Vacuum cleaner for the pool from the manufacturer or do it yourself. How to clean a pool with an underwater vacuum cleaner Homemade pool vacuum cleaner using a submersible pump

Good day, dear friends and site guests! Today we will talk about how to make a vacuum cleaner for a pool with your own hands. So, your own artificial pond is a source of positivity and a favorite place for children. But the thing is that it requires care. Otherwise, it will quickly turn into a puddle, teeming with bacteria and emitting an unpleasant odor.

Since it is installed on open place, leaves, dust and other contaminants often fall into it. You can fight this different ways. First of all, this is draining the water and manual cleaning. But not always there is a sewage system at the dacha; draining water into a ditch is also not entirely correct. If you do this often, sooner or later conflicts with neighbors will begin. Mosquitoes love to lay larvae in a swampy ditch, which will then prevent them from living a normal life.

How to get out of the situation. We suggest you make a pool vacuum cleaner with your own hands.

Do-it-yourself water vacuum cleaner for the pool: it will save you from dirt

The type of artificial reservoir does not matter at all. We will not talk about capital structures here, since they require a different approach. A person who can spend several million will buy a sophisticated cleaning system along with an artificial pond. But the owner of small tanks has to rack his brains, struggling with manual cleaning.

As we know, water is an excellent breeding ground for a wide variety of bacteria, including those dangerous to health.

Moreover, the font is located in the sun and warms up perfectly. And in warm water, microbes multiply at cosmic speed. Therefore, you need to use not only a water vacuum cleaner for the pool, but also follow some rules:

• It is necessary to cover the artificial reservoir daily to avoid pollution;
• You can use it only after taking hygiene procedures, and only in a swimsuit. It is forbidden to enter it with shoes on and pets must not be allowed to swim;
• You should get a special net or bucket to collect debris that ends up on the surface;
• Chemicals should be used to treat water. This is necessary in order to prevent the growth of aquatic plants and harmful microorganisms;
• You need to change the water regularly;
• When dry, it is thoroughly cleaned and washed. You will also need a special device that helps fight a wide variety of contaminants.

An artificial reservoir will have to be looked after, and this is necessary and very important. Otherwise, in dirty water You can easily catch some unpleasant disease. It is especially important to do this if children are swimming in the pond.

Pool vacuum cleaner device

To make the process of caring for an artificial tank easier, you need to use a pool vacuum cleaner. They significantly simplify the care procedure. This unit will clean the walls and base. You can buy a variety of options in stores. They're just not cheap. It's much easier to do everything yourself. In addition, the work ahead is not the most difficult.

Before getting started, you need to understand the structure of the unit. The main details are:

• A pump that cleans and distills liquid;
• Filter elements;
• Hose approximately 1.5 meters long;
• Cleaning device;
• Pen.

The video (just below) will help you understand how to use a pool vacuum cleaner. During the cleaning process, the unit sucks in liquid, which is then filtered. Maintaining optimal power is ensured by regularly replacing filtration elements. Even a homemade unit has sufficient power, which is quite enough to clean a medium-sized reservoir.

It will save time and not waste a lot of effort doing such work manually. You don’t have to hire specialists, who, of course, have to pay for services.

Main types of water vacuum cleaners for pools

There are three main types of these units:

• For manual cleaning;
• Vacuum type;
• Automatic or robots.

A hand-held water vacuum cleaner for a pool has the following design: a brush that is mounted on a rod, and a hose of the required length is added to it. In turn, the hose is connected to the filter elements of the artificial reservoir. Its manipulations are exactly the same as when working with a conventional unit that housewives are accustomed to using.

You can vacuum the surface; it copes well with mucus, dirt, and debris. Since its structure is the simplest, then, as a rule, it is precisely such units that are made by craftsmen.

Let's make a brush for the future vacuum cleaner

To make a water vacuum cleaner with your own hands, you need some material. You can get them at any plumbing store. The assembly of the unit itself will take a minimum amount of time.

So, to create it we will need:

• Brush;
• Plumbing plunger (it will serve as a simple intake nozzle);
• Corrugated hose;
• Polypropylene pipe;
• Plugs;
• Tee.

Any brush is suitable for our unit. If you have an old unnecessary vacuum cleaner at home, you can use the brush from it. It is also suitable for cleaning the pool. However, this brush has some disadvantages. Its size is small, so cleaning the pond will take more time. Even if the bowl size is small, a small brush may not be entirely convenient.

If you don’t want to suffer for a long time during cleaning, then there is a fairly simple way to make the necessary device.

To do this you will need:

• Polypropylene pipe;
• Tee made of plastic;
• Plugs.

You need to take a polypropylene pipe, cut off a small piece, the length of which is 0.25-0.3 m. After this, you should cut along the piece of pipe (a cut of approximately 4-5 mm). Then the piece is cut into two parts, a plastic tee is inserted into them, and then the parts are soldered. Polypropylene plugs cover the edges of the future brush. To the third outlet of the tee, you need to attach another piece of polypropylene pipe (it is not cut).

