How to properly tie a hook to a pike line. Not everything that is tied unravels, or the best ways to attach a hook to a fishing line. Fishing knot "Stupid hook"

It would seem that every fisherman knows how to tie a hook to a fishing line, but still this topic is important and the Internet is replete with requests on this topic. This is explained by the fact that many beginners come to fishing, other fishermen are switching to mastering braided cords, where they use their own specific knots, and some simply want to broaden their horizons.

One way or another, we decided to touch on this topic and talk about the most popular types knots for knitting fish hooks. Let's build today's story simply: we'll divide the entire text into parts, each of which will be devoted to only one method. Let us warn you right away that the nodes are named as in English terminology, you may know them under completely different names.

Bloody

Despite the ominous name, this hook knot is one of the simplest and most common among anglers. It is used in those connections where special strength is not required, since the strength of the fishing line on it is reduced to 70 percent.

Bloody is used only for monofilament fishing line; it is not used for tying braided line.

Based on this simple way Several other related knots are based on knitting, so studying this method will provide an opportunity to understand the technique of more complex designs. In addition to the hook, they can also use a spoon, a sinker, and a swivel, and it is so named because in this way a knot was made at the end of the rope, which was used to punish English sailors for their offenses.

The technique for tying a blood knot is as follows:

1. We thread the tip of the fishing line into the ring.
2. We wrap it around the base three to seven times.
3. We thread it through the loop at the ear.
4. Tighten by the short end.

Bloody locked

This modification of the previous node increases its strength to 80 percent. It is named so because the tip is pressed with a fishing line, clamping it into a kind of lock. It must be said that this unit is also very versatile, and it can be used on thick monofilaments up to a diameter of 0.6 millimeters.

Here's how to properly tie a hook with this knot:

1. We repeat the first three steps, as in simple Bloody.
2. After threading the tip of the monofilament thread into the loop near the eyelet, we insert it from top to bottom into the newly formed loop and after that tighten it.

Bloody tucked

The difference from the previous bloody brother of this modification is that in the last action the tip of the fishing line is passed from the bottom up from the hook, as if tucking a loop. This makes it possible to use it on monofilament lines up to 0.2 millimeters.

Clinch

Another variant of the Bloody Knot. It is used for fishing with thin and medium monofilament. Here's how to bind it correctly:

1. We pass the tip of the line through the eye of the hook twice.
2. The rest of the actions are the same as in simple Bloody.

Palomar

Many fishermen consider this particular tying scheme to be the best. In fact, having completed Palomar once, your hands will forever remember the technique of knitting it. The strength of the knot reaches 80 percent, and it is used exclusively on simple nylon fishing lines of small and medium thickness.

Palomar is knitted like this:

1. The fishing line is folded in half and inserted into the eye of the hook.
2. We wrap the resulting loop around the main cord.
3. We put a loop on the hook.
4. Holding the hook with one hand, with the other we tighten both the main line and its end at the same time.
5. Trim off the excess.

There is a triple Palomar, but it is used to tie braided line to spoons or other lures.

Due to the triple passage into the ring, it is not used for hooks.

Snood

This very popular fishing knot is truly versatile. It can be used to tie a hook with an eye or with a spatula, and it is used both on monofilament and on braids. Its strength reaches 95 percent.

Many fishermen use snood; some do not even know its name, which is translated from English as “hair net.” It fits like this:

1. You need to take the hook with the curve up in your left hand.
2. Form a loop from the fishing line and attach it to the fore-end so that the tip points towards the sting. Moreover, if the hook has a bent ring, you can first thread the tip into it.
3. Holding the edge of the loop near the ring or spatula with one hand, wrap the forearm with turns with the other hand until the beginning of the bend, then throw the loop over the hook.
4. Tighten the knot at the long end of the fishing line, holding the hook.

Sliding Snood

This knot is knitted in the same way as a regular Snood with the difference that it is used for tying not to the end of the fishing line, but in an arbitrary place. It can be tied to both braid and monofilament; it does not reduce their strength, since additional fishing line is used to attach it.

You can securely tie a hook to a cord without a leash in the following order:

1. We repeat the first two points from the previous description, only we do everything on an additional piece of cord.
2. We make half the number of revolutions around the forend.
3. We apply working fishing line to the fore-end.
4. We make the second half of the revolutions.
5. We tighten the additional fishing line and cut off its tails.

