into 2 parts. Thanks to this, if the integrity of the walls of a polyvinyl chloride product is damaged, it will be possible to continue to control it with the help of oars while remaining afloat. Everything would be just fine if it weren’t for the weight of 16 kg, although for two people, which is what the boat is designed for, this will not be much of a problem.

Advantages:

Spacious;
Durability of polyvinyl chloride fabric;
Compact when assembled;
Easy to transport;
Reliable valves;
Excellent air retention.

Flaws:

The pump is rather weak;
Unreliable transom fixation;
The seats are not very good; they fall out if the boat is not fully inflated.

Judging by the reviews of the Frigate M-3, it is obvious that the manufacturer played it safe when it indicated a limit on the maximum accepted weight of 220 kg; in fact, it is slightly higher.

Which PVC boat is better to buy?

If there will be 2-3 people in one craft, then it is desirable that its length be at least 3 m. The barrels should be located at a sufficient distance so as not to touch the neighbor with oars. By the way, during a long voyage it will be very uncomfortable to sit on plastic and wooden seats. For those planning to fish while standing, it is better to give preference to options with a hard bottom.

When choosing a specific model from this TOP of the best PVC boats, you need to consider the following:

For those who go fishing rarely and for a short time, for example, on a calm and small river, you can buy inexpensive rowing-type models - Pilot C-200 or Aqua Optima 260.
Those who want to go rafting for several days will find it difficult to control the oars all the time. In this case, the product must have a transom for installing the motor. Then it won't be a mistake to choose quite a good option Frigate M-3.
If 3 people plan to sail in the boat at once, as well as for professional use, for example, by rescuers, the Riviera 3200 will be relevant.
Those who are going to fish or swim in rivers or lakes with a lot of thickets should take a closer look at the Admiral 280T model, which overcomes them perfectly.

You can buy the best PVC boat only when you have confidence in its stability, strength, practicality and safety. It was precisely these indicators that we primarily focused on when compiling this rating; we hope it will help you choose the right model for you.

vyborexperta.ru

Yaroslavl and Ufa plants

The factories of JSC Yaroslavl-Rezinotekhnika and JSC UZEMIK produce a total of about 70 models of PVC boats.

Of these, the most popular models are:

Ibis 20

Price $640.

Boat with an inflatable keel 310 cm long and a carrying capacity of 375 kg. On the bottom there is a rigid sheet of laminated marine plywood. Designed for use with a motor with a maximum power of 10 HP. With. The line includes 4 models for engines with power of 6, 8, 10, 20 hp. With. The boat hull is equipped with a fender. The boat is packed in two cases and equipped with two hard seats, dismountable duralumin oars, a foot pump, and a repair kit. The price of the boat is $525.

Price $525.

ML-2

The smallest PVC motor boat produced by the Ufa plant OJSC "UZEMIK" with a length of 250 cm and a carrying capacity of 300 kg. The permissible maximum engine power is 8 liters. With. The assembled boat itself weighs 42 kg. The bottom is made of collapsible hard slate. Three independent air compartments. Price $236.

Price $236.

Karaidel-44

Price $640.

Manufacturer Mnev and K

Price $565.

Price $1165.

Manufacturer Leader

Price $367.

Heavy boat with a carrying capacity of 1100 kg. Has 4 independent compartments and an inflatable keel. Designed to work with a motor with a maximum power of 40 hp. With. The bottom is made of hard flooring. Based on the stated characteristics, it can take on board any small car: Zaporozhets, Oka, Smart. In addition to the standard equipment, it is equipped with two overpressure valves. Price $980.

Price $980.

Manufacturer Solar

Solar 330

The most popular boat size is 330 cm and its own weight is only 39 kg. The boat's cylinders are made of Viniplan 6379 fabric, it has a density of 1100 g/m⁰. The transom is installed not behind the bottom, but on the bottom. The seats are made of moisture-resistant laminated plywood. The deck is very hard. The maximum motor power for this boat is 15 hp. With. Includes: oars, foot pump, seats, repair kit, valve key. Price $750.

Price $750.

Materials used in the manufacture of Russian-made inflatable boats

Just like all over the world, at Russian enterprises that manufacture inflatable boats, the main production material is PVC - polyvinyl chloride and synthetic fabrics.

