How to turn a summer tent into a winter one. Making a tent for winter fishing with your own hands. Fig.3 Fastening parts for a homemade tent

DIY winter fishing tent. How to make a tent with your own hands! A comfortable and spacious tent is one of the most important attributes for winter fishing. You simply cannot do without it. Often, fishermen have to spend hours in severe frost and wind waiting for a bite. It’s good if there is a tent nearby in which you can periodically warm up. But what about those who cannot purchase it? After all, this pleasure is not cheap. Today we will tell you how to make a tent with your own hands. This process does not require special skills or knowledge. Types of winter fishing tents First, you must decide on a suitable design. Let's list the main types of tents: Umbrella. For the manufacture of the frame, duralumin rods or tubes are used. The finished structure has rigidity and increased strength. Any synthetic fabric is suitable as an awning. They are often used in combination with tarpaulins. Automatic tent. This option is not as common as the previous one. A distinctive feature of the design is that the tent is sewn to an elastic frame and then folded into a circle. Frame on arches. This model consists of 2-3 arcs made of fiberglass or duralumin. The structure quickly unfolds in place. An awning is pulled over it. What shape can a tent for winter fishing have? Cube, triangle, trapezoid and so on. The choice is yours. What requirements should a homemade tent for winter fishing meet? First things first. The main function of a tent is to protect a person from adverse weather conditions (wet snow, strong wind). It also increases the comfort of fishing. While under the tent, you can prepare food and tea, as well as warm up using special heating devices. Of course, there are a variety of winter fishing tents on sale. The photos attached to this article prove to us that homemade designs turn out no worse than store-bought ones. So, let's get down to business. What you should pay attention to Special attention when sewing such an important attribute? A do-it-yourself winter fishing tent must meet the following requirements: 1. Have a lightweight, compact and mobile design. This is understandable. Some fishermen would prefer to freeze for a few hours rather than carry an extra load. 2. Quick to unfold and easy to install. 3. It is advisable that a do-it-yourself winter fishing tent be made of thick tarpaulin or waterproof fabric. 4. A truly durable frame is made from aluminum and composite materials. But it is not recommended to use plastic. 5. The inside of the tent should remain warm. It would be nice to achieve this without heating devices (portable, gas and others). But this is a utopia... What materials and tools will you need? A DIY winter fishing tent is an excellent solution that will allow you to save a lot of money. We propose to assemble a fairly simple design. We are talking about a tent based on a standard box, which can be purchased at a fishing store. We will also need: one pair each of children's (very small) and school skis (up to 160 cm long); several duralumin tubes (you can remove them from ski poles); old cot; waterproof fabric (will be used as an awning). Do-it-yourself winter fishing tent: instructions All necessary materials and the tools are prepared. Now you can move on to the practical part: 1. Take aluminum ski poles. From these we will make vertical frame tubes. As for the horizontal tubes, they should be a little thinner. The upper connections of the ribs of the future tent are made in the form of tees that end in cylinders (length 5 cm). It is very important that the diameter of the cylinders is the same as that of the tubes being connected. 2. We begin to secure the lower ends of the vertical tubes to the skis. The main role here is played by the shaped lock. At the lower end of the tube we find a T-shaped tongue, and then carefully insert it into the metal plate attached to the ski. All that remains is to rotate the tube 90 degrees. 3. To connect the tent frame with the box, we use 2 duralumin tubes from an old folding bed bent at the ends. The end of the connecting product must be secured to the end of the bent tube. At its other end we install a latch, which, during docking, with its tongue will fall exactly into the hole on the second bent tube. 4. The box will be connected to the above mentioned tubes using round lugs located on the ski racks. They can be made from copper or steel strip and then attached to the posts. 5. Now you need to pull the awning. We install metal plates with slots on the lower edge of the material. It is through these slots that the U-shaped brackets driven into the side ends of the skis will pass. We fix the connections using shoe laces. In order for the tent to hold well on ice, you need to equip it with anchors (2 pieces). Each such anchor is a penknife with two blades at the ends. Assembling the tent on site Make winter tent- only half the battle. It must be assembled and installed correctly. The algorithm of actions is as follows: 1. We connect the halves of the bent tubes with the skis. The tongues should fit into the slots of the plates. The tubes are located along the axis of the skis and then rotated 90 degrees. 2. We thread the ends of each pair of tubes through the eyes on the ski racks. 3. Connect all 4 skis. The locking tab of the bent tubes should snap into place. 4. Let's start installing the box. 5. We install 4 vertical posts at the ends of the skis. 6. Now you need to install tees on the ends of the tubes, and then connect them to the roof tubes. 7. Align the holes of the tubes and tees. The installation wires will pass through them. 8. We stretch the awning onto the frame. We thread carabiners and plates through the brackets and tongues on the skis. We fix the connections with laces. 9. At the end of the process, we attach anchors and install them in pre-prepared holes. Conclusion Now you know how to make a tent with your own hands, what materials and tools are required for this. By following the recommendations and instructions described above, you can create a stable and reliable structure.