Leash

This knot is quite strong and versatile for tying hooks with an eye or spatula with thin braids and monofilaments; the strength of the Leash reaches 95 percent.

The order of tying it is as follows:

1. We make a loop from the vein.
2. Holding it at the eye of the hook, we begin to wrap the tip of the shank inside the loop.
3. You need to make 10-15 turns depending on the thickness of the cord.
4. Finally, you need to tighten both ends and cut off the tail.

Stupid leash

Most fishermen use this knot without even knowing that it has that name. It is used on braided and monofilament lines up to 0.3 millimeters thick.

It is similar to a simple Leash, only the winding is carried out not inside the loop, but outside. At the end, you need to slip the tip of the cord between the forend and the winding and tighten it.

Loopy

This popular and reliable way to attach a hook is a little similar to the previous knots, but a little weaker in strength.

Used for models with a spatula or a ring, it knits quite quickly:

1. Fold the end of the fishing line in half, for a hook with a ring, first thread the tip into it.
2. Place the loop along the hook with the loop facing the hook.
3. Holding the loop at the hook with the fingers of your left hand, we wrap the free ends around the forearm with your right hand at least six times.
4. Finally, we insert the end into the loop.
5. After wetting the knot, tighten it by the main cord.

It is worth paying attention to the nuances that must be taken into account when tying this knot:

• when tying a model without an eye, the main cord should be in tension for convenience, so the reel with fishing line can be pressed down with something heavy;
• in such knots the number of turns plays a role; the more, the stronger.

The simplest of knots

At the very end, we invite you to familiarize yourself with the technique of knitting the simplest of knots for hooks with a spatula. It is quite strong and reliable and can be used for both monofilament and braided fishing line.

The limitations when using such a mount are as follows:

• not suitable for lines over 0.20 millimeters, however, where such thick leads are needed;
• a hook with a miniature spatula can slip under strong tension.

Knitting technique:

1. At the end of the cord we form a loop with a double overlap, like a surgical one.
2. Fold the resulting loop into a figure eight.
3. We thread the forend through both halves of the figure eight.
4. We wet the vein and tighten the knot, cutting off the tail.

All fishermen know that if not all fishing success, then certainly a significant part of it, depends on a hook correctly tied to the fishing line.

The type of knot is selected taking into account the type of fishing line used (monofilament or braid) as well as the thickness of the hook eye. Each fisherman chooses the optimal combination for you details fishing gear. The same node can behave completely differently. It depends equally on the fishing line and the hook. On one line and hook the knot is reliable, but on others it is the reason for the loss of the hook or the escape of a pecked fish.

Advice regarding the choice of node can only be advisory in nature.

Palomar Knot

In first place, of course, is the famous Palomar. It is most often recommended by fishing line manufacturers. Knot strength 80% (tensile). It has proven itself in use with thin and medium fishing line. In addition to the hook, this knot can also be used to tie a spinner. Learning to tie it is quite easy. Beginners rarely make mistakes. The disadvantage of this node is that it not suitable for thick fishing line and traditional braids (the knot cannot be tightened due to the rough surface).

Execution technique:

• the edge of the fishing line folded in half is threaded through the eye;
• then it is looped around the main line above the hook - a regular knot is performed;
• the resulting loop is thrown onto the fore-end, the knot is tightened, and the excess end of the fishing line is cut off.

Bloody Knot

Bloody can be considered somewhat universal. He fits for hooks and lures, as well as for attaching the sinker. Strength 70%. Works well with both thin and thick fishing line. Based on this fastening, several options for tying knots have been developed. The disadvantage is that it cannot be used with braided wire.

Technique for performing the “Bloody” knot

• the edge of the fishing line is passed through the eye;
• then the hook rotates around its axis until several turns are formed around the main line;
• the same short end is pulled into the loop formed near the eye;
• the knot is tightened and the excess is cut off.

Snood node

Sood is intended for fastening knots with a spatula. This method came to us from ancient times, when hooks with eyes were not yet produced. Strength 95% (tensile). Good for monofilament and braid. The line should be thin or medium. The knot is not suitable for thick fishing line and for attaching other fishing parts.