Fabrics determine the elasticity of the structure, for example, polyester fabric is stiffer than polyamide. The elasticity of polyamide fabric gives it better tensile test performance.

By itself, polyvinyl chloride is a hard substance, but with the addition of polyurethane, the alloy becomes suitable for making strong and flexible inflatable boats.

How to choose the right Russian-made inflatable boat

Tuning of Russian-made inflatable boats

Tuning an inflatable boat means making it heavier, so don’t overdo it.

However, on board it would not hurt to have an echo sounder, speedometer, GPS navigator, barometer, bow electric motor with remote control, windshield wipers, awning, audio system, holders for spinning rods (sacred), anchor rollers, spotlights, etc.

First of all, look at the weight. Determine what is more important to you: tuning or speed and consumption.

myownship.ru

Advantages of PVC boats

Modern boats are an excellent solution for those who prefer leisure associated with fishing, water tourism and scuba diving.
Buying a PVC boat for fishing is the dream of many people who prefer fishing in deserted places. A swimming device made of polyvinyl chloride has many advantages compared to similar products made from other materials.

The inflatable boat looks aesthetically pleasing. There are models of different colors, shades, plain or with a pattern.
PVC material is high quality and reliable. It is resistant to aggressive environments, heat, ultraviolet radiation, low temperatures, and does not ignite.
PVC rubber boats are compact and lightweight, weighing up to 11 kg when folded. They are convenient to carry over your shoulders and unfold. In addition, they do not take up much space in the trunk of the car.
The products are wear-resistant and have good load-carrying capacity.
They come with the necessary accessories. The standard package includes oars, a pump, a bag, an inflatable cushion, a certificate of conformity and an instruction manual.
The PVC boat has ideal maneuverability and unsinkability. It is stable in waves, regardless of the depth of the reservoir. If obstacles arise, the product can be easily carried by hand.
PVC inflatable boats with a motor can withstand high pressure and are not afraid of contact with natural objects.
They have a long service life.
Maintaining the product is not difficult - just dry it well. Storage does not require special premises or special conditions. Polyvinyl chloride is a multi-layer fabric on a synthetic basis. It tolerates temperatures well from -40 to +700C.

Types of inflatable boats

Depending on the design features, PVC products come in 3 types:

Rowing - designed to move around small rivers and lakes. They are small in size, as they are designed for 1 or 2 seats, lightweight and have a simple structure. Due to the fact that the inflatable sides of the device are divided into independent sections, it will stay afloat in the event of mechanical damage to the hull. This is a good option for family leisure.
Motor models are large in size, with extended sides and sealed compartments. To move through the water, they use an outboard boat motor, which is mounted on back vessel - transom. For products made of polyvinyl chloride, transoms are made mounted, designed for low-power motors, and stationary, designed for powerful engines.
The PVC motor rowing boat is suitable for traveling on small bodies of water and for coastal navigation. It is used for the motor and oars. The length of the device varies - from 3 to 4 m.

Buying a vessel requires a serious approach and consideration of financial capabilities. The Big Boat Ltd company offers to buy a PVC boat with benefits for buyers, taking into account their tastes and desires. Our website presents modern and inexpensive products. We offer our guests a catalog and prices with a description of the models of swimming equipment. Travel enthusiasts can buy inexpensively the option they like - with a motor or ordinary oars. The price depends on the device model and technical characteristics. Despite the fact that we have the cheapest boats, the quality of goods and service do not lose their importance.

Our products are practical and easy to use. For the manufacture of the presented products, exclusively multi-layer reinforced fabric is used. It does not stretch and is highly resistant to punctures and breakdowns.
Depending on the purpose of use, boats come in different sizes: the length of rowing boats varies from 2000 mm to 2800 mm, for transom models it can range from 2400 mm to 3800 mm.
Welding of the edges of the body is carried out on a HDTV machine. Thanks to this technology, the seam is smooth and strong.
Welded seams are specially reinforced with PVC connecting strips.
To ensure safety, models with several independent sections of inflatable cylinders are designed.
Our products are characterized by increased safety. They have the appropriate splash-proof side and optimal interior space.
To create comfort while fishing, any selected vessel can be additionally equipped with floorboards in the form of a slatted sling, a full-fledged book floor and a low-pressure inflatable liner.
PVC boats produced by Big Boat Ltd are suitable for an electric motor without a hard floor and a gasoline engine with a hard floor.
We provide a guarantee for the products.
Sale of high quality inflatable boats with transportation to any region. On our website everyone can choose new model, buy it cheap and order delivery.