Fishermen have to spend many hours in the cold and strong winds waiting for a bite. Therefore, to protect against adverse weather conditions, an ice fishing tent is necessary. Making it with your own hands at home is not difficult. Using a shelter will significantly increase the period a fisherman spends on the ice. Thanks to the use of heating devices, the air under the awning can heat up to 20 degrees.

Types of tents

There is a wide variety of options for homemade winter tents that are used both in summer and winter period. The choice of design depends on the method of ice fishing.

For stationary fishing, a frame structure is installed in one place. Lightweight mobile models that can be quickly assembled are mainly used for walking fishing.

According to its design and assembly methods tents are divided into the following types:

DIY making

Making and assembling a tent for a fisherman includes several important steps.

Frame installation

A rigid collapsible frame is assembled from several main and additional side supports, for which aluminum ski poles, metal or plastic tubes are suitable. The parts are connected using three-way and corner hinges and special tubes. The frame can be installed on a sled made from skis and other available materials using special tube fasteners.

Creation and fastening of an awning

To make an awning, the product drawing is carefully calculated in accordance with the required dimensions. The finished pattern is cut from water-repellent fabric with a two-centimeter seam allowance. The attachment points for installing the dome are secured with grommets, and they are reinforced with reinforced tape on the plastic film.

To secure the structure, screws are most often used. For a do-it-yourself winter tent, such fastenings are made from a metal rod and self-tapping screws. A piece of rod is welded to a long self-tapping screw in the form of a handle. To make it more convenient to handle screwdrivers in the cold, rubber or silicone tubes are placed on the rod.

Threaded hooks, pegs, etc. can also be used as fastening elements.

Making the floor

To make fishing in comfortable conditions, you can make a floor. Isolon (polyethylene foam), a sheet insulation material with high thermal insulation properties, is well suited for these purposes.

A piece of appropriate size is cut out of a sheet of insulation and holes for holes are made in it. Such flooring perfectly retains heat inside the shelter. The ice underneath does not melt even when using the oven.

Alternative options

If a fisherman often changes fishing spots, it makes sense to consider the most lightweight and mobile tent options.

Cape tent

This is the simplest version of a fishing tent, which can be made at home from thick polyethylene film. An isosceles triangle is cut out of polyethylene, and a zipper is sewn along the edge of the film. To support the tent dome, use an ice ax, which is extended to the appropriate length. To attach the film to the ice, holes are made along its perimeter through which pins or screws are driven into the ice.

The disadvantage of the cape is that there is quite a bit of space left inside, so the fisherman is in cramped conditions. Polyethylene film is not a very durable material.

However, thanks to its transparent structure, there is a good view while fishing. The tent is easy to transport as it is quite compact and light in weight.