This part of the part will be used to connect to the vacuum cleaner.

However, the resulting DIY pool vacuum cleaner, as in the video above, can hardly be called a cleaning device. Therefore, it can be improved somewhat by gluing the rubber part from a car wiper onto the pipe in which we made a slot. It will work efficiently.

If you want to make a more convenient device, you can attach a strip with stiff bristles to the pipe. If additional accessories are required, they can be screwed using small universal screws, or simply glued.

Note! You need to use high-quality glue that can withstand contact with water.

The device should be made carefully, since even minor burrs or sharp edges can ruin the material of the artificial reservoir.

Don't know how to make a pool vacuum cleaner with your own hands?

So, how to make a pool vacuum cleaner with your own hands? The skimmer should be disconnected from the inlet type valve that is included in the pump design (although not always). Now you need to connect the corrugated pipe. To do this you need to use a sealant. Free part connects to a polypropylene pipe.

On bottom part When using a home-made unit, a nozzle designed for collecting water is put on. You can use our homemade product as a brush. If a plunger or fitting is used, then cuts need to be made in them, which will allow for a tighter fastening. However, it is most convenient to use a brush. There are models of these devices equipped with backlight.

Which one is more suitable depends on the size of the reservoir. Worth paying attention! If you use a paper filter, you need to remove it, since it will not be able to cope with small-sized debris.

Do-it-yourself water vacuum cleaner for the pool: finishing the job

So, our unit is assembled, all that remains is to try it in action. To connect, you will need a corrugated hose, which is installed on siphons located under the sink. Craftsmen use two connection options:

• This method will require a sewer adapter (the most optimal is a rubber one). It is tightly placed on the water intake and hose;
• The next method is to use a plunger. In this case, you need to cut a hole strictly in the middle. A part of a polypropylene pipe is inserted into it. This design is installed on the water intake source.

Our design lacks a handle. To make it you will need a piece of polypropylene pipe. The optimal length is 1.5-2 m.

Now you can use our DIY pool water vacuum cleaner. You need to turn on the pump and start cleaning. First, clean the part that is located above the water, the walls. At the final stage, the bottom is tidied up. Of course, the work of making a homemade unit will take a lot of time. You will have to allocate part of the budget for the purchase of spare parts.

But this is fully justified by the significant savings in money.

Why a vacuum cleaner is convenient and why you should make it yourself

In fact, this is not the standard unit that we are used to using when cleaning the apartment. This is a pump that purifies water by distillation using several filters. The handle makes it easy to clean the sides and bottom. There are models that allow you to use several filters, or change them during operation if the contamination is strong.

Thanks to the video (at the end of the article) on how to create a vacuum cleaner for a pool with your own hands, we successfully completed our job. In turn, the unit does an excellent job of removing sediment and unpleasant plaque. You can remove stains and film. If you use it correctly, it will help you for a long time. And you won’t have to spend a lot of time and effort on general cleaning.

Is it worth making a pool vacuum cleaner yourself?

Today, purchasing a ready-made unit in stores will not be very difficult. The range of many manufacturers is represented by a variety of models. Therefore, you can easily find what you need. However, the cost of the units that are used to maintain the reservoir varies greatly.

A small unit will cost several thousand. It’s just difficult to predict how well he will do the job. A powerful device is expensive and will require serious expenses. Automatic robotic devices that can move along the bottom of the bowl remove dirt well. But their cost reaches several hundred thousand.

So, a DIY pool vacuum cleaner is an excellent solution that can save a decent amount of money. In our article we analyzed all the stages in detail. Of course, you can purchase a ready-made one. But is it worth spending so much?

A pool vacuum cleaner is an excellent invention for cleaning pool surfaces. Regardless of the quality of the installed inlet filter, plaque forms on the walls of the reservoir and at its bottom. In addition, dirt often gets into the pool in the form of leaves and dust, which, when deposited, creates an unpleasant layer on the surface. Such stains can be removed in many ways, but one of the best is a pool vacuum cleaner.

Pool cleaning methods

There are many ways to keep your pool clean. One of them is constant water replacement and refilling through special filters. In this case, the water will not have time to stagnate and pathogenic organisms will not be able to quickly develop in it. However, this method is very expensive, because the water will have to be changed at least 1-2 times a week... and there can be a lot of it.

Depending on the size of the pool, even if even a small frame is installed at the dacha, the amount of water can reach tens of cubic meters. Even an average pool with dimensions of 4x2 m and a depth of 1.2-1.5 m is already more than 10 cubic meters of liquid. Just calculate how huge the expense will be. But that is not all. Of course, with water from a pool that has been in it for only a few days, you can wash your car, irrigate trees, rinse even the façade of a house, or water all the beds in your garden. But how much water will it take? A cube or two? Where should the rest of the water go? Pour it down the drain?