Technique:

• the hook is clamped in the fingers, a loop is drawn around it in the air with the edge of the fishing line (in longitudinal projection);
• With your finger, the loop at the top is pressed against the spatula, Bottom part the loops are screwed below the head;
• the knot is tightened through the long end, the short one (below the hook) is cut off.

The number of turns depends on the thickness of the fishing line. The larger its diameter, the fewer turns. But there should not be less than five of them - the knot will be untied.

In the video tutorial below, an experienced fisherman will tell you the secret of how to tie a hook to a fishing line using his favorite knot.

We are considering attaching a large carp hook to a 0.3 mm thick fishing line using a variation of the Snood knot. Whether there is an eye or a hook with a spatula does not really matter. If there is an eyelet, the fishing line is first passed through it, and then the knot itself is made. Don't forget to wet the line before tightening!

Step knot

With the technique of tying another well-known knot for hooks without eye can be found in the following diagram. It was called stepped. Used on forged hooks with a spatula (more durable than with an eye) for catching large predatory fish.

Technique for performing a step knot

• a fishing line folded in half is inserted under the hook (along its length);
• the short end is used to wrap around the head and fore-end - first the nearest fishing line is wrapped with two turns, then the long part of the fishing line is wound to the hook with three more turns;
• the end on the lower turn is threaded into the resulting loop;
• the knot is tightened and the excess line is cut off.

Advantages of a step unit in its reliability and strength (95% tensile strength). It is also suitable for attaching small eye hooks. But it should not be used on lines that are too thick.

What knots do you most often use for attaching hooks? Please share your favorite ways to tie a fishing line. Insert your text here

Designed for tying a hook, swivel or bait to the main line or leader. And of course for tying cords and lines together. Each fishing knot has its own qualities (characteristics). The first, and most important of them, is strength, the second is simplicity, (speed) of knitting. Their variety is quite large, almost all fishermen use some, and some exist only as schemes, and no one uses them in practice.

Another important point when tying a fishing knot, this is the final tightening. You need to tighten the knot gradually and carefully so that no extra loops are formed. And also by pre-wetting it, it then tightens more tightly and does not burn out the fishing line. Burning the fishing line while tightening the fishing knot happens quite often. If, for example, you did not wet the knot from the fishing line and quickly tightened it, this is a 100% burnout. It happens under physical strength friction, when the line is tightened on the knot, friction is created, and as a result, heating. Therefore, the wetted unit has less friction force, and the moisture seems to cool it. Remember this, tighten fishing knots either wet or slowly, slowly.

Fishing knots, contents:

• For eye hooks, snap hooks, swivels: Clinch, Palomar
• For crocheting with a spatula: Dumhof, Figure Eight
• For connecting fishing lines and braids to each other: Bloody, Albright
• 15 different nodes: video

Fishing knots for hooks and leashes, how to tie a hook with an eye and a blade

Clinch- is the most common knot among fishermen; it is quite simple, but very durable. It is used for tying hooks with an eye, snap hooks, swivels, baits (wobblers, spinners) Well, in general, for everything listed that has an eye.

Knitting pattern - take the free end of the fishing line or cord and thread it through the eye (hook, wobbler). Next, we wrap the fishing line around ourselves 4-5 turns; for thinner mono and cords, the number of wraps should be increased to 10. Thin cords love to “ride” on knots, so a larger number of windings are needed. Then we pass the free end into the loop near the eye, and put it into the second loop. Tighten slowly and the clinch knot is ready.

Palomar- a simple knot for a fishing hook, carabiner or swivel. The only disadvantage of this unit is that it is not always possible to insert two fishing lines into one eye. With carabiners and swivels, of course, there will be no such problem, but with hooks, especially when you use a thicker mono as a leash, it may arise.

The pattern for knitting a palomar knot is to fold the fishing line (leash) in half, and thread the end part into the eye of the hook. Next, we knit an ordinary knot over the eye, but do not tighten it, but throw the loop over the point of the hook. Then we carefully pull it together, and a small, simple knot comes out that holds it very well.

Dumhof knot for spatula hooks- is the most reliable and durable for hooks with a spatula. And most fishermen use it for tying hooks

Knitting pattern for the Dumhof knot - you need to put the fishing line along the fore-end and wrap it back so that a loop is formed. Then you need to wrap 5-8 turns around two folded monos and a forend. But when winding, you need to make sure that the turns lie side by side, and not haphazardly. Then we thread the free end into the loop and tighten it. You need to tighten it harder, otherwise the knot may slip through the blade when landing fish. It is used on monofilament, fluorocarbon, and also on cord.