Dome tent

Instead of an ice ax, a metal pole with a pointed end is used as a central support. The support can be made collapsible from several metal tubes, which makes transporting the tent easier. The pole is driven into the ice and a film or awning made of denser material is pulled from it. The canopy of a folding house is reinforced with pins or guy ropes. This design is more reliable and can also be mounted and installed fairly quickly.

Tent requirements:

the design should be light in weight and mobile;
can be quickly assembled and installed;
It is advisable to sew the fabric for the awning from tarpaulin or other moisture-resistant material;
For the frame it is recommended to use products made of aluminum or composite materials.

In addition, the tent must have good ventilation and thermal insulation to protect the fisherman from adverse weather conditions, as well as retain heat for a long time. Ideally, it is possible to provide the possibility of placing heating devices in it.

Attention, TODAY only!

Tent for winter fishing can buy. They are different: large, small, medium; quite cheap and quite expensive. In any case, you can choose according to your budget and needs, buy it and not bother - that’s my opinion. But, there are people with obvious “creative incontinence” and too even hands, growing from exactly that place. Here, this article is for them - how to make your own tent for winter fishing.

So, why is it needed? For protection from wind and snowfall. Let's consider several options for making your own tent for fishing in winter. As usual, there is a simple way and a more complex, thorough one, and also a very thorough and very labor-intensive one. I will briefly describe all three.

. Well, this is the most conventional and easiest to make shelter from the snow and, to some extent, from the wind.

It's not even a tent, but rather a cape. Our task is to make a dome from thick polyethylene film. The support of the tent will be an ice screw. To do this, extend the drill to the maximum and screw it into the ice at an angle, as can be seen from the figure. Polyethylene can be cut in the form of an isosceles right triangle, so that when folded in half, you naturally get a rectangular isosceles triangle. If you forgot geometry or didn’t understand anything, here is the diagram.

Accordingly, we sew on a zipper that can be used to close it. We make holes in the grommets along the perimeter of the bell. Through these holes we will attach the cape to the ice using steel pins or nails.

Tent dome made of polyethylene - not The best decision, in terms of strength. It is quite difficult to sew a zipper well without tearing the film. But, on the other hand, the film is transparent and everything around is visible. So, you can make a dome from fabric (light, translucent or denser). You can make a dome using a more advanced pattern. This is already a transition to a more complex winter tent design. Here, an ice screw won’t work as a support. At a minimum, you need a central support, higher. It can be made foldable by holding the sections together with tubes, like the old bamboo fishing rods. One end is sharp to pierce the ice. We pull the canopy onto such a central support and tighten the edges by driving pins into the ice through the holes (or using guy ropes sewn to the tent canopy).

Even more complex structures, as in the figure, require more than one support. In addition to the central one, 4 or more auxiliary supports are required on the sides. This way you can make a fairly large tent. Of course, the larger the tent, the more folding poles, the heavier and bulkier the tent will be when folded...

And, the most outdated, time-consuming and complex option make a tent for winter fishing– make a collapsible rigid frame from aluminum tubes. And a dome made of thin fabric is pulled over the assembled frame. There are many design options! I think if you have reached the point in life where you want to make this kind of tent yourself, then you will design it, construct it yourself to make it even more interesting

I repeat. Personally, I think that with the current abundance of winter tents on sale, and their moderate cost, doing it yourself is a dubious idea. But perhaps there are fans of various homemade products and they will decide make a tent for winter fishing with your own hands. I hope these brave people will find some useful ideas in the proposed material.

Winter fishing is a lot of positive emotions, which can be diluted by some of the negative emotions associated with weather conditions. It is not difficult to imagine the discomfort an angler feels in the presence of frost, and even wind, which increases the feeling of cold. The wind may not be strong, but it can bring a lot of problems. If you have a winter tent for fishing, then some of the problems can be reduced to zero.

The presence of a tent allows you to increase the total time a fisherman spends on a pond. winter time. Moreover, you can easily raise the temperature in the tent to above zero, which will allow the fisherman to feel very comfortable.