It’s good if so, but often there is no central one. Then the water is drained into the nearest ditch, but this is fraught with many problems - from the development of harmful microorganisms there to the creation of a small swamp with frogs and snakes.

In general, this is not an option, unless you have a swimming pool at your dacha with only a cube or two, for example, an inflatable children's pool. Then, in principle, the question of cleaning it disappears. But we are talking about medium-sized structures, and therefore we need to look for the right way.

• You can use a distillation pump with filters, but you must understand that it only purifies water. That is, depending on the technology and equipment used, the water will be purified from microscopic impurities and organisms that can create a pathogenic environment;
• Can be used for chemicals, which will simply lead the water to a dead state. But again, you will only get rid of bacteria, but not of debris on the surface of the water and plaque on the walls of the pool;
• Using a special net will help collect leaves and pieces of paper from the surface, and a brush with a long handle will help remove some of the plaque from the waterline. But the rest of the dirt will simply settle and remain at the bottom.

As you can see, cleaning a pool that is filled with water is no longer as simple a task as it was previously thought when purchasing it. Here you need to use complex methods, one of which will be a vacuum cleaner.

What is a pool vacuum cleaner?

This equipment, if you don’t go into too much detail specifications, is a pump for distillation and purification of water with several filters. From the main pump unit there is a long hose with a handle and a brush, through which dirt and plaque are collected. By wiping the bottom and walls of the pool with a brush, bristles or the rubber base of the brush, you remove dirt from the surface, which, along with the water, goes into the hose and reaches the pump, where it is cleaned by passing through a filter or several filters. Depending on the power and general purpose of the vacuum cleaner, the filters inside it can even be changed several times during one cleaning, it all depends on the severity of the contamination.

The unit helps with cleaning sediment, as well as plaque that forms along the waterline.

Most often these are gray and yellow spots, or even a film that needs to be rubbed well so that it moves away from the walls and bottom of the pool.

If you work with the equipment correctly and systematically, it can serve you for quite a long time. In addition, each individual pool cleaning will take much less time.

How is the price of a pool vacuum cleaner determined?

You can buy such equipment without any problems. Today, vacuum cleaners are available from companies offering swimming pools and complete equipment for them, as well as from many wholesalers, online stores, and even in standard retail. But the price tag may vary significantly.

At first glance, you can pay several thousand rubles for a miniature unit, but will it do the job? On the other hand, is it worth purchasing powerful equipment and reproaching yourself for such serious waste for a long time? Probably, it is necessary to determine some alternative method with the help of which it will be possible to find a solution to the issue for minimal money.

Prices for the device can reach hundreds of thousands of rubles. For example, robotic vacuum cleaners that independently move along the bottom of the bowl and clean its surface. The same powerful machines from recognized pool manufacturers, recommended, but terribly expensive. Well, and other options, which often cost more than they should.

Alternative cleaning of a small country pool

We decided to continue the theme, starting from small pools for summer cottages. Let it be inflatable or frame pools, because most often these are the ones we have installed. Today we will skip capital and composite ones, since we are absolutely sure that when purchasing a pool for a million or two, no one will bother with a device for cleaning it. The complex system will be purchased on the first day of purchasing the pool.

Let's continue about small plastic, inflatable and frame bathtubs. They need to be washed and cleaned, because heated in the sun is an excellent environment for many disease-causing pathogens. So we get rid of them in several effective ways:

• Every day we cover the pool so that nothing unnecessary gets into it;
• We take procedures only correctly - after a shower, in special swimwear, do not forget to take off your slippers and do not allow animals, even the most beloved ones, into the water;
• We often collect debris from the surface of the water with a net or special plastic buckets;
• We use it, which will help cope with bacteria, algae and other negatives in the water;
• We change the water on time;
• And we definitely use cleaning and washing of the dry pool while it is out of water, as well as cleaning and washing with a special vacuum cleaner.

Yes, it will take time, but there is no way around it, especially if you want the procedures to be pleasant and not negatively affect your health.

Do-it-yourself vacuum cleaner for cleaning the pool

So that you don’t have to purchase expensive equipment, we will give you advice on how to make it yourself for pennies. You will only need to spend money on high-quality filters for the pump, as well as chemicals for pools.

We decided to bypass several models where the base is created independently. We don't need to think about the design of the pump, because we already have it. But we have thought through the cleaning system to the end.

It's really simple and we'll only need to combine the pump we already have with a few extra parts.

Vacuum cleaner brush

The brush is that part of the overall surface cleaning mechanism that will remove plaque from the walls of the pool. It can be used for daily cleaning if necessary, or for tougher dirt if you clean much less frequently.

The brush can be made with your own hands from different materials, or simply purchased at the store. This is far from the most expensive piece of equipment, and therefore everyone can afford the purchase.

