Homemade winter fishing rod. No-bait rod with cork reel Winter rods made from champagne corks

Making a winter fishing rod with your own hands at home is not difficult. It is important to understand the features of the type of fishing for which gear is being prepared. A fishing rod for an active mormyshka is not the same as for float fishing on a riser. A number of anglers use, in principle, only home-made gear, while others are modifying store options. It does not matter whether the tackle is made independently or purchased in a store. A person catches a fish using knowledge and skills, and a fishing rod is just a tool. Winter gear, due to its small size, is not as demanding on materials as long summer ones. You can literally make them on your knee from improvised means. In this article, we will analyze how to make a homemade winter fishing rod. Consider various schemes and tips for homemade fishing rods for winter fishing.

baubles

Homemade gear for winter fishing with spinners, balancers and other artificial lures for a predator differ from ordinary fishing rods in caliber. However, the thinnest and lightest fishing rods for nodding lure are somewhat similar to non-revolving ones. Tackle for glitter deserve a separate discussion. Peculiarities self-manufacturing such fishing rods are set out in a separate article. In this publication, we will analyze how to make a winter fishing rod yourself for ordinary fishing, for a nod or a float, as well as for active fishing with nozzle mormyshkas and reels.

Stationary fishing

Stand-up fishing is a classic of winter fishing, with which many beginners begin. It is easiest to make a winter float fishing rod (or a nodding one) for fishing on a stand. There are no requirements for such a fishing rod, on which the game of the jigsaw depends. The main function is to store a supply of fishing line, ease of installation on ice, speed of bringing to working position. The basic design is simple:

1. A device for storing fishing line (reel or reel);
2. Handle (often with a reel, like on a filly, or with a reel, like on a balalaika);
3. Whip;
4. Legs (optional)

The specific option depends on what the angler is going to do. Of great importance is not the peculiarities of fishing tactics, but the personal preferences of anglers. An unconditional plus of homemade products - everything is made for themselves. The process of making winter fishing rods with your own hands with a float or a nod, in fact, the connection of a whip and a handle, a reel (reel) into a single whole. In stationary fishing, the equipment of the rod itself is more important, and not the rod, which performs secondary functions. Therefore, when manufacturing or thinking through the design of the fishing rod, the angler can afford certain liberties.

The simplest do-it-yourself winter fishing rod is made from a piece of hard foam or other similar material. Previously, the filly's body was carved from wood. Now it is advisable to use foam or other plastics - they are easy to get, process. And they are much lighter than wood. The process of making a winter fishing rod from polystyrene foam or polystyrene with your own hands takes several minutes. Reels are cut out of a bar of material with a knife, then the workpiece is processed with sandpaper or a file. A whip is glued into the filly with epoxy resin or any glue that does not dry out in the cold and does not corrode the foam.

As a whip, you can use store-bought polycarbonate or vinyl sixes, fragments of summer gear, as well as improvised materials - for example, plastic knitting needles from an umbrella or broom plumage. In principle, such a fishing rod can already be used on a pond. The line is wound on the reel, passed through the cambric (nod connector) on the whip and equipped. If you get confused, then you can devote more time to this blank for the sake of ethical beauty - how to sand it, paint it.

With handle and reel

You can make a fishing rod for winter fishing with a reel. Such tackle is more convenient for use at depth. Making it is not much more difficult than a filly. The principle is the same, just instead of cutting the reel, a coil is attached to the handle. The handle of such a winter fishing rod is made by hand from any suitable materials. Styrofoam, cork, wood, mop handles, PTFE, plastics - the list is endless. The simplest way- put a few wine corks on the whip and put on glue. A homemade winter fishing rod with a reel is made in various options, as long as the design meets the requirements of fishing. There are no homemade products on the reservoir. This is a huge field for experimentation.

An important point is to think in advance about the result that you want to get. For fishing small fish in the shallows, a light small fishing rod will do. When fishing in the current and depth with bottom rigs, you will need a fairly massive fishing rod that can stand steadily above the hole when the current acts on the line. A lead plate can be attached to the handle for a counterweight - so that the rod does not dive into the hole with a whip. good idea you can borrow from winter trout hunters - place a 20 cm student's ruler on the whip. Then a large carp or bream will not be able to drag the bait into the hole of a gaping angler.

Anglers are often engaged in making homemade winter fishing rods just like that, for the sake of the process. At the same time, do not forget about the fishing conditions for which the tackle is made. It is unrealistic to fully describe all the options - each master considers his own design to be the best. For practical purposes, the simpler the better. If there is a desire to tinker, we collect more complex options, while away the time in the offseason. If you try, you can carve a balalaika out of wood. The end result is to achieve smooth rotation of the coil in the carved niche. The simplest winter fishing rod with a do-it-yourself reel is a whip, a handle and a small summer reel attached to it with electrical tape. For fishing on a riser, it is useful to equip rods with legs.

legs

When equipped with a float, the rod can simply be placed on the ice next to the hole when fishing. But for nodding rigs, the whip is placed directly above the hole for right position gatehouse. For ease of installation, such fishing rods are equipped with legs. You can make legs for a winter fishing rod with your own hands from any suitable materials. The simplest thing is to twist an ordinary clothespin out of wire or fasten it on a whip. Ruler from trout fishing at the same time it is both legs and protection against dragging tackle into the hole.

rigging

If the configuration of the rod allows some liberties in the design, then the equipment requires heightened attention from the angler. This is the most important part of the tackle, which catches the fish directly. Depending on the conditions of fishing and the type of fish, various ones are used, with a nod or a float. The float equipment is adjusted so that when the hook with the shed (mormyshka) is lifted from the bottom, the fish does not feel the weight of the bait. To do this, the float and weight are adjusted so that the entire rig has a slightly negative buoyancy. This is the only way the float will compensate for the weight of the bait when it rises. ABOUT .