Types of tents for ice fishing

Depending on the design features, winter tents are divided into specific models.

These are the simplest designs that are easy to assemble and install. To make the frame of such a tent, you should use durable but lightweight materials. Synthetic fabrics or their combinations with tarpaulin are more suitable as an awning for covering.

The design is designed in such a way that the frame acts as a spring, which takes the desired shape when it is released from the packaging. They are quite popular due to their simplicity of design and lightness. Despite this, these tents have a number of disadvantages. Firstly, they are not resistant to strong winds, and secondly, they are not so easy to fold. Therefore, when going fishing, you will have to practice beforehand. It unfolds itself, but without the skills, it will be very difficult to fold it and if you overdo it, you can break it.

This tent consists of several folding poles and an awning that covers this frame. We can safely say that this is the same simple option, but it takes a long time to assemble and disassemble. In addition, it is not particularly durable. Therefore, fishermen rarely purchase such a design.

A tent for winter fishing should protect the fisherman from wind, frost and precipitation. Moreover, the tent should have enough space to relax so that you can cook lunch or just drink tea to keep warm.

You can purchase any tent at specialized retail outlets, especially since the assortment is very large. Be that as it may, some fishermen make them themselves, taking into account all the requirements. Besides, who else but the fishermen knows what kind of tent is needed. Moreover, not all factory-made models meet the requirements of winter fishing enthusiasts.

A homemade tent should be:

quite light and compact;
mobile so that you can move easily;
covered with dense but breathable fabric;
easy to install and dismantle;
durable and strong, and also retain heat for a long time.

To work you will have to stock up on these tools

Most tents made by anglers themselves fit into fishing box. By the way, you can also make a box yourself, which is what many fishermen do, although you can buy it. In addition to the box, you will need the following accessories:

two pairs of skis, one for children, one for school;
tubes. In this case, it could be ski poles;
unnecessary folding bed;
dense fabric, such as tarpaulin.

At first glance, how can you build a tent from such a set of elements? But, nevertheless, such a design proved that it has the right to life. The final product fits into a fishing box, which is very easy to transport on ice. The structure is quickly and easily assembled and just as easily moved on ice in working condition.

The only negative is that there is little space in it. But if you approach the problem constructively, then it is possible to solve it and increase the size of the tent. Paradoxically, it protects from the cold, and this is the main thing.

Judging by the drawings, the tent is mounted on skis, which simplifies its installation on ice. Regular tents require special fasteners. In addition, skis allow you to move the entire structure around the pond countless times. As a rule, winter fishing is not limited to one punched hole - there can be ten, or even more, and each hole has to be fished.

The only thing is that it is problematic to use it in the presence of strong wind, since it is mounted on skis, the wind will be able to move it across the pond on its own. In this case, you can get used to it and use the power of the wind to move it. The main thing is to drill the holes correctly.

Despite the fact that this design was born a long time ago, many anglers have tested it in harsh winter conditions.

How to make a tent with your own hands

Ski poles act as a frame and are installed vertically. Horizontal tubes should be thinner. At the corners, the frame is connected using tees, the diameter of which must match the diameter of both vertical and horizontal tubes.
The next step is to attach the vertical tubes to the skis. A metal plate is attached to the ski, into which a tongue is inserted in the letter T, attached to the lower end of the tube. To secure the stick, just rotate it at an angle of 90 degrees.
Two sticks are prepared from an old cot that will connect the frame to the box. Take a bent tube, at the end of which there is a docking unit. At the other end of the tube there is a latch, which serves as a fastening element for the docking unit.
A spring is made from a copper strip that connects the box to the tubes.
Finally, all that remains is to pull up the awning. Metal strips with holes are attached to the lower part of the awning. The brackets attached to the ends of the skis are pulled into these holes. The awning is connected to the brackets using ropes. For stable behavior of the tent on ice, it is equipped with two anchors.