Before purchasing a rubber boat, you need to decide on the purpose and conditions of its use. Based on needs, inflatable boats are divided into types:

sports;
family;
for hunting;
fishing;
for diving underwater.

Sports class PVC boats have a durable floor, a large number of inflatable compartments and a reliable transom for installing a powerful motor. For a family holiday, it is recommended to choose a rowing option that can be equipped with an engine.

If you have the opportunity to go fishing in large bodies of water, it is advisable to buy a PVC motor boat with a hard bottom in the form of a sling-book. For hunting or fishing to be successful, you need to select a vessel with an inconspicuous coloring. The snorkeling device provides a safe exit from the water. It must be stable and have separate sealed compartments. The main criteria for choosing any swimming device are convenience and safety. When purchasing, it is also important to consider:

number of people transported;
maximum load capacity of the device;
type of reservoir;
presence of a motor or oars;
bottom type for comfort.
additional accessories.

big-boat.ru

Boat Manufacturers

Russian boat manufacturers 50 domestic factories. Large brands and new brands of RIB, aluminum, PVC, fiberglass, inflatable rubber, etc. motor boats. Catalog 2018: official websites, addresses, contacts and prices of manufacturers and suppliers. Become a dealer, order a price list!

Russian manufacturers of inflatable and rigid frame boats, when designing and manufacturing their products, strive to take into account the extensive natural and climatic conditions of Russia, the possible conditions of reservoirs, and the operational requirements of numerous fishermen and hunters.

Software for designing sketches and final drawings, automated cutting, manufacturing of component parts and assemblies on high-precision CNC machines allow Russian factories to produce small vessels close to European quality standards.

For the production of inflatable boats (and parts) Russian factories use:

rubberized fabric. Low price of the product, but weak strength. The downside of the material is molding if storage rules are not followed, which characterizes the lowest-budget version of the floating craft.
reinforced five-layer PVC boat fabric. Thermoplastic polymer "PolyVinyl Chloride" is obtained from petroleum and table salt. Reinforcing cord made of lavsan (polyester) provides strength and resistance to penetrating cuts and punctures. The outer polymer layer is waterproof, not destroyed by ultraviolet radiation, and resistant to salt water and fuels and lubricants. The seams can be easily and reliably welded with hot air or glued together with polymer adhesives.
Hypolon. Airtight polymer material. Does not require pumping up the boat for 6 - 10 weeks. Stronger and more durable than PVC. The impossibility of air welding of seams requires additional special equipment.
polyurethane. The best material for boats used in extreme conditions. Durable, plastic, reliably reinforced, easy to glue due to sufficient porosity, and resistant to abrasion.

In the manufacture of rigid-hull boats in Russia, polymer fiberglass mixtures are used, different kinds plywood, rolled aluminum alloy AMg5M. The good ductility of the alloy for pressing and cold stamping, strength, lightness, reliable weldability, and corrosion resistance have ensured the widespread use of the alloy in shipbuilding with the title “marine”.

The online exhibition presents your choice of Russian boat manufacturers and their products. You can wholesale Russian-made boats that meet your preferences and requirements directly from manufacturers, without intermediary trade markups. Regional dealers, don’t miss the chance for fruitful cooperation!

Buy Russian boats at prices without intermediaries, become a dealer of a small boat factory in the region!

productcenter.ru

Rubber boats

The oldest factories for the production of rubber boats are Ufa and Yaroslavl.

Many people know such models as “Ufimka”, “Omega”, “Nyrok”, “Chizh”, etc. But in fairness it must be said that rubberized fabric is gradually leaving the inflatable boat market.

In order to survive in the conditions of fierce competition, these factories are switching to PVC fabric. We see this in the example of the Ufa plant, which is gradually curtailing its rubber series.

Admiral

The company has become widely known relatively recently; it has been competing in the market since 2010, offering consumers not a wide, but a standard set of boats made of PVC.

It is this series that is most popular among buyers, which has allowed the company to short term, to take a strong position in the market producing rowing boats, motor and combined.