Nodding mounts are made according to the same principle. Here, a properly configured gatehouse performs a compensating function. ABOUT .

Nozzle mormyshka and bezmotylka

Under the active game, do-it-yourself fishing rods for winter fishing are made more carefully. All components are important here:

• Lightness of tackle;
• Whip elasticity;
• Correspondence of the caliber of the rod to the subtlety of the equipment.

For use with devils and heavy revolvers, the bone in its minimum version is perfect. More often such tackle is used for flashing on light baits. However, nothing prevents you from making it in a lighter version and using it with a mormyshka. It's a cross between a filly and a puck. The reels are machined in a slightly different shape.

In tackle for mormyshka, the six itself is more important, and not the line storage system. If you have the right tip, you can simply wind two lugs in its lower part to wind the fishing line - you get a miniature and sensitive fishing rod.

Game fishing equipment

Do-it-yourself fishing rod equipment for ice fishing for the game is made according to all the canons and rules winter mormyshka. The main point is the correspondence of the thickness of the fishing line, the weight of the bait and the elasticity of the gatehouse (nodding six). Experienced jigbers prepare a whole set of gear for various conditions so as not to engage in fishing tying. For more details, see the block of articles on our website about mormyshka and remotylka.

The design of a winter fishing rod for fishing without a bait, which is made in a couple of hours from improvised materials, is presented.

The main element of the fishing rod is an axleless reel, which is made of cork from plastic bottle. The advantages of axleless reels, especially when fishing without attachments - when fishing is active, over axial ones are undeniable, and if it can be made quickly, then this advantage is doubly. . .

Fishing rod for no bait with cork reel

I want to invite you to have fun and have fun making a simple axleless fishing rod "Fun" from Palych. He came up with it about five years ago and made a lot as working souvenirs for friends.

So, let's get started .... We will need two bottles - one for five liters from under water, and one liter from milk or kefir, juice, etc. The main thing is that the cork of a small bottle is very tight, but enters the neck of a large one.

We saw off the neck of the milk bottle under the large rim, and the large one - under the small one, next to the cork.

We clean and level the planes to the rims and start filing the diameter of a small cork until it enters and rotates in a large bottle with a slight interference.

Now we cut out the bottom of the large lid, but not under “I don’t want it,” but to the inner ledge that “locks” the neck of the flask.

We also carefully cut this rim to the plane of the bottom of the cork. To the end, of course, do not cut off with a knife ... Then it will be necessary to clean it from the inside with sandpaper, since this is one of the planes of the friction pair.

Now you need to shorten the large cover by 5-6 mm and clean the cut with sandpaper

At the inner insert - coils - we will also cut the cork so that 5 mm remains. On the thread of the cover (inside), you need to drop a few drops of glue to finally fix it. In the groove for the fishing line, it is necessary with a file or something else to grind off the threads on the neck of the former bottle. And you can leave it like that - there will be enough space for 15 meters of fishing line 0.12.

I have PVC plastic - light and dense, and not very hard, it is well processed with a knife. From it I make bosses for handles and glue them to the inner walls of the coil. Maybe one. I like it when a couple of pens.

For handles, you can take long screws and put cambric on them. I found rivets for a riveter (sold in building materials). I drill holes in the bosses and insert the coil handles into them (with glue).

I insert foamed propylene into the inside of the coil, or whoever has something - foam, in general. And the snow will not clog and there is a place to stick the mormyshka.

Now I cut out the base of the fishing rod from the same, but 3 mm plastic.

I lubricate the bead of the case with second glue and glue it to the base. Take care of your fingers and smile! Don't take the Fun rod too seriously. Have fun and enjoy your creativity!

Three millimeters to insert a whip will not be enough, and rigidity is still needed. So I cut another plate.

And then another narrow strip, glue them together and drill a hole for the whip. I have a fiberglass whip for 12 rubles. I like.

Now we drill (or pierce) a hole for the passage of the fishing line. If you want to wind the line clockwise, then drill to the right of the whip. And if "against" - then on the left. Make sure that the hole falls on an empty place near the coil, and not in the collar! By the way, I completely forgot! When we open a milk bottle for the first time, a narrow strip of cork remains on the neck. Remove it, cut it in one place and glue it under the upper side of the reel, thereby creating an additional diametrical stop and forming a groove for the fishing line. (See the photo where I insert the foam into the coil).

The body of the fishing rod in a circle can be glued with a thin strip of plastic, you can use cork, foam, foam ... I'll glue it with foamed propylene. Then I cut the friction gasket out of slippery plastic and insert it into the friction brake pressure ring.

I lightly lubricate all the rubbing parts with graphite grease and twist it merrily for a couple of minutes so that everything gets used. It turned out here is such an axisless fishing rod "Fun" from Palych!

Take another look at the details of "Fun":

We jokingly and without straining for a couple of hours created a good fishing rod. And, although she seems to be joking, she catches the most real fish and behaves very well on the ice. One of my acquaintances liked "Zabava" so much that he made about two dozen of them different sizes and calibers. Well, I think it's overkill. You need to have all sorts of fishing rods and constantly try new equipment. What do you wish!

I'm not saying that all parts can be made very accurately, with markings using a caliper and thickness gauge. I will not talk about high-quality cleaning, careful selection of friction pads, polishing, painting, and finally, other tuning!

Whoever wants to, will do it. The fishing rod is worth it, if only because the fishing line does not get tangled in it and does not wind around the axis, because - it, the axis - is not! There are other advantages, (minimum financial costs, for example ....) - make and test on real fishing! Or you can hang it on the carpet and impress your guests with a masterpiece of your skill! In any case - you had a pleasant and fun time!

In the fishing shops of our time, the assortment fishing tackle huge for ice fishing. However, some anglers practice making winter rods. various types with your own hands.