If you want to make a brush yourself, there are several options:

• The first is that you simply connect a brush from a home vacuum cleaner to the water intake hose of the pump. Almost every modern household appliance comes with a brush that we don’t use. It has a very narrow slot, flat and small, for cleaning in corners and behind furniture. It can also be used for a swimming pool. But there is one drawback - it is really small, and due to this, cleaning time can seriously increase;
• Brush made of polypropylene pipe. You need to take a pipe, which is used for distributing water in the house, cut off only 20-30 cm from it and make a cut along the pipe only 3-5 mm wide. Next, cut the pipe in half and insert both pieces into a tee, which is also used for wiring in plumbing work. Naturally, you will have to use soldering here. Now, in the third hole of the tee, install another piece of a whole polypropylene pipe, which will become an adapter between our brush and the hose leading to the pump. And the first two pieces of pipe, which have a slot, need to be plugged at the edges; there are also special plugs for this. The brush is ready!
• The third type of homemade brush for a water vacuum cleaner is a modernized brush made from a plastic pipe. That is, we take a ready-made brush that we just created and add several auxiliary parts to it. This can be a rubber band from a regular car windshield wiper that is glued to a pipe with a slot. The rubber band will help remove dirt from the surface. Also, it can be a thin strip with bristles. Any addition can be glued or screwed to the pipe with small screws!

When creating a brush, you need to make all edges without sharp corners so as not to scratch or tear the surface of the pool. You also need to work only with high-quality glue and soldering for polypropylene pipes, so that with minimal force under water the brush does not fall apart. Please also note that the slot in the water intake pipe is offset, depending on the angle of the brush to the walls or bottom of the pool, and the rubber band or bristles that we installed on the brush for scraping off dirt should not get into the slot and interfere suck up dirt.

Connecting equipment

Now we need the homemade unit to work. To do this, it must be airtight, first of all.

We take a simple transparent corrugated hose, which in plumbing work is installed on siphons under sinks, and fix it to the place where water is taken from the pool. Usually it is already there, since through it the pump draws water from the distillation bowl.

Our hose can be connected quite simply, and there are several ways to do this. The first is to use a sewer adapter, choosing it exactly in size so that the elastic fits tightly to the water intake and also tightly grips the hose. And, secondly, use an ordinary plunger, in which you need to make a hole exactly in the middle, where you can install another piece of plastic pipe. Next, the plunger can be put on the water intake, and the vacuum cleaner will be ready to go!

Please note that it is much more convenient to work with rubber sewer adapters or other plumbing parts, since due to the large assortment it will be much easier for you to do right choice by size.

Another required detail is the handle. This could again be the same polypropylene pipe 1.5-2 meters long, which will be installed on the brush. With its help, you can set the entire cleaning mechanism in motion.

How a pool vacuum cleaner works (video)

Working with a homemade vacuum cleaner

When our equipment is ready, we install it and check its functionality after turning on the pump. If everything is normal and the water is sucked in, passes through the filter and is discharged back into the pool, we begin cleaning it.

It would be much more correct to start by cleaning the walls. It is advisable to immediately wash those parts that are above water, which can be done with a regular brush. Next, walk along the waterline and vertical walls in the water. And only after finishing cleaning the walls, you can move on to removing dirt from the bottom.

You will only need about an hour of time for an average pool to get it in order. Now the water will be clean and safe, of course, provided integrated approach, which we talked about earlier.

By spending just half a day purchasing everything you need, drawing up a drawing and the assembly itself, you will save a lot of money, and you will be able to clean your pool at any time. But if you have other thoughts about our homemade equipment, we'd love to hear them. Write to us in the comments to the article... we will be very grateful!

Happy owners of country pools know that this is not only a pleasant cooling bonus in the summer heat, but also a very capricious design that requires proper care.

Surface bottom And walls pool, as well as the water filling it, it is necessary regularly cleanse For these purposes, as well as to increase the service life of the equipment itself, its owners use underwater vacuum cleaner.

Remarkable the fact that a vacuum cleaner for cleaning a pool can not only be bought in a store, but also made with your own hands. This is a fun and easy process.

In this article we will talk about types underwater vacuum cleaners, their designs and operating principle. We will also give example making a vacuum cleaner for the pool with your own hands.

Types of underwater vacuum cleaners

According to their design, vacuum cleaners are three types:

• Manual;
• Automatic;
• Semi-automatic.

Handheld vacuum cleaners

Manual models are the most simple in operation and most profitable in terms of their cost devices. Purchasing such a vacuum cleaner will be a practical solution for caring for a country pool or an artificial reservoir with a small area.

Design handheld vacuum cleaner includes the following details:

• Metal telescopic rod;
• High power engine;
• Corrugated hose;
• Cable for connecting to the electrical network;
• Brush.

Remarkable that this device can be directly connected to a device that collects the top layer of pool water ( skimmer).

Choosing specific model of hand-held vacuum cleaners, all characteristics should be taken into account bowls swimming pool First of all - his depth, which must match the length telescopic device handles.

Note! Using various accessories - telescopic tubes and hoses, you can carry out complete cleaning of pools of various designs.