How to make fasteners

If the tent is not secured on the ice, then at the slightest movement it will shift in any direction, especially in the presence of wind. Therefore, you need to make special pegs with threads at the end. For this purpose, long and strong self-tapping screws are suitable, the top of which is bent in the form of a hook. By the way, hardware stores sell hooks with threads of any size.

How to sew a tent with your own hands

Alternatively, you can make a tent in the form of a house. To make it you need to take:

Water-repellent fabric with an area of 14 square meters. meters.
Metal washers, 1.5 mm in diameter, 20 pcs.
Braided rope, up to 15 m long.
Narrow ribbon, about 9 m long.
Fabric for bedding, rubberized within 6 m.

Such a tent can accommodate one or even two people. First of all, you need to prepare two pieces of fabric measuring 1.8 x 0.9 m. Marks are made on the 1.8 m side every 65 centimeters. The same is done with the other (0.9 m) side. The fabric should be cut at the joining points to create the entrance and back wall of the tent.

The diagram shows the implementation of further work step by step. Most importantly, all parts must be sewn securely. Use tape to reinforce the seams. There are times when a tent is made from ordinary fabric. In case of bad weather, polyethylene film is used, which can protect against wind and precipitation. Metal rings are sewn into the fabric for fastening. As a rule, they are located at the bottom of the awning, as well as in the places where the fabric is attached to the frame.

Setting up a tent on a pond

Assembly homemade tent skiing takes a minimum of useful time:

The skis on which the tongues are attached are connected to the halves of the tubes located parallel to the skis. They should be pointing inside the tent.
Each pair of bent tubes is threaded through special holes located on the ski racks.
The skis are connected to each other to form a rectangle.
A fishing box is installed on the structure prepared in this way.
Vertical posts are installed at the ends of each ski. There should be four of them.
Tees are taken and with the help of them a roof is formed. They are installed on each vertical post.
Using horizontal tubes, the frame is finally formed.
A fabric is thrown over the frame, which is attached to the frame using short ropes.

A similar tent is disassembled in the reverse order. If each structural element is numbered, then the process of assembly and disassembly will take slightly less precious time.

Naturally, a tent can be purchased in a store, but not every winter fishing enthusiast is ready to purchase one, due to the lack of extra funds. It is much cheaper and easier to make it yourself.

Do-it-yourself water jet for a boat

How to make a hinged transom for a PVC boat?…

Homemade fishing rod stand

DIY nod for a winter fishing rod

DIY winter lures for perch

Do-it-yourself snowmobile for fishing

Self-cutting winter fishing rod with your own hands...

DIY fishing boat

Making a spinner with your own hands

Tents for winter fishing

Just some twenty years ago, a factory tent for winter fishing was a rarity in our country. On the ice you could often find homemade tents of a wide variety of designs. Most simple options They were a large plastic bag, one edge of which was attached to the handle of a drill screwed into the ice, and the other was supported by the fisherman himself with his shoulders and head. The lower edge of the tent bag was pressed against the ice by a box on which the fisherman sat. Fishing in such a tent was sheer torture, so many fishermen, especially fishermen, sewed reliable and spacious tents of original designs. In addition, drawings and diagrams of winter tents were periodically published in the “Homemade” section of the “Rybolov” magazine.

Today, probably, few people sew their own tents. At least, they are almost never found in reservoirs. After all, it is much easier (and, perhaps, cheaper) to buy a ready-made tent. The stores offer a wide variety of options - for every taste and budget.

Chinese spring tents or, as they are called, “machine guns”

The simplest and most budget option are Chinese spring tents or, as they are called, “automatic tents”. They are sold under the brands “Condor”, “Siwedia”, etc. Price -600-1500 rubles. - depends on the size, presence of a bottom and thickness of the material. The awning of such a tent is attached to a frame made of spring wire, which is folded into a figure eight. The advantage of such tents is their compactness - in assembled form A one-person tent in a cover is a flat pancake with a diameter of 50 cm, a thickness of 5 cm and a weight of 2 kg. The tent unfolds on the ice itself - just take it out of the cover.