A homemade winter fishing rod is made in the following cases:

• No desired model in the shop;
• not near a shop, typical for the countryside;
• the habit of doing everything with your own hands at home;
• savings.

We will look at how to make three types of fishing rods in our article:

• for mormyshing;
• for glitter;
• I will put.

remothless

The first homemade winter fishing rod, the manufacture of which we want to consider, is jigging. This is the lightest tackle in terms of weight and the selection of materials for it is not difficult. To make a revolver, we need:

• champagne cork or thick foam;
• plastic knitting needle from an umbrella or other similar rod;
• a set of cambric;
• lavsan or x-ray;
• glue and colored markers.

In the description of the process of making fishing rods, we will mention nods in passing, since this is a separate big topic, and it requires writing a separate article. With regard to the revolver, let's say that for this fishing rod it is easiest to cut it out of Mylar or X-ray film, and assemble the fasteners from cambric of different diameters.

Do-it-yourself winter fishing rod for mormyshing is made in the following sequence:

1. We grind the handle of the fishing rod from cork or foam plastic. To do this, we chamfer one side of the cylinder to make it look like a skirt.
2. We drill a hole in the cork.
3. Glue or firmly insert the whip into it.
4. We mount a nod.
5. We wind the fishing line and tie the mormyshka.

A note regarding the attachment of the whip to the handle. There are two options at the request of the angler:

• at the end of the cork;
• side of the cylinder.

In the second case, it is possible to drop the turns of the fishing line, which helps when playing a large trophy.

For nozzle mormyshka

In the nozzle version of jig fishing, it is used homemade fishing rod more voluminous design. Its handle is cut out of foam, cork or wood in the form of a bracket, this form is called a “filly” in the fishing environment. A groove is cut in it for winding the fishing line, getting a kind of reel. A hole for the whip is drilled in the front end.

A whip for a winter fishing rod of this type is bought in a store or they use knees from broken fishing rods, or they simply cut a branch from a tree, as they did in the old days. A nod is also made from improvised materials:

• metal spring;
• lavsan or x-ray film;
• from a plastic bottle.

The nod holder is constructed from cambric or high-voltage automotive cable.

Universal postavush

We called this type of rod universal, because its use is diverse. Based on this design, you can assemble tackle for such types of winter fishing as:

• float;
• for flow;
• for light shine;
• live bait fishing for perch;
• put on rotan or pike perch.

To make a universal winter rod, you can use different materials, but we will consider one of the options with a mention of the possibilities for expanding the range.

The material for the handle of such a rod can be a simple plastic tube with a diameter of 15 millimeters. The manufacturing process in this case can be described in the following steps:

1. Cut off a piece of 15 centimeters from the tube.
2. At the front end we attach a coil or two wire staples as a reel.
3. We insulate the handle by gluing cork, polystyrene or synthetic isolon on it with the non-foil side out.
4. We plug the ends of the tube with plugs, we first put a weight in the fishing rod for the current to resist tipping over.
5. In the cork of the front of the tube, we drill a hole for the whip.
6. We insert a whip, its options are described in the previous part of the article.
7. We make legs, they can be made from wire, a piece of plastic and so on.
8. If necessary, we equip the fishing rod with a nod or access rings.

Spinner for lure

This type of winter fishing rod is similar to the universal fishing rod in terms of manufacturing method, but its production requires a more careful approach due to the greater responsibility of the tackle when using baits in fishing for large fish. Therefore, we will describe the process in more detail, revealing some of the nuances.

Let's start with the manufacture of the handle. It can be made from the same plastic tube, umbrella handle, garden sprayer or something similar.

Let's use a cork for this. The process of warming the handle looks like this:

1. Chop the cork with a rasp or grater into small pieces.
2. We coat the tube along the length of the future handle with glue, skip the place under the coil.
3. We roll it on a crumb.
4. We wait for complete drying and again spread and roll.
5. Upon reaching the required thickness of the handle, we process it first with a rasp, then with a file and skins of different grain sizes.

At the end of the creation of the handle, we attach the coil. To do this, we mount a reel seat of two clamps to the tube, between which we clamp the legs. From above we wind up an insulating tape to exclude contact of hands with cold metal.

It is impossible to make a coil with your own hands at home, so you need to purchase one of the options in the store:

• plastic inertia;
• "meat grinder" with a small spool;
• small multiplier.

We close the ends of our handle with corks, in the front we make a mounting hole for the whip, where we insert it, its length should be 60-70 centimeters.

Now you need to attach access rings to the whip, there should be at least three of them. We mount the tulip on the tip, distribute the rest along the length of the form. For fastening we use glue, threads and fishing varnish.

We finish making a lure fishing rod by strengthening the nod, if it is required, many fishermen do without this element of tackle.

Source: lovlyavsem.ru

How to make a winter fishing rod with your own hands at home

You can make your own gear for fishing in the winter without any problems. The main thing is to listen to the opinion of experienced anglers. Today we will tell you how and from what the two most popular types of winter fishing rods are made:

• for mormyshing;
• for glitter.

Before we start, let's get into the theory - find out what, as standard, both rods consist of. And then we will listen to the opinions of experts in this matter.

What is a winter fishing rod made of

Both options, a fishing rod for jigging and a fishing rod for fishing with voluminous lures, are somewhat similar, but at the same time there are slight differences between them.

A winter fishing rod for mormyshka fishing most often consists of the following components: a reel or reel (both options serve as a handle), a six and a nod. There may be additions, but the classic version is just that.

In the photo: an example of a classic winter balalaika fishing rod.

A winter rod for fishing with bulky baits is equipped with various “ingredients”, the set of which depends on the method of fishing: fishing with light or heavy lures.

In the first case, the fishing rod consists of a fishing rod, which acts as a handle, reel, whip and nod. Moreover, if you use a flexible whip, you can not use a nod.