Semi-automatic vacuum cleaners

Semi-automatic models have more power, rather than manual ones, and differ from them in the number of their functions.

They work mainly on hydraulic traction, and their design allows you to adjust intensity water pressure, changing the flow rate if necessary.

Another submersible device used for water purification, including for a swimming pool, has a similar operating principle.

Semi-automatic designs are distinguished by the presence of a special trash bag and the ability to directly connect to the skimmer.

They good And comfortable for cleaning swimming pools with flat bottom, the surface of which has depressions.

Easy to wash the valve is also dignity semi-automatic vacuum cleaners. Thanks to the presence of this part, the surfaces of the pool, whether it is collapsible or stationary, are cleaned fast and effectively. Old sediment that has accumulated in a layer at the bottom of an artificial reservoir is also easily eliminated.

Automatic vacuum cleaners

Automatic models, more commonly referred to as robot vacuum cleaners, are recent engineering inventions.

Such a device is capable offline and work continuously for 8 hours, without any need for controlling person.

Latest computer technologies provide the ability to install certain software parameters operation of the device.

Control of such an autonomous mechanism is carried out via remote remote control.

How does a pool vacuum cleaner work?

This device is intended for cleansing surfaces of artificial reservoirs. The operating principles of each type of model are generally identical: contaminated water skipped through the built-in filter and then goes back into the pool.

Instructions for using a handheld vacuum cleaner

How to use semi-automatic and automatic models

Before you start using the vacuum cleaner, you should place into the water and connect hose with skimmer. Filtration pump will create pressure and, becoming a source of vibration, will help the device move along the surface of the pool.

Movements semi-automatic the devices are chaotic and do not have any clear, programmed scheme. It cleans not only the surface along which it moves, but also filters water.

Automatic vacuum cleaners perform the same functions as other types of models. Difference lies in the absence of the need to connect them to the water supply systems of the reservoir.

DIY water vacuum cleaner for the pool

In order to clean the pool, it is not necessary to purchase ready device. It won't be difficult to make it on one's own.

All that is required is the availability of certain materials and certain creative skills.

So, to create homemade underwater vacuum cleaner for you will be required:

• Corrugated hose;
• 1.2 m polypropylene pipes;
• Plugs;
• Plunger.

The width of the hose, pipe and rubber bands depends on diameter hose from which purified water flows.

Important! You should not skimp on the hose: the diameter of the pool should exceed its length by no more than 50 cm, otherwise the quality of cleaning the reservoir may suffer.

Let's move on to creating a vacuum cleaner:

You can use a purchased one as a nozzle. brush, or - plunger or fitting, in which you will first need to make several cuts. These cuts will prevent the device from tightly suctioning to the surface of the pool. But it is best to give preference to a brush. It will help you with the pool cleaning process. most effective, and will also significantly shorten its duration. A brush for ponds is especially relevant with backlight, which require more thorough cleaning, but at the same time delicate.

Note! If the vacuum cleaner pump is equipped with a paper filter, it should be removed before starting to clean the pool, because it will not be able to retain the smallest debris located at the bottom.

Prices for purchased pool vacuum cleaners

Price underwater vacuum cleaners varies over a fairly wide range and depends, among other things, on manufacturer.

Among manual models, budget products are Bestway(the most inexpensive models are up to 3 thousand rubles).

A little more expensive and, accordingly, more functional – vacuum cleaners Pool Blaster. However, this company has models whose price exceeds tens of thousands of rubles.

Aquabot- premium vacuum cleaners. Average price of devices - from 50 thousand rubles.

And, perhaps, an option that is an excellent example of the price-quality ratio - products Intex. The price of manual models of this company starts from 3.5 - 4 thousand rubles. The Intex automatic vacuum cleaner can be purchased for 6-7 thousand rubles.

Acquainted with photo And video specific models, and at the same time get an accurate idea of ​​their quality characteristics at official websites manufacturers.

Vacuum cleaner– a useful thing for the owner of a swimming pool or other artificial reservoir. It’s so nice to plunge into a clean, completely transparent water on a hot summer day, and in the evening - sit nearby, admiring its tints.

He talks about how to clean the bottom of a pool with a homemade vacuum cleaner. This Video:

Having your own pool is not only a source of joy, but also a complex structure that requires careful maintenance. Over time, the walls and bottom become covered with dirt or plaque, which is not so easy to clean. Some, in order not to complicate their lives by constantly purifying the water, decide to simply drain it. But this option is not suitable for large reservoirs. In addition, frequent draining of water can turn a beautiful summer cottage into a swamp. Therefore, for high-quality cleaning of the reservoir, an underwater vacuum cleaner was created.

Types of underwater vacuum cleaners

Why is it needed? Owners use different pool cleaning methods . Typically, permanent structures use a pump with filters, chemicals, or the pond is cleaned with a net. All these methods are good in their own way. But even when using several methods simultaneously, pollution of the reservoir can occur.