A special place is occupied by sports models with a higher class and high rate seaworthiness, with the smallest, 2.8 m long, and the largest 5.2 m.

Mnev and K

One of the largest domestic companies engaged in the production and sale of these products. It is distinguished from its competitors by its very large model range.

The manufacturer's assortment includes six series, which are expanded by several dozen boats each.

In addition, models from the well-known Yamaha company are produced under license from foreign manufacturers.

The popular “Cayman” series is characterized by various sizes of finished products, 2.7-4 m long, with a price starting from 24 thousand rubles.

Among the inflatable boats of this company, you can choose a budget option, for example, Catfish 270. This model will cost you 20 thousand rubles. It is made of PVC fabric and includes excellent equipment in the form of a stationary transom designed for a 5 hp motor. With.

Poseidon

The company has been on the market for more than 20 years, but initially did not produce inflatable boats, and specialists preferred the repair and tuning of inflatable products.

Having engaged in independent production, the company’s management only benefited, thanks to the accumulated experience and modern technologies. With her developments, she managed to quickly conquer the market, saturating it with high-quality and inexpensive products.

Today, the Poseidon company offers an expanded range of 8 series of inflatable boats and 50 models that can satisfy the taste of any consumer.

Each model already has a transom as standard, which is very convenient.

The initial length of the smallest model is 2.8 m, the largest inflatable boat has a size of 5.2 m.

For the production of inflatable boats, the company uses high-quality PVC fabric; even the most budget model is made of polymer with a density of 750 g/m2, and for finishing the bottom the density is increased to 850 g/m2.

The pricing policy allows us to produce budget and expensive models. The simplest boats can be purchased at a price of 23 thousand rubles, and they will be equipped with several independent compartments and are designed to use a 5 liter outboard motor. With.

Rotan

The Russian company, with its head office and production facilities located in St. Petersburg, has been successfully doing business for more than 15 years.

An inflatable bottom is considered a design feature of the boats produced.

The inflatable boats of this Russian company have always been quite lightweight and compact when assembled.

On the water they are fast, have high level comfort and convenience during operation. Lightweight versions of such PVC products will please those who carefully monitor the weight of transported volumes.

The minimum length of a boat from this manufacturer ranges from 3.8 m, and the price for such a product will not exceed 41 thousand rubles. Based on these parameters, it can be classified as a full-fledged motorboat. The fabric density does not exceed 850 g/m2.

This company gained great fame thanks not to boats, but to inflatable catamarans, which remain the main product of the company. Inflatable catamarans have 8 model ranges, the length of which ranges from 3.8 to 6.6 m.

Rotan catamarans can be classified as floating vessels. Their stability is achieved by design features, and buoyancy is equal to the maximum performance of the middle class of inflatable small boats.

They have a spacious cockpit and in the production of such catamarans high-tech PVC is used, the density of which is determined by 1100 g/m2. A model with a length of 3.8 m will cost 72 thousand rubles.

Solar

The product range of this company includes boats with an inflatable bottom, and this tradition has continued since 2002, since its entry into the competitive market.

The designers completely excluded from the boat's equipment all kinds of rigid shapes and elements that weigh down the hull structure.

The model range includes PVC boats from 3.1 to 5.5 m, designed to install a motor, for which they are equipped with a transom. The smallest model in length will cost from 50 thousand rubles.

Flagship

Flagman boats are equipped with an inflatable bottom; they are in great demand among consumers not only due to this technological feature, but also due to their reasonable price.

The most inexpensive model will cost the buyer only 24 thousand rubles. At the same time, the high quality of full-fledged motor boats, represented by models with a length from 2.8 to 4.5 m, is maintained.

Rowing models are not offered to consumers; each product has a built-in transom and a keel bottom.

Frigate

The company has been presenting its products on the market for more than 20 years, and the range includes rowing and motor models, for every taste and at any price.

The bottom of some boat models, unlike competitive analogues, is equipped with several cylinders.

Some models are additionally equipped with effective bulwarks, this ensures increased rigidity of the entire structure of their PVC floating craft.

Rowing boat models with a length of 2.4 m or more will cost the buyer at least 10 thousand rubles, and for a motor - from 14 thousand rubles.