In the photo: an example of a classic winter fishing rod, filly.

In the second case, when you went fishing with heavy lures, you will need a serious, durable tackle, which, during animation, imposes higher requirements on strength and rigidity than tackle for jigging. Such fishing rods are completed with a short blank, with several throughput rings, including a tulip, a handle on which either a spinning or multiplier reel is attached.

In the photo: an example of a winter fishing rod with an inertial reel.

So, we briefly learned what two variants of fishing rods in an average configuration consist of. Now let's talk with experts who have made dozens of winter fishing rods on their own, both for mormyshka fishing and for lure.

Nikita (ndup):

- Good afternoon, dear friends, today I will tell you how to make a couple of types of fishing rods with your own hands. The simplest and most effective fishing rod that you can make in a short period of time with your own hands is the so-called Shcherbakov's fishing rod. It is done very simply! After the New Year's table, a cork from wine or champagne remains (made of cork material, not plastic!), Carefully grind the place under the fishing line and glue the six on super glue. The main thing is that the six is ​​amortized, and when biting, the fishing line from the cork begins to bleed, that is, some analogue of the friction clutch is obtained.

In the photo: a homemade cork fishing rod.

The advantage of such a fishing rod is the ease of manufacture, and it does not take up much space. Another big plus is the light weight of this design. The downside is that the fishing line is wound by hand, this fishing rod does not have any spools ...

Another simple and easy-to-make fishing rod is a filly. You can catch it not only using a mormyshka, but also on a lure.

In the photo: a homemade foam rod.

It is also done simply, we take a piece of foam or cork material, we grind the place under the fishing line. We drill a hole into which we insert a six-piece about 20-30 cm long and that's it. The fishing line on this design is also wound by hand, there are no spools.

You can also watch a video where I finalized a nod for a winter fishing rod with my own hands.

Igor (IVH):

- Every angler, whether a beginner or an experienced one, does not matter, over time, after a shopping trip, a certain amount of lures accumulate - spinners, balancers and many other fishing goodies. It is no secret that a huge number of winter fishing enthusiasts hunt predatory fish - perch, pike perch, pike, burbot. But the bait, of course, is different for each predator - they differ in size, weight and other parameters.

How to adapt to these different baits? Someone purposefully catches a perch, and someone likes only winter fishing rods for a balancer. That is, you have to have in the box a whole bunch of various baubles with varying degrees of hardness and long whips? And if in this place all these types of fish are present?

Alternatively, you can get by with store-bought lures, of which there is now an abundance of assortment, but in my opinion it is better than my own, made by myself - no! It meets all the necessary parameters of a fisherman - weight, length, stiffness of the whip, or vice versa softness. Here everyone chooses for himself. In shop fishing rods, these parameters may not match. Therefore, at one time I was also puzzled by this question - what the shops offered did not fit my fishing conditions. It just didn’t fit in my hand - and I didn’t want to feel discomfort while fishing. After all the thought, I came to an unequivocal decision - it's time to start making a fishing rod for your needs.

After many years of experience in the manufacture of such gear, I can say that there are a great many options. However, they all differ only in nuances.

In general, there are two types of fishing rods - with a reel and without a reel. The second option is the simplest - a variety of fillies, pistols and handles of any shape made of lightweight material, for example, made of foamed PVC. For example, I made from foam, pine bark and other unusual materials. Such rods are the lightest and most weightless. But one inconvenience for such fishing rods is that you have to wind the line with your hands. When moving from hole to hole, the whole thing gets confused ... You spend time unwinding, you get nervous ... Is it really necessary for fishing?

That is why I consider a fishing rod with a reel to be the best option for perch fishing in winter. Fishing line for winter fishing is quickly etched and reeled up. A homemade fishing rod with a reel can be made from anything. But the most the best option, I believe, cork handle from an old spinning rod with a reel seat. It is simply cut to the desired length and muffled from the end.

Whips can be made interchangeable for your fishing conditions, for all occasions and any fish. From the most powerful to the most delicate, for example, perch. For pike and zander, fiberglass rods from old telescopic rods are best suited. Modern shop whips, in my opinion, are a bit soft. Carbon fiber can also be used on perch. Do you make a fishing rod for walleye? I don't recommend carbon fiber. I broke a couple of whips and abandoned this material.

Another version of the fishing rod can be made from an ordinary balalaika by replacing the standard vinyl whip with a flexible carbon fiber one, and attaching a spinning ring to the end. A nod is not needed here - the tackle is so delicate that the bite of even a small perch will be visible. In the photo is my standard set of homemade baubles. I made it a long time ago and still use it. They lie perfectly in the hand, the weight is small, the hand does not get tired, the bait animates without problems. Such homemade fishing rods, again, in my opinion, are very sensitive. Each knock on underwater snags or stones is transferred to the hand.

Whips are easy to change. You can either pull it out or put it in.

And in the end, I’ll reveal a little secret - in order to know the depth in each hole, it is not necessary to use a depth gauge or echo sounder - on the line of the reel, risks are made every meter with a permanent black marker - you bleed the line and see how many meters under the ice.

Sergey (buterat):

- I came to this question in the same way as to all other homemade products - in the evening before fishing, where I had to catch perch on light baubles (a new way for me), I studied materiel on YouTube and came across a video about a nodding fishing rod. Naturally, I had a desire to do it myself. And immediately! By that time, all the stores were closed, so I had to make do with what was available. Fortunately, such a fishing rod turned out to have not so many details: a reel for winding fishing line and a hollow whip. It is this “recipe” that I want to describe to you.

I dug up a small foam plastic balalaika in my fishing locker - it will be warm, convenient and quickly change the length of the fishing line, since I like to run after active fish, and not sit in one place, and light weight is one of the most important parameters hookless fishing rod. The issue with the hollow whip was also resolved quickly - the float rod was used, thin and flexible.