However, these tents also have their drawbacks - they are unstable in the wind, and additional fasteners are not included in the tent package. Tents of this type are usually sprinkled with snow around the perimeter, but this is done more for insulation. Snow will not help hold up a tent in a strong wind. For reliable fastening, you need to separately purchase special “screws” that are screwed into the ice. The simplest gimlets, made from self-tapping screws and resembling a bottle corkscrew, are sold at a price of 100 rubles for 4 pieces. A set of real, “alpine” gates will cost you more than the tent itself. Spring type tents come with or without a bottom. A tent with a bottom that fastens with a zipper is preferable, since it does not need to be covered with snow around the perimeter, and the fisherman, pressing down the bottom own weight, makes the tent more stable in the wind.

Cheap Chinese tents very often require modifications - strengthening the hinges, sometimes replacing the zippers. Such tents are usually made from thin polyester, which protects well from wind and wet snow, but does not “breathe” at all. Ventilation of the tent is carried out through a window and a slightly open “door”. There are also two- and even three-layer spring tents. They cost more accordingly. It seems like no one succeeds in assembling this type of tent the first time. Therefore, after purchasing, it makes sense to practice at home. The sequence of actions when assembling a tent is usually depicted in a diagram included in the pocket of the cover bag. After several fishing trips, you will learn how to fold an automatic tent in a figure eight shape and put it away in a cover in a few seconds.

Another common type of tent for ice fishing is the umbrella tent.

They are produced not only abroad, but also in Russia, under the brands “Nadezhda”, “Malek”, “Nelma”, etc. Tents of this type have a rigid frame, usually made of durable duralumin, which opens like an umbrella. Such tents are more reliable and stable. There are 2, 4 and 6-beam designs. The latter, of course, are the most stable. In the production of these tents, mainly materials of higher quality and strength are used than for spring-type tents.

If the name of the tent contains the index “D” (for example, “Stack-Al D”), then this indicates that the upper part of the tent is made of “breathable” fabric. In such tents, condensation practically does not form in frosty weather. In addition, you can use heaters without fear of burning. However, given that ordinary tarpaulin is most often used as a “breathable” fabric, in wet weather the roof of such a tent begins to let in moisture, which drips directly onto the fisherman. Tents of this type are also disassembled and assembled quite quickly. When folded, they are not as compact as machine guns and are a cylindrical cover 1.2 m long. The weight of a single tent is about 3 kg. The cost of umbrella tents is from 3 to 6 thousand rubles.

Tents from Western manufacturers - “Maverick”, “Rapala”, “AVIREX”

In the market itself wide range“branded” tents from Western manufacturers are also presented today - “Maverick”, “Rapala”, “AVIREX”, etc. These tents are distinguished by high quality tent materials, durable poles made of composite materials, reliable fasteners and fastenings, a well-thought-out ventilation system through special membranes and maximum ease of assembly, disassembly and operation. Of course, their price is 2-3 times higher. Also, we should not forget that serious tents have a very decent weight. For example, the luxurious three-seater “Rapala Pop-up Tent 3-Man” (costing from 15 thousand rubles), the developers of which, it seems, took into account absolutely all the nuances of winter fishing, has a weight of 10.4 kg. As for the capacity of the tent, here you need to follow the “-1” rule. Those. If the tent is “double”, then in practice one angler can comfortably accommodate and fish in it. If “three-seater” - then two.

Some fishermen use universal “winter-summer” type tents in winter, or summer tents in general; however, the presence of an additional awning and canopy in winter only creates additional inconvenience and increases disassembly and assembly time. A number of anglers prefer professional alpine tents. Considering the high (from $1 thousand) cost of the latter, this is hardly advisable. However, the choice always remains with the buyer.