Figure Eight Knot- also designed for crocheting with a spatula. Quite simple, but slightly inferior in strength to Dumhof.

Figure Eight knitting pattern - take a fishing line and make a loop with a double winding on it. Reduce the loop size to the right size(relative to the hook). Next you need to make a figure eight from this loop. To do this, take the edge with two fingers and turn the loop in opposite directions. All that remains is to thread the hook through two rings and tighten it.

Fishing knots for tying fishing lines and cords

Albright- if you need to tie together monofilament, fluorocarbon, braided PE cords of different diameters. Then the Albright knot will come in handy. Its strength is very high, and it can be used on spinning fishing when you need to tie a fluorocarbon leash to the main fishing line or cord, for example. In carp and feeder fishing, it is useful to tie a shock leader to the main fishing line. It is also useful in fly fishing, hunting, and Everyday life. When you need to connect two pieces of rope together.

Albright knot knitting pattern - first take a thicker monofilament (or cord) and fold it in half. Then we thread more fishing line or a thinner cord into the loop. This sequence must be followed. And we begin to wrap a thin fishing line around a double-folded monofilament of a thicker diameter. We make 10 or more turns, and thread the free end back into the loop. We wet it and tighten it. Sometimes fishermen even glue the knot with glue for greater strength, but you need to know that not every glue is suitable for this.

Which I also call snake, is suitable for connecting fishing lines of the same (or almost) size. That is, we use Albright when we connect monofilaments (cords) of different thicknesses. And Bloody, when you need to tie fishing lines and braided cords of the same thickness.

Step-by-step pattern for knitting a Bloody Knot

The best fishing knots - video playlist

This video shows in great detail the step-by-step knitting of hooks, leashes, fishing lines and cords with each other, a total of 15 types of knots. The site reviewed only the six best that every angler should know. In the comments you can leave your answers, what knots you use, and which knot you think is best suited for tying hooks, leashes, and connecting fishing lines.

Every novice fisherman wonders how to tie a fishing hook, which method is more reliable and easier? We offer you 12 ways to tie a fishing hook, where experienced fishermen can also find something new for themselves.

1.Blind node. This method is considered one of the main and simplest for quickly and securely attaching a fishing hook to a fishing line. After making a loop at the end of the line, carefully thread it through the eye of the hook, and then re-thread the point part of the hook through it. This creates a strong and secure fastening that is very difficult to untangle. This method is especially suitable for thin lines made of polyamide and cotton materials.

2. Bayonet knot. If you make two special half-bayonets on the shank of the hook, as shown in the figure, the fishing hook can be very conveniently and firmly attached to almost any fishing line. This method is widely used among both amateurs and professionals. The only thing is that this method is not recommended for use in combination with synthetic types of fishing line to avoid slipping.

3. Canadian eight. But for synthetic fishing lines, another type of fastening is perfect - the so-called Canadian eight. In this case, the fishing line is threaded into the eye of the hook, clasps the shank and, describing a figure eight, is directed into the resulting loop. Despite the excellent quality of such a knot and the strength of the entire structure, it is quite easy to untie it if the need arises.

Fishing knots are used by anglers very often; they can help you connect two fishing lines of different diameters, tie a jig or hook, wobbler, silicone bait or a spoon, weight or swivel. This is a very responsible process, because if you use the wrong knot or tie it incorrectly, there is a high risk of the line breaking or untying. Let's take a closer look at some questions about the types of fishing knots depending on their purpose and talk about the correct tying of a fishing knot.

Some of you may have noticed that in the catalogs of various fishing companies and on the boxes of some products (hooks, cords or fishing lines) instructions on how to knit fishing knots are often indicated. These units are suitable for gear in the category or on the box of which this diagram is depicted. They are constantly updated and have very large stock strength.

But no matter how strong the knot is, in any case it negatively affects the strength of the fishing line, some deteriorate it almost twice. And this, in the worst case, can lead to a breakage of the gear at the most crucial moment.

You can’t do without knots, because absolutely all gear must be connected to hooks, leashes or lures. Every beginner and experienced angler must know how to tie the right fishing knots; for this, several tricks are used that will help you quickly and without much difficulty tie a strong and reliable knot.