The filter purifies only the water itself, but it is not able to capture dirt that has settled to the bottom. The same goes for the net. It can catch leaves and other debris from the surface of the water, but it has difficulty reaching the bottom. And chemicals prevent the development of algae or bacteria, but do not in any way contribute to the disappearance of the remains of their vital activity. This is why a vacuum cleaner is essential.

They can be divided into three types: manual, semi-automatic, automatic.

Handheld vacuum cleaners

These are the simplest models. They are the cheapest and do not require special skills to use. However, if the reservoir is large, such a device may not be enough.

It consists of: a metal pipe, a motor, a hose, and a brush. It can be connected to a skimmer, which will purify the captured water.

The model should be selected taking into account the depth of the reservoir. If it is deep, make sure that the length of the metal pipe will allow you to reach the bottom.

Semi-automatic vacuum cleaners

Semi-automatic and automatic models can be used to clean a large deep pool. They have good power. The pump creates pressure and vibrations that move the device along the bottom. There are models that create a vacuum. They operate on hydraulic traction. Semi-automatic devices are good at capturing large debris, but may miss smaller ones.

Automatic vacuum cleaners

Fully automatic devices are also called robots. Their advantage is that no control is required, they work themselves. The robots move slowly over all surfaces of the pool, capturing any dirt. They do not need to be connected to a skimmer as they clean themselves and then return the water. They clean reservoirs of all shapes and sizes well. You can control and configure the robot using the remote control.

How does a pool vacuum cleaner work?

What he really is? This is a hose with a holder and a brush at the other end. The brush thoroughly removes plaque or dirt that is sucked into the water hose. The device passes contaminated water through several filters. After that, she returns to the pond. Usually, to clean the walls of the pool, you need to drain all the water and remove dirt mechanically. This turns into a complex and lengthy procedure. Using a vacuum cleaner, private ponds can be cleaned at any time, without prior preparation. Depending on the degree of contamination of the reservoir, cleaning of special filter cartridges is required.

Instructions for using a handheld vacuum cleaner

For quality cleaning you need:

• connect the hose on one side to the brush, and on the other connect to the skimmer. It must be turned on all the time while cleaning is being carried out;
• clean the walls and bottom with a brush;
• After use, clean the filter plates in the skimmer.

How to use semi-automatic and automatic models

Initially, the sequence of actions is similar to using a manual model: the hose must be connected to the skimmer, and the device itself must be installed at the bottom of the pool. Next, the machine should be turned on, and it will handle all the work itself. The vibrations will move the device throughout the pond. However, remember that these movements have no sequence or logic. The device can clean the same place several times, without paying any attention to other parts of the reservoir. Therefore, its work needs to be monitored and moved to those areas that were missed.

DIY water vacuum cleaner for the pool

You can create a water vacuum cleaner for the pool with your own hands. However, this only applies to the manual model.

To make a homemade pool vacuum cleaner you will need:

• corrugated hose;
• brush;
• plunger;
• plumbing fitting;
• polypropylene pipe;
• plugs;
• tee.

Step by step creation:

• We take a brush. To do this, you can use the attachment for a home vacuum cleaner, which is not used. It is better to choose the one that is larger, otherwise the cleaning process can become very long;
• If you don't want to bother with a small brush, or simply don't have the right one, you can make one yourself. To do this, take a polypropylene pipe, cut off a piece of 25-35 cm. Next, cut the pipe in half and make a 4 millimeter slot. We insert the halves into the plumbing tee and close the edges with plugs. In the third entrance we insert a pipe that will be attached to the hose. The homemade brush is ready;
• To increase the effectiveness of our device, you can glue gum onto the tubes, for example from old windshield wipers, or from brushes to clean glass. This rubber insert will be much better at collecting all plaque and dirt;
• Connect the corrugated hose. To ensure tightness, take a plunger and cut a hole in the middle. We insert a pipe into it and put on a water intake. A fitting can be used instead;
• Let's make a holder. We connect a pipe to the brush, which will serve as a handle.

Now let's start checking. We connect the second part of the corrugation to the skimmer, and then try to clean our pond. If the pool vacuum cleaner works properly, the water is captured well and there are no leaks, then you can begin full-fledged work.

Prices for purchased pool vacuum cleaners

Today, it is not difficult to buy ready-made underwater equipment. Swimming pool companies have a good range of different models.

You need to choose a model taking into account the parameters of your pool and financial capabilities, since you can find vacuum cleaners costing several hundred thousand rubles. Will small hand-held models of low cost cope? Do I need to purchase an expensive automated device for an average frame pond? The optimal solution is the golden mean between very cheap and very expensive.