We remove the native whip from the balalaika and drill a hole in the body so that the fishing line along the new hollow whip enters the reel without kinks in a straight line - this way the fishing line will be less injured on the edge of the body or whip. In addition, this way the fishing rod lies more comfortably in the hand, a la the handle of a pistol.

We glue the whip into the body of the coil with glue, I used the “crystal moment” - it is transparent and does not grab instantly, which allows you to set the whip evenly without deviations. After the glue has set, I advise you to process the end of the whip inside with a round file - this will slightly smooth out its sharp edges and prevent you from cutting the fishing line and losing your favorite spinner.

The last thing I did was put a piece of bright heat shrink on the tip of the rod, since carbon is fibrous and can delaminate, and the tube will prevent this.

That's all, it remains to wind the fishing line, prepare lure for winter fishing, sharpen mormyshki for roach, for example, and into battle.

Such a rod is easy to manufacture, light in weight and very sensitive - you will not miss a single, even the slightest change in the game of your micro-lure, and there is nothing to say about the bite.

By the way, after fishing with similar baubles, I came to nodding rods in no-bait fishing, but that's another story ...

Alexander (skaz):

— You know, I pretty quickly came to the conclusion that it makes no sense to make fishing rods. But alteration or adjustment is much easier both in terms of labor costs and time. Personally, my opinion is that for people who are engaged professionally, it probably makes sense to do all this, develop from scratch, invent, achieve some special characteristics in the gear they make. But for the general mass of anglers - it makes no sense. But again, this is my opinion, which concerns mostly rods for vertical lure of pike perch. By the way, in my opinion, the most successful fishing rod for perch spinners is the “Petersburg”, which is made in the form of a pistol grip. If you describe my revision, then it is as simple as possible. First, you choose the lightest rod in terms of weight. You look at what the whip is made of and what it is, either you change it or shorten it, depending on the requirements for stiffness. You mount a tulip, a couple of access rings. And you have in your hands a cheap and reliable tool for winter fishing.

Video: We make a simple winter fishing rod with our own hands

We offer you one of the above options for making a winter fishing rod with your own hands. We will make it from an ordinary champagne cork.

From an ordinary balalaika, you can make the most convenient and comfortable tackle, which is a pleasure to fish. The other day we filmed another series of our video blog, in which Alexander Serykh (CCM in fishing) shared his secrets for finalizing balalaikas.

Friends, we hope that the advice of our users will help you not only in finalizing, but also in creating your first winter fishing rod from scratch. If you have your own "cooking recipes", then feel free to share them in the comments.

Source: www.fishingsib.ru

Materials for creating winter fishing rods

The main elements of tackle for ice fishing are the handle and the whip. They can be made from different materials. Before you make a winter fishing rod at home, you should choose the most suitable options for yourself.

What is the whip made of?

The whip has a serious responsibility for the quality of the wiring and the effectiveness of the strike. Therefore, this homemade element must be optimal in length and rigidity. Manufacturers of budget fishing products usually use materials such as polypropylene or polystyrene. They quickly deform or break.

• A good polymer for making a whip is fiberglass. It is suitable for most types of winter fishing rods.
• When you want to break through the hard mouth of a pike or walleye, it is better to use a carbon fiber whip.
• Juniper has long been a traditional material for the manufacture of a whip. Even now, some anglers successfully use it on their fishing rods.

As for the length of the whip, for jig tackle it is limited to 20-30 cm, lure use longer elements (50-70 cm).

Handle materials

One of the main requirements for the handle is convenience, lightness and comfort. But it must be hard enough to securely fasten the whip.

• Our grandfathers made pens mainly from wood. It is pleasant to hold even with a bare hand, it is well processed and durable.
• Today, wood has been replaced by such modern materials as cork, dense foam, polystyrene foam. They have lightness and buoyancy, are well processed, do not freeze over.

The best homemade products for winter fishing, manufacturing examples

A lot of homemade products have been invented, which differ in the complexity of manufacturing, weight, and cost. Every fan of ice fishing wants their own ice fishing gear to be simple, affordable and effective. Therefore, we will dwell on several options that any angler can implement.

Create a rewinder for 10-15 minutes

The use of such non-attached mormyshkas as “devil”, goat”, “uralka” or “nymph” allows you to catch roach, bream or perch without planting a small bloodworm in the cold. But in order to give these lures a believable action, a light and sensitive rod is required. It can be done in 10-15 minutes if you prepare all the necessary details in advance.

1. A small pen can be easily made from a champagne cork or a piece of Styrofoam, giving it the desired shape. The handle will also serve as a kind of reel for storing a supply of fishing line.

It is necessary to make a small groove on the handle so that the fishing line does not fly off the rod on its own. This can be done with a clerical knife and sandpaper.

Source: fishelovka.com

Fishing for bloodworms and mormyshka

The most common purchased fishing rod options are - balalaika And filly. Options for independent products - imitation of a balalaika and a filly, as well as numerous options for known and unknown handmade designs.

Winter fishing rod with a handle - cork or foam line storage

The rod consists of the following elements:

1. Pen- timber storage from cork or polystyrene.

   Made from champagne cork

   • a channel for storing fishing line is cut in the cork with a knife at a distance of 1/2 cm from the edge, ½ cm deep and wide;
   • on the other side of the cork, a transverse hole for the whip is drilled. The hole diameter must be 10% smaller than the maximum whip diameter.
2. whip.

   Whip length 30-50 cm. It must be flexible and durable.

   Use:

   • the knee of an old fishing rod or spinning rod, cut to length if necessary;
   • plastic knitting needle;
   • processed juniper branch;
   • rings should be installed on the whip every 10-15 cm to eliminate sagging fishing line. You can use ready-made purchased rod rings or rings from an old rod.