The frame of a homemade winter tent is made with your own hands from old aluminum ski poles with a diameter of 16 millimeters, which are cut into 10 pieces 500 millimeters long. In addition, four tubes with an outer diameter of 13 millimeters and two plastic rods or beech sticks (you can use poles from children's skis) with an outer diameter of 10 millimeters were needed. For connection, corner and three-way hinges, rivets and hooks from an old folding bed are used.

Fig. 1 Frame of a homemade winter tent:

1 - beech stand; 2 - ball stoppers; 3 - beech rod; 4 - grooves for the locking ball;

5 - cap strips (red arrows indicate the directions of hinges and telescopic connections).

The rivets are shortened, the hinges are reduced in size, and new holes are drilled into them, taking into account the diameter of the tubes.

Places are marked for drilling holes with a diameter of 5.5 millimeters in such a way as to obtain the desired angle of divergence of the poles when installing the tent (at point-blank range). This is the main condition for all hinge joints.

The side racks must be secured with cap bars in the working position so that the deflection angle is slightly greater than 90°.

A fairly simple method of locking telescopic connections is used: in the place where the extendable tubes are locked, we drill a hole with a diameter of 5-5.5 millimeters with a chamfer for a socket, into which we insert a ball with a diameter of 6 millimeters. We install the ball into the socket and slide a piece of rubber hose with an internal diameter of 13-14 millimeters. The ball is first coated with lubricant.

Circular recesses are made in the beech rod on both sides - grooves for the locking ball.

Fig.3 Fastening parts for a homemade tent:

1 - adjustment of hinges; 2 - ball stopper; 3 - fastening the vertical rear pillar

Making a homemade tent frame begins with a vertical rear post. The lower side tubes (opening angle 90°) are attached to the three-way hinge, then the side posts, and lastly the lower support tubes are assembled.

Ball stoppers (10 pieces) are assembled during the manufacture of the frame. The length of all racks is determined at the end of assembly, but the lower tubes should not extend beyond 500 millimeters. The front post is assembled in exactly the same way, only the hole for the hook axis is made before attaching the side tubes. The opening angle of the side beams of the front pillar is determined after manufacturing the rear pillar.

Fig.4 Frame of a homemade winter tent, made with your own hands, with an awning:

1 - tension cords; 2 - zipper locks; 3 - part of the sewn bottom of the tent; 4 - loops and ribbons for attaching the awning to the frame; 5 - apron; 6 - pocket.

When the frame of the homemade tent is ready, we begin to make the tent awning, for which we use old raincoats made of Bologna fabric, which does not harden or rot in the cold.

We sew part of the bottom (250-300 millimeters) to the tent, as well as loops and straps for attaching the frame. Cuts are made on the sides and zippers of at least 500 millimeters in length are sewn in. An apron 200-300 millimeters wide is sewn along the bottom of the tent to the bottom, and pockets are sewn onto the inner side wall.

You can make a small cut with a zipper (200-250 millimeters) for the window. Caps made of thick fabric are sewn into the corners of the tent canvas, into which the frame posts are inserted. The cords are stretched from the side posts to the front, we pass them through the loops and put them on the front post over the cap, top part which we do not sew in this place.

The weight of the tent is 1.8 kilograms, the assembled dimensions are 200 x 500 millimeters.

Setting up the tent takes no more than one minute. Standing against the wind, facing the rear pole, we unfold the tent and put it on ourselves, straighten the hinges, pull out the telescopic connections, and secure the side poles with cap strips. We close the zippers and put on the tension cords. To leave the tent, open the locks on the sides, lower the front pole (the tension cords will fall on their own and hang in the loops), tilt it towards you and tilt the front edge of the tent over your head.

Fig.5 Parts and assembled tent:

1 - assembled front pillar; 2 - assembled rear pillar; 3 - assembled tent

If you sew two “zippers” 1000-1200 millimeters long - one parallel to the bottom, the other perpendicular to it, you can leave the tent without lowering the front post - just open these two locks. A tent for winter fishing for two should be equipped with two rear frames, the lower connections will be longer.

The light weight and dimensions allow you to put the tent in a backpack.