In stores you can find equipment from the following manufacturers:

• Bestway – wide selection of different models according to low prices with different possibilities. The most inexpensive hand-held models cost about 3 thousand rubles, and are of fairly good quality;
• Pool Blaster will cost a little more, but have a greater range of functionality;
• The company has been on the market for many years and has earned itself a good reputation. At the same time, their product prices are very affordable. Manual models cost about 3-4 thousand, semi-automatic 6-7 thousand;
• Pontoon - produces swimming pool equipment that has proven itself with the best side. Convenient to maintain single-level reservoirs;
• Dolphin – multifunctional models with built-in scanners and filters. They belong to professional equipment, so you can find devices costing 900 thousand rubles;
• Water Tech – American made equipment. The average price is about 20-30 thousand rubles;
• Bridge is an inexpensive but high-quality manufacturer. Prices start from 3 thousand rubles;
• Aquabot is high-quality equipment with a wide range of functionality. Premium class, average price about 50 thousand rubles;

It is better to choose not only the most convenient model for you, but also make sure that there are service centers of this manufacturer in your city. Although good producers They care about the quality of their products, but defects or malfunctions still occur.

When using this cleaning technique, it is worth remembering some safety rules:

• there should be no people in the reservoir;
• when connecting to the network, follow all the requirements specified in the instructions;
• If the cable is damaged in any place, such a device cannot be used. You need to take it to a specialist for repair.

If you are the happy owner of a swimming pool, then you, like no one else, know what a “pleasant” feeling it is to clean it. Whatever one may say, such work has to be done regularly. And we are talking not only about cleaning the water in the pool, but also about cleaning the walls and bottom of the structure. This is a painstaking task that not everyone can handle. There are many improvised means that people use to clean swimming pools. But they are all primitive and require time and effort. There is one tool that will help speed up cleaning work and reduce energy costs. If a broom is used to clean the house, then a vacuum cleaner was invented as an alternative. With it, the work is done more thoroughly, easier and faster. You will be surprised, but there is also a vacuum cleaner for the pool. This is a convenient unit that will simplify your life.

In this article we will discuss the types of vacuum cleaners for swimming pools, find out their advantages, and compare some models. And for those who do not want to buy expensive equipment, we have prepared instructions that will help you create a vacuum cleaner for your pool with your own hands.

Why is it recommended to use a pool vacuum cleaner?

You may have this question, because before you successfully did everything with a mop, nets and other hand tools. Why should you switch to such a unit? There are several reasons that we will look at. First, I would like to draw attention to the operating principle of such a vacuum cleaner. Its task is to suck in contaminated water, pass it through a filter, and then, in purified form, throw it back into the pool.

Thanks to this, you can save your energy and time, which is now quite difficult to allocate. Here are the main advantages of using such water vacuum cleaners:

• there is no need to regularly replace fluid in the pool;
• a huge range of products: performance, power, type, brand;
• ease of cleaning of any surfaces of the pool: bottom, steps, walls;
• Caring for the pond is simplified several times. It’s easy to do all the work yourself without spending money on hiring professionals. At the same time, time costs are reduced;
• The pool bowl is cleaned thoroughly and carefully. You will not be able to damage the surface of the tile and shorten its service life.

As you can see, there are many advantages. Therefore, if you are the happy owner of a swimming pool, then you simply need a water vacuum cleaner. Just analyze how often you clean your pool and how this prospect makes you feel. With a vacuum cleaner, the task becomes easier, and the process becomes even more fun. It is noteworthy that you can find several types of products on the market. What are they? Let's find out.

Water Vacuum Cleaner Options

Due to the fact that manufacturers prepare several model ranges of equipment, you have the opportunity to purchase the option that will be appropriate in your case. Choices have always attracted consumers. Which one is this the lineup? You can buy the following models:

Already from the name it becomes clear how to work with one or another type of vacuum cleaner. They have their own characteristics and are used in certain cases. For example, handmade products are the most affordable and simple. This is an ideal option when it comes to cleaning an inflatable or frame small pool. The products are supplied with two attachments: a brush, which can be used to clean different areas of silt and dirt, and a mesh net, which collects large debris from the surface of the water. The device has a bag or compartment into which all the dirt, silt and other debris falls. And passing through the filter, the water is purified and returned back to the reservoir. All that remains is to remove the garbage from the bag.

Note! Handmade products - budget options, which will be affordable for everyone. Their advantage is that they do a great job, are safe, reduce cleaning time and save you energy. The downside is that it can only clean a small tank.

If we talk about the operating principle of a semi-automatic water vacuum cleaner, then it is a little different. It needs to be immersed in water by connecting a water hose to a skimmer (garbage collector). The pump with the filter begins to create pressure and vibration, due to which the vacuum cleaner begins to move chaotically along the surface of the pool (along the bottom). Vacuum products operate by hydraulic traction and are quite powerful. In this video you will see exactly how they function.

As for robotic vacuum cleaners, they are the most expensive, but the most profitable. They can be called a technological breakthrough. The device will perform cleaning on its own, without your participation. Just launch it. There is a remote control for this. This is an ideal option for any pool, even the largest. Such a personal assistant will do all the cleaning work for you, without any problems. But you can’t make such a vacuum cleaner for a pool with your own hands.