   You can make your own rings from ferrous wire 0.6-1 mm:

   • wind the wire on any cylindrical object of a suitable diameter for two turns;
   • bend the ends of the wire perpendicular to the plane of the ring in opposite directions;
   • cut off excess wire with scissors for metal, leaving 1-2 cm at both ends;
   • screw the rings to the whip with thin, harsh threads turn to turn;
   • coat the joints with waterproof glue.
3. Nod.

   The nod should provide an attractive bait play.

   Improvised materials for making a nod:

   • PETT container for drinks;
   • polyethylene canister;
   • old fluorographic picture;
   • clock spring.

   Manufacturing process:

   1. A conical strip is cut out with the following parameters: length 10-14 cm, narrow part 2-3 mm, wide part 4-5 mm.
   2. Rings for passing fishing line (2-3 pieces) are easiest to do this way:
   • attach a ballpoint pen or a piece of wire of the required diameter to the nod blank in the right place;
   • put on top a cambric from a heat-shrinkable tube of a suitable diameter (cambric length 2-6 mm);
   • warm up the cambric carefully. The cambric will tightly cover the nod and the rod on top of the nod;
   • pull out the rod.
4. To pass the fishing line instead of cambric at the end of the nod, it is better to make a hole at a distance of 3-5 mm from the edge.
5. Attaching a nod to a whip. The nod is attached to the whip with a wide end.

• a silicone tube 3-4 cm long is tightly put on the end of the whip. A flattened segment of the rod from a ballpoint pen 3-4 cm is glued to the bottom of the tube to pass the fishing line. The tube is lubricated with petroleum jelly or silicone ointment. The nod is attached from below to the rod;
• a silicone tube of a larger diameter is tightly put on top.

The nod can be moved between the tubes back and forth by adjusting the length of the nod and the stiffness of the guard.

Making a winter rod with a cork or foam handle takes one hour and is estimated at 0 rubles, it can be easily used in sport fishing.

How to catch

1. Screw 20 m of fishing line 0.08-0.12 mm onto the cork gutter.
2. Pass the line through the rings on the whip.
3. Pass the fishing line into the flattened tube (ballpoint pen) on the nod.
4. Pass the line through the rings on the nod.
5. Tie a mormyshka (or a hook with a nozzle).
6. Gradually removing the fishing line from the cork forest storage, lower the mormyshka to the very bottom of the reservoir.
7. Hit the bottom of the pond with a mormyshka a couple of times.
8. Gradually winding the fishing line on the cork storage area, play with the bait, waiting for a bite.
9. In case of a bite, hook the fish with a rod.
10. Put the rod aside, fingering the line to pull the fish out onto the ice.
11. Take the fish off the hook.
12. Wind the line around the cork.

Fishing rod type "filly" with a wooden handle

"Fire" can be used for both mormyshing and float fishing.

1. We saw off a piece of 14-16 cm from the wooden handle of an old unnecessary mop. This will be the handle of the fishing rod.
2. Line storage device.
   • wooden cylinders 2 pcs. 3-5 cm high with a hole for screws drilled in the center of the circle (you can use the wooden handle of a children's net). At 1 cm from the edge of the cylinder, make a recess 2 cm wide with a knife for storing fishing line;
   • standard wooden spool for thread with a sawn-off side (the height of the spool without one side is 3.5 cm) 2 pcs.

   Screw 2 coils or 2 cylinders on the edges of the handle with screws.

3. Drill a hole in the handle in the center of the circle for a whip with a depth of 6 - 8 cm with a diameter equal to the maximum diameter of the whip.
4. Fill the hole for the whip with epoxy. Insert whip 21-28 cm (knee from an old telescopic rod). The whip must be strong and have rings for threading the line. Remove excess resin with a cloth.
5. To prevent wetting and icing wooden parts they can be stained and pierced, or painted over with facade paint for wood.
6. To use the filly for mormyshing, a nod is strengthened on the whip in the same way as in paragraph 4 from the “Nod” section.

With an open reel for spinning, mormyshing, float fishing

In a real balalaika inertial coil with a stopper is recessed in the round handle of the fishing rod. It is problematic to make such a coil at home on your own.

You can glue a used line spool to the rod handle, but then you have to manually wind the line onto the spool.

You can use a purchased inertial coil, but the manufacturing process will become much more complicated - you will have to cut a round hole in a round handle, come up with a reliable way to mount the coil inside the handle hole.

Much it is easier to use an inexpensive purchased inertial coil(from 30 rubles) and fasten it to the rod handle with insulation or by drilling two holes in the reel holder, fasten it with screws on the handle.

With wooden handle and open inertial coil

1. A piece 20-22 cm long is sawn off from the wooden handle of an old unnecessary mop.
2. Cork chips are mixed with waterproof glue and gradually, layer by layer, applied to the handle at the grip point (10-12 cm). You can create a comfortable shape of the handle according to the request of the angler.
3. After the glue has dried, the handle is sanded with fine sandpaper (you can cover the handle with yacht varnish).
4. In the center of the wooden handle, from the side of the whip attachment, a longitudinal hole is drilled to a depth of 6-8 cm with a diameter equal to the diameter of the thick end of the whip.
5. The resulting hole is gradually filled with epoxy.
6. Insert a whip from an unnecessary telescopic rod 40-70 cm long. Carefully center the whip in place.
7. Carefully remove the exposed resin.
8. After the resin has hardened, the place where the whip is fixed in the handle is sanded with fine sandpaper to remove bumps and sagging of the resin.
9. A purchased inertial coil with a brake is screwed to the handle.

Such a fishing rod can be used with a nod for mormyshing. It can also be used for float fishing and for lure. In these cases, the nod is not used.

Pistol

Winter fishing rod with pistol grip used for flashing on the current and in stagnant water. Because when attacked predatory fish the structure is subjected to heavy load, its handle can be made of solid material - wood.