The cost of inflatable boats with a multi-balloon bottom will be 42 thousand rubles.

Boats with a bulwark will be even more expensive; they can be bought for 51 thousand rubles.

Where can I buy

Popular online stores offering Russian-made inflatable boats:
http://www.super-lodka.ru/russia.html;
http://lodki-lodki.ru/;
http://vse-lodki.ru/.

These resources offer an expanded range of swimming equipment for every taste and budget, with additional equipment, and several types of payment.

Excellent prices and high quality of products produced by Russian companies guarantee only positive emotions from the purchase, and excellent technological characteristics make staying in a boat, on the water, safe, convenient and comfortable.

Folk sign: A good, quiet and warm evening, a red sunset and, as a rule, no bite - to the wind and a change in weather!

kakulov.ru

Why buy an inflatable boat?

This is far from an idle question; the answer to it will help determine the size and design of the future inflatable vessel. For example:

Riding along the river with the family, going on picnics to little-visited places;
Fishing in small bodies of water from time to time;
Regular fishing or hunting trips to large rivers, reservoirs, trolling predatory fish(See also: Rating of wobblers for trolling).

In the first case, you need a large (at least 3 meters) boat with a large margin of reliability and decent carrying capacity. It is desirable to have a hard floor. In the second, you can limit yourself to a relatively small (2.40 - 2.70) boat with a light motor (up to 3.5 hp), the bottom can be either rigid or Airdek (inflatable). This will slightly reduce weight, dimensions and assembly and disassembly time. In the latter case, the longer the length, the better.

Powerful motor, floorboards made of marine plywood 12 mm thick, high-quality stringers are a must. The most durable cylinders, it is better if the PVC has undergone additional processing, giving the coating hardness. Then you can safely walk in shallow water, not pay attention to bushes, reed thickets, and not be afraid of protruding snags and stones covered with shells. Yes, it's a lot more expensive, but it's worth it. Particular attention should be paid to the supplied pump. The higher its performance, the faster you will be “on the water”.

Based on the above, I chose the Skat S-330 model manufactured by Mnev and K in St. Petersburg. It is designed for fishing on rivers and lakes with little excitement.

Why was she chosen? Let's start in order. First of all, I liked the shape - a pointed, raised bow (easily passes through coastal thickets), an inflatable keel (feels better on a small wave), a glued transom capable (according to the manufacturer) of carrying a motor with a power of up to 18 hp.

The cockpit is protected from flooding by two transom gussets. At one time I had the opportunity to personally see that at times this is very relevant. The cylinders are not the largest, only 40 cm, but they are connected by welding and made of PVC with a density of 1100 g/m2, and this is already an indicator. The four-section floorboard provides the necessary structural rigidity for running under the motor, especially since the two middle sections fit entirely into the aluminum stringer. And finally, the highlight of the program (for me at least) are two cans (seats) mounted in the lyktros-lykpaz system.

If you have been on boats with two or three, where there is no way to adjust the seat position, you will understand what I mean.

Collapsible aluminum oars complete with hinged oarlocks and fastenings for horizontal fixation - this will surprise few people now, but it’s nice. Four carrying handles and a rope railing around the cockpit provide a wide range of mooring options. In addition, they are quite suitable for attaching all sorts of useful little things: a fishing cage, a net with bait when fishing in the current in the wiring. Finally, you can cool a bottle of beer on a hot day.

Despite the fact that the “Scat S-330” is considered a four-seater, with external dimensions of 330/150 cm, only two people can comfortably fish in it (including equipment). The stated load capacity of 450 kg is also somewhat exaggerated. No, of course you can download it, but it’s not worth it. Overload immediately affects controllability and maneuverability. And if another motorboat passed nearby, then whoever managed to hold on, hold on. When purchasing, I was very confused by the weight of the boat (two bags 55 kg), but nothing can be done about it, such is the price to pay for convenience and reliability. There were no problems with transportation to the reservoir, thanks to the same bags, one 80x65x10 cm, the other 100x60x27 cm. The boat cost more than 30 thousand rubles, but from the first time on the water the “toad” calmed down - the boat is really worth the money.

Purchase

When you come to the store, you have already basically decided on the size and manufacturer, but there is always a possibility that your preference may change. Therefore, we will speak without regard. Of course, they choose the eyes, then adjustments are made depending on financial capabilities. And here it is, your dream!