The most simple tips are, for example, wetting the fishing line with water or saliva before tying a knot. This will help reduce friction and increase the strength of the knot. The choice of knot type depends on the diameter of the fishing line used and its purpose. And yes, under no circumstances expose the fishing line to external fire. It is better to bite off the excess with your teeth or cut it off with scissors.

The knitting pattern for the ideal fishing knot has been found by fishermen for a very long time. This is facilitated by the considerable experience of our predecessors in combination with modern materials and technologies, which makes it possible to make very high-quality components. So, with the fact that the knot must be reliable and durable, we have figured out that another important requirement is simplicity. The knot should be very easy to tie.

Palomar knot– the most popular type of knot for fishing hooks that everyone knows. Most often it is used for tying the main fishing line with a swivel, but it also has no equal for tying a hook. Yes, it is also used to tie the weight-heads of silicone fish to a leash or fishing line. But it has one drawback - when tying, you need to fold the line twice, which adds volume and shortens the length of the leash.

Crawford Fishing Knot considered a classic fishing knot for tying a hook. It is used only for hooks with an eye. The knot is very easy to tie and very secure. It can also be used when using regular fishing line and braided cord.

It’s also very simple, but its drawback is its lack of versatility. They can only connect the hook with a regular fishing line; with braided line it will not be able to be tightened properly and it will simply come undone. A photo of tying is shown below.

Fisherman's figure eight knot or, as it is also called, the Canadian eight is excellent for tying an eye hook. Its peculiarity is that it is quite reliable, but if the need arises, it can be easily untied.

Gripping unit(a more popular name is Clinch) is considered ideal for connecting a hook and braided line. Suitable for hooks made of thick and thin wire. Many anglers make a big mistake by tying winding rings with a clinch. In this case, it is not recommended to use it.

Very often used for tying hooks with a spatula. step unit. Such hooks are often very durable and this is a merit of manufacturing technology. They are simply forged. This knot is considered the most durable of all of the above.

Foreign fishing hub, called Twisted Dropper Loop, which is sometimes simply irreplaceable. It can be used to tie a hook into a loop in the middle of the fishing line. It is very often used in sea ​​fishing, less commonly used in fresh water bodies. Allows you to quickly replace one hook with another if necessary.

Also a node that came to us from abroad - Centauri Knot. The peculiarity of this knot is that during its tying, the deformation of the fishing line is minimized, and this makes it possible to achieve maximum strength of the equipment.

A twin of the previous knot, which, although it requires greater deformation of the fishing line and the number of steps during tying, has no less strength and reliability.

Indispensable if you need to tie a large hook to a thick fishing line. It is very often used in sea fishing; among our fishermen we had to observe it several times among “hunters” of catfish.

These were just the basic knots for the fishhooks. There are a lot of them, and all of them are unlikely to fit into one article. We provided only the best of them, in the opinion of the editors. Choosing only what you have personally experienced in practice and your own experience.

Anglers often face the problem of quickly and securely attaching a leash to a fishing line. I, too, have encountered this more than once, and decided that it was necessary to allocate space in the article for fishing knots for leashes. In order to tie the leash to the main fishing line, you need to make loops on it. Moreover, the loop can be made either permanently or temporarily.

Let's take a closer look, first let's talk about the time loop. The huge advantage of such a loop is the ease of its elimination if necessary. The pattern for tying a temporary loop for mounting a leash is as follows:

• first you need to take the main fishing line and make a loop on it;
• then you need to press the loop near its base;
• then take the leash and tie any knot at its free end, I prefer to tie a figure eight knot;
• after which it is necessary to thread the end of the leash with the resulting knot into the loop on the main fishing line;
• and just tighten the loop.

If you are going to constantly fish with a leash, then you need to make a permanent loop. And it is done as follows:

• holding the base of the loop, you need to twist it on the main fishing line, and pay attention that the diameter is about 10 centimeters;
• Then you need to turn the leash around the main line 5 times;
• then thread the other end into the loop and tighten;
• The knot on the leash is knitted according to the pattern described above.

Did you like the article? Be sure to write comments and share it with your friends on in social networks. I also highly recommend watching the video about fishing knots for leashes and hooks, which very clearly illustrates the 10 most popular fishing knots.