1. The required shape of the handle in the form of a pistol is cut from a block of wood.
2. The final rough shape of the handle and line holder is cut with a knife.
3. The forest storage is located on top of the pistol and has an arbitrary appearance. The main thing is that it is convenient to wind the fishing line on the forest storage.
4. The final shape is given by sanding the surface with fine sandpaper.
5. The handle is treated with stain and covered with deck varnish.
6. A hole for a whip is drilled in the horizontal branch of the handle (the whip must be strong and flexible. A spinning tip with a test of 10–30 will do).
7. A waterproof adhesive is applied to the whip at the junction with the handle. The whip is inserted into the hole.

When catching a predator with a fishing rod of this design, the hand experiences less stress when jerking a heavy fish. Often winter fishing rods are equipped with a hand loop made of strong rope so that the pike does not pull out a light rod. For a pistol, the need for a rope loop is eliminated.

Materials suitable for winter rod handle

Lightweight material is suitable for mormyshka and float fishing, since it is supposed to catch peaceful fish and the handle will not experience strong jerky loads, but the angler's hands can “fall off” if for several hours in a row in the cold you have to pull a heavy fishing rod all the time.

• cork;
• dense foam;
• foamed pvc.

These materials are not suitable for glittering. You need a strong material that will not collapse under heavy load.

Such material should have low thermal conductivity so that hands do not freeze. It is desirable that the weight of the material is not too large.

Naturally, it is a tree.

There is another option for making handles - epoxy resin.

Cured epoxy:

• slightly inferior to wood in strength;
• lighter than wood;
• thermal conductivity is lower than that of wood.

At the same time, you can make any complex and fancy shape for pouring handles. It can be used for all types of winter fishing.
Pouring handles of any shape from epoxy resin:

1. In a semi-hardened gypsum mortar, various objects can gradually create any complex impression. You can immediately immerse up to half the whip in a semi-hardened gypsum mortar.
2. Epoxy resin is poured into the hardened gypsum mortar.
3. Another portion of the gypsum mortar is poured into another container. In a semi-hardened gypsum mortar in this container, an impression is made for the second half of the product - a mirror image of the first half.
4. After the epoxy resin hardens, the planes of the two halves are smeared with epoxy and connected.

Thus, you can pour all the handles listed above, including the balalaika. The handles of the filly and the pistol can be poured immediately along with the timber storage.

Autohook

Postavushki and zherlitsy are not fishing rods. There are anglers who basically do not use devices for passive fishing. However, even such anglers during a good bite sometimes want to use an automatic mechanical tool to take a break. But a fishing rod without a special device will not hook the fish itself.

Simple design for auto hooking shown in the drawing and consists of:

1. Rectangular platform 10x20 cm for attaching a winter fishing rod of any shape. A simple option is to attach the fishing rod handle to the platform with plastic ties with clamps.
2. On the reverse side of the platform in the middle, nails are driven in and bent to form brackets for the pipe and for the springs.
3. A frame fixed permanently on the base with an upper crossbar made of a tube.
4. Two springs with rings.

Operating principle:

The rod is placed on the platform and fastened with ties. Springs are put on hooks with rings. It is important that the platform is in a horizontal position. When biting, the platform tilts, the ring of the first spring flies off the hook, the edge of the platform rises sharply along with the fishing rod, and the fish is caught.

Despite the rich assortment of tackle for any season in fishing shops, fans of ice fishing do not stop inventing homemade winter rods. The main reason lies not in the desire to save money, although this factor is also present. For the majority of domestic anglers, only homemade products can provide preferences both in terms of convenience and efficiency. And for many residents of remote areas, due to the lack of specialized stores, the manufacture of fishing tackle is a common thing.

Winter tackle is compact and simple, because ice fishing requires the presence of an angler right at the hole. Thanks to this, there is a wide scope for creativity and new inventions. What kind of rods do anglers make for ice fishing?

All homemade fishing rods for winter fishing can be divided into several categories according to the method of fishing. Ice fishing is a multifaceted hobby of millions of Russians, everyone finds their favorite niche.

• Lovers of graceful fishing for white fish and perch use float rods. They are equipped with a nozzle mormyshka or ordinary hooks with a sinker. For these anglers, the rod must have a stable position on the ice, and a supply of line can be stored on a small reel or on the tackle handle. A striking example of such homemade is a filly fishing rod, which owes its name to its resemblance to a horse. Most often it is a nodding rod for stationary fishing.
• Another category of fishermen prefers to actively fish with a reelless mormyshka. With this method of fishing, the fishing rod is in the hands of the whole fishing, it rises up and down, the angler gives the jig trembling and oscillating movements. So that the hand does not get tired, the revolver is made light and comfortable. Many options have been invented where the handle is made of cork or foam, but the nod plays the main role.

• To catch a predator on a balancer and a lure, anglers make the longest fishing rods. Sheer lure consists in tossing artificial bait over the bottom, where it should tempt the predator to bite. Therefore, the whip is made long and rigid, it is equipped with an elastic guard, and the handle can be made of wood or foam. It is important that the hands are warm and comfortable to hold the tackle.
• Postavushki are considered gear for passive fishing of such fish species as perch, pike perch, trout, rotan. Live bait or other bait clings to the hook, the equipment is lowered into the hole, and the fishing rod is set in a vertical position with a slight slope towards the hole. A bite is determined by a bright gatehouse. Usually several posts are installed, and the angler takes such a position to clearly see all the gear (read more about choosing a live bait for fishing in our article).

Materials for creating winter fishing rods

The main elements of tackle for ice fishing are the handle and the whip. They can be made from different materials. Before you make a winter fishing rod at home, you should choose the most suitable options for yourself.

What is the whip made of?