You need to start communicating with a sales consultant by studying the certificates for the products being sold, and then proceed directly to checking the product. We carefully inspect the transport bags (most likely there will be two of them). They should not show signs of careless storage and transportation. Tears, abrasions, loose seams, torn handles, damaged zippers.

When the boat is removed from the packaging, try to remember how it is folded, this will be very useful in the future, because you will have to repeat this procedure several times. Don't be shy to ask for practice and let them correct you if necessary. Carefully inspect the eye-handle, eyelets for fastening the railing, carrying handles, oar latches and hinged latches. The oars themselves should also be checked for cracks, the tightness of the handles, and the reliability of the connecting unit (there should be a slight tension when connecting).

We check the functionality of the pump and the compliance of the hoses and adapters with the boat valves. We inflate and check the places where the bottom is glued to the cylinders. There should be no wrinkles, distortions, or mechanical surface defects. That's all you can check when purchasing. Time will tell the rest.

Yamaran T280

In the Petroset company’s model range, the smallest is the T-280, but at the same time it has all the necessary attributes inherent in the “big brothers”. The shape of the sides is U-shaped, the ends are conical. An inflatable keel and a rigid floor, reinforced with stringers, provide good stability in small waves. The boat is assembled from PVC with a density of 950 g/m2. Recommended for use with a 3 HP motor.

A good option for fishing and walking along small rivers and lakes (although not very budget-friendly). The two cans are secured with screws. External dimensions 280x153, weight 51, load capacity 330 kg.

Silverado 30F

The F index in the name of the boat, presented by the Petroset Bolshoi company, means the Family subseries. It is equipped with a four-section floor with aluminum stringers. Large stock buoyancy is provided by an inflatable keelson (between the floor and the bottom) and three separate sections of the main cylinder.

Equipped with a transom capable of carrying a motor up to 4.5 hp. Two cans are fixed permanently, there is a railing (along the oars) and handles for carrying (closer to the stern). The total weight of the boat is 54 kg with a carrying capacity of 425 kg. External dimensions – 298/151 cm. Refers to four-seater vessels, but the ideal option is two people and a small cargo. Designed for use on small rivers and lakes with weak waves.

Nordik 360

One of the most popular models of the Petroset Bolshoi company is the mid-size station wagon model Nordik 360. Even the basic version allows you to use a boat with a motor of up to 15 hp, and the upgraded (reinforced) Hardy model can be equipped with a 25 hp motor. The bottom is made of 12 mm waterproof plywood, fastened with aluminum profiles, and reinforced with stringers. The railing is small, but the abundance of tape handles and four transport handles completely compensate for this. The basic model is equipped with two non-adjustable banks on tape seats, and on the Hardy modification - on a lyctros. Boat dimensions 365/173 cm. Diameter of cylinders 46 cm. Weight – 61 kg. Load capacity 540 kg.

Nissamaran

Special series of motor rowing boats Tornado and Musson were developed specifically for operating conditions in Russia. The customer is NISSAMARAN Co ltd. Japan, it also exercises strict control at all stages of production. All seams are glued “overlapping” using a modern welding method, and then additionally glued on top with the same material. The density of PVC used for the manufacture of cylinders is 1100 g/m2, the bottom is 1400 g/m2. Toward the nose, the diameter of the cylinders increases slightly. Starting from a length of 270 cm, all boats are equipped with standard bags located under the seats and a bow locker bag.

Nissamaran Tornado 360

This model is equipped with a collapsible aluminum floor with stringers of a new design, a reinforced transom and increased in height, which allows the use of powerful outboard motors. The bottom received additional protection, the keel was reinforced with a rubber seal, and the lower part of the cylinders (all along) was glued with an additional layer of PVC. Dimensions 360/168, cylinders with a diameter of 45 cm, weight 65, load capacity up to 689 kg. Can be used with a 20-horsepower four-stroke engine and carry five people and cargo.

Admiral 375S

For the production of boats of the Admiral series, PVC with a density of 750 g/m2 produced in Germany (Heytex, Mexler) is used. Bostic glue (French) was used during assembly. The cylinders, 40 cm in diameter, are divided into five sealed compartments. Inflatable keel. The five-section laminated flooring is reinforced with stringers. The cans are attached using the lyktros-likpaz system. Dimensions 375/145cm. Weight 44.5 kg. Load capacity 500 kg. Refers to four-seater, medium-sized motor-rowing vessels.