The whip has a serious responsibility for the quality of the wiring and the effectiveness of the strike. Therefore, this homemade element must be optimal in length and rigidity. Manufacturers of budget fishing products usually use materials such as polypropylene or polystyrene. They quickly deform or break.

• A good polymer for making a whip is fiberglass. It is suitable for most types of winter fishing rods.
• When you want to break through the hard mouth of a pike or walleye, it is better to use a carbon fiber whip.
• Juniper has long been a traditional material for the manufacture of a whip. Even now, some anglers successfully use it on their fishing rods.

As for the length of the whip, for jig tackle it is limited to 20-30 cm, lure use longer elements (50-70 cm).

Handle materials

One of the main requirements for the handle is convenience, lightness and comfort. But it must be hard enough to securely fasten the whip.

• Our grandfathers made pens mainly from wood. It is pleasant to hold even with a bare hand, it is well processed and durable.
• Today, wood has been replaced by such modern materials as cork, dense foam, polystyrene foam. They have lightness and buoyancy, are well processed, do not freeze over.

The best homemade products for winter fishing, manufacturing examples

A lot of homemade products have been invented, which differ in the complexity of manufacturing, weight, and cost. Every fan of ice fishing wants their own ice fishing gear to be simple, affordable and effective. Therefore, we will dwell on several options that any angler can implement.

Create a rewinder for 10-15 minutes

The use of such non-attached mormyshkas as “devil”, goat”, “uralka” or “nymph” allows you to catch roach, bream or perch without planting a small bloodworm in the cold. But in order to give these lures a believable action, a light and sensitive rod is required. It can be done in 10-15 minutes if you prepare all the necessary details in advance.

Helpful advice! It is necessary to make a small groove on the handle so that the fishing line does not fly off the rod on its own. This can be done with a clerical knife and sandpaper.

1. A transverse through hole is drilled about 1 cm from the edge. Its diameter depends on the thickness of the whip.
2. A plastic rod, a lollipop tube, the tip of an old telescopic rod, etc., are suitable for the role of a whip.

   

   Photo 2. A whip made from a plastic knitting needle for a children's umbrella.

   

   Photo 3. The whip is inserted into the cork-handle.

3. A nod from a PET bottle or X-ray film is mounted to the whip using cambric. Another piece of insulation is glued on top to pass the fishing line. A hole is made at the end of the nod or cambric is glued.

   

   Photo 4. Film nod.

4. It remains to set up the work of the tackle by winding the fishing line 0.08-0.12 mm and tying the mormyshka. The approximate weight of such a fishing rod will be 10-20 g. Due to the simplicity and cheapness of manufacturing, you can make several different models for existing mormyshkas.

How to "saddle" a filly?

The unusual name of this winter fishing rod attracts the interest of beginner anglers. Filly is the common name for a whole range of float fishing tackle that has an unusual handle shape. It allows not only to hold the whip and store a supply of fishing line, but also to give the rod a stable position on the ice.

1. The most time-consuming and difficult task in the manufacture of filly will be cutting out the handle. The material is solid foam. Processing is carried out using a clerical knife, file, sandpaper. In the classic version, a protrusion for winding the fishing line should turn out at the top of the handle, and two wide legs at the bottom. In the end part, a longitudinal hole is made to a depth of 20-30 mm for a whip.
2. The role of a whip can be performed by a standard purchased product, the tip of an old spinning rod, feeder, or just a juniper twig.
3. A nod is given in case the angler has to move away from the hole or wants to play a little with the bait in the upper layers of the water. For this purpose, a gatehouse made of a PET bottle, an X-ray or a steel plate is suitable. A high-voltage automobile wire or several tubes are used as a holder.

The advantage of the filly is a high degree of buoyancy. Even having missed a bite, the angler does not lose his tackle. The handle will play the role of a rescue buoy.

Making tackle for lure

A good catch of pike, perch or zander can provide the angler with a homemade fishing rod. Sheer fishing means constant vertical play artificial bait. It is performed in different water horizons, so it is better to equip the product with a coil. For a complete set, you can use a simple inertial model made of plastic, a small meat grinder or a modern multiplier.

1. One of the main requirements for a lure is the stiffness of the whip. It is better to make it from a feeder quiver tip or the tip of a spinning rod 50-70 cm long. This is especially important when fishing for pike and pike.
2. The handle can be cut from moisture-resistant wood or plastic products can be used, covering them with a layer of cork. To do this, the cork is crushed and glued to the handle. Usually several layers are applied, after the glue has completely dried, rough abrasive processing and subsequent grinding are performed.

1. The coil is attached to the handle with the help of clamps and electrical tape.
2. The lure can be additionally equipped with a nod if the whip is hard, and the baubles and balancers are light. It can be made of wire spring, steel or lavsan plate. For mounting on a whip, it is better to use special holders.

Photo 5. Fishing rod from improvised materials.

When the angler wondered how to make a fishing rod for winter fishing, you should immediately pay attention to the materials at hand. Many fishing masterpieces are made from unnecessary items. At the same time, fishing rods are distinguished by convenience and high catchability.

For every fisherman, the most valuable and irreplaceable thing is, of course, a fishing rod. It is to the fishing rod that a real fisherman treats with special trepidation and some love. A fisherman can choose a fishing rod for an eternity, while carefully examining every detail of the rod.

Important element any fishing rod is its handle. If the handle is uncomfortable, or not long enough, or vice versa requires shortening, then fishing will not work. After all, comfort and convenience are the main conditions in any business, and fishing is no exception here.

In order not to waste time and energy on choosing a suitable handle, we suggest making it yourself at home. The main material in this will be wooden corks.

Tools that will be useful in the process of making a cork handle for fishing rods, spinning:
- Knife for cutting paper
- Marker
- Drill size 8 mm and drill
- stud with nuts m-8 and needle file

Cork handle manufacturing process:
First you need to cut the wooden plugs into small circles "washers". This is done very easily with a knife.