Admiral AM-320 Classic

Manufacturer “Admiral Boat” has released a new model with the Classic index. This is a further modification of the Sport series boats and models AM-290, AM-305. Main changes:

The cockpit has become larger;
Payol is tougher;
New design stringers;
New design and larger keelson size;
Improved transom;
The bow of the boat became higher and the curve became steeper.

Technical characteristics of the Admiral AM-320 Classic: weight 42.5 kg, dimensions 320/145 cm, load capacity 450 kg, recommended engine power - up to 10 hp.

Badger Fishing Line 390W

The Korean company Badger is well known to many domestic users of inflatable motor-rowing vessels. Behind long years existence, such series as: Sport Line, Fishing Line, Reed Line, Wave Line, Hunting Line, Duck Line, Fast Cat and Heavy Duty were developed and brought to European standards. For production, PVC with a thickness of 1.1 mm and a density of 800-1300 g/m2 is used.

The hallmark of Badger boats is a drain valve made in the form of a flap (can be used without stopping movement), a Twin Keel type keel and protection of the lower part of the cylinders with an additional layer of fabric. In addition to a rigid floor reinforced with stringers, the boats are equipped with an inflatable floor.

Main characteristics of the Badger Fishing Line 390 W model: dimensions 390/153 cm. PVC fabric density 1100 g/m2. Stationary transom 25 mm thick. Load capacity and capacity 560kg/5 persons. The cans are secured with the lyktros/lykpaz system.

spinbait.ru

Boat Master Company

The main activity of the company, founded in 1993, is related to the development and manufacture of inflatable PVC boats. Small boats produced under the Boat Master brand are made from high-quality materials and components. The Taimen and Riviera models have gained recognition among fishermen and hunters due to their excellent technical specifications. They have a large carrying capacity, excellent maneuverability on water, have an increased cylinder diameter and are distinguished by a high level of reliability.

"Mnev and K"

"Mnev and K" is one of the largest manufacturers of inflatable boats from St. Petersburg. The company's lineup is strikingly diverse - six series, which include several dozen different models. Among them, VPH boats with NDND occupy a special place. They are made from PVC fabric, which is produced in Germany and South Korea.

Company "AquaMaster"

It is one of the leading manufacturers of inflatable boats various types. The production base of the enterprise is located in Ufa, Republic of Bashkortostan. Products of this brand attract consumers with their simplicity of design, light weight and affordable price. Boats produced by AquaMaster have three lines: Aqua, Aqua-Master and Aqua-Optima.

LLC "PARUS"

This company is a designer and manufacturer of inflatable boats. Its production facilities are located in Ufa. The watercraft of this brand are famous for their reliability, simplicity of design and ease of operation and storage, and are popular among people who prefer active recreation on the water. For the manufacture of boats, high-strength PVC-reinforced fabrics from foreign manufacturers are used. The company is known not only in Russia, but also abroad.

"Musson" company

Under the brand of the same name, this manufacturing enterprise produces various models of inflatable boats. The company has gained a good reputation in the small boat market, and is distinguished by its stability and constant expansion of its product range. Inflatable boats "Monsoon" are high-tech products that are produced using modern equipment. Reduced production costs allow us to set friendly prices. For production, PVC fabric is used, which has unique characteristics, which makes it possible to operate watercraft in conditions of low temperatures.

Alpha Company

This manufacturer from Ufa specializes in the production of inflatable boats under the same name. For their manufacture, high-quality PVC fabric is used, which has increased strength. Inflatable boats "Alpha" are the lightest among representatives of their class. They are equipped with oarlocks for installing rotary oars and handles for carrying. The watercraft is packed in one case, which greatly simplifies its storage and carrying.

UfaBriz company

This young company from Ufa has proven itself in the field of production of PVC inflatable boats. For their manufacture, special reinforced PVC fabric from foreign manufacturers is used. It has unique performance characteristics, which expands the possibilities of using boats. The UfaBriz company produces lightweight watercraft that are easy to assemble and easy to transport and store. Optimization of production processes allows the company to set affordable prices for its products.