Review of popular vacuum cleaner models

There is probably not a single person who has not heard of the Intex company. For many years they have been producing various products related to swimming: swimming pools, mattresses, swimming paraphernalia, etc. Not without water vacuum cleaners. They are considered top sellers, we are talking about both quality and cost. If you don't want to make a manual pool vacuum cleaner yourself, you can purchase one. Which models should you pay attention to?

We have selected two models for you that are this moment the most popular and in demand:

You can easily buy them in a specialized store. What is the difference between water vacuum cleaners and what are their advantages?

If we talk about the first option, then this is a semi-automatic vacuum cleaner that effectively copes with cleaning large pools. It is used for above ground tanks. The advantage of a vacuum cleaner is that you do not need to monitor its operation or walk near the brush. Just turn it on and watch the process. When hitting the sides, it will not stop in one place, but will automatically change its path. In order for the unit to operate at 100% efficiency, you need to use a pump with a capacity of more than 6 m 3 / h. The work is completely autonomous. The cost of a water vacuum cleaner is about 5 thousand rubles.

"Intex 58947" is a manual vacuum cleaner that is quite practical and inexpensive. When purchasing a model, you not only have a vacuum cleaner, but also the following set of elements:

• brush;
• hose;
• net;
• long rod 2.8 m.

All this can be put together quite quickly, and the vacuum cleaner copes with its task quite effectively. Thanks to the net, you can easily collect all the debris from the surface of the water. But, as for cleaning the walls, steps and bottom, you will have to work a little with your own hands. Operation of the equipment is simple and comes down to the same manipulations as with a vacuum cleaner for an apartment. The cost of production is about 3 thousand rubles.

Customer Reviews

So that you can fully evaluate the products, we suggest that you consider the reviews of those who have already tried the units in action.

Nikolay, Novosibirsk: “Several years ago I built myself a swimming pool, 60 m2. Although the pool has a built-in skimmer, which perfectly cleans the water, the walls and bottom become covered with silt and dirt over time. The Intex 28001 (58948) vacuum cleaner does an excellent job with them. It has been working perfectly for 3 years. There are no complaints about the work."

Irina, Moscow: “My husband and I decided to make a small pool at our dacha. The kids absolutely love it, but we have to clean it regularly, which isn't very pleasant. On the advice of a consultant, we purchased an Intex semi-automatic, I don’t remember the model. It’s just a miracle that has made our life easier.”

Victor, Yekaterinburg: “I have a whole complex of swimming pools in the city that need to be cleaned regularly. That's why I use the Intex 28001 vacuum cleaner. The model is practical, compact and efficient. With it, work is done quickly, efficiently and effortlessly. It is important to me that clients do not complain about garbage and dirt. So far there have been no complaints, which means that the equipment copes with the task 100%.”

Svetlana, St. Petersburg: “My parents have a small pool in their dacha. It is inflatable and is actively used every summer. To make cleaning it easier, we gave them "Intex 58947". They are happy because it works

As you can see, these models are really good and perform their tasks without question. For this price, these options are simply ideal. But what if you cannot afford to purchase such equipment? If you have some construction skills and time, you can build the equipment yourself.

DIY pool vacuum cleaner

Don't be afraid, even if you haven't done this kind of work. Thanks to detailed instructions, you will cope with the task. There is no need to spend several days. To ensure everything works out for you, immediately prepare the following materials:

• polypropylene pipe;
• corrugated hose;
• a brush or something else as an intake nozzle;
• sealing rubber bands.

All this can be bought at a plumbing store. Please note that the following creation process is based on the fact that you have a regular pump. As for the choice of hose diameter, work and rubber seal, it all depends on the size of the pipe through which filtered water is supplied.

Making a brush for a vacuum cleaner

There are several ways to make an intake nozzle. We will look at them, and you can choose the best one for yourself.

Note! To prevent the edges of the tube from scratching the pool, it is better to treat them with sandpaper or a file. Otherwise, the surface may be damaged. This will be disastrous for inflatable products.

Connecting the vacuum cleaner

When the brush is ready, you can start connecting it. To make everything work top level, you need to adhere to the basic rule - tightness.

You will need a corrugated hose, which is sold for siphons under sinks and sinks. It must be fixed at the point where water is drawn from the tank. It should be connected using an adapter for sewerage of the same size. As for the sealing rubber, it is important that it tightly grips the hose and adheres to the water intake.

A mandatory part of a water vacuum cleaner is the handle. To make it, you can use a plastic tube, the length of which is approximately two meters. It all depends on the size of the pool and your height. That's it, you've made a vacuum cleaner frame pool. It can be used to clean inflatable, frame, and small plastic pools. And to reduce the excess consumption of liquid, you can pass it through a filter and return it to the reservoir.

Conclusion

If you are tired of manually cleaning your pool, then you can resort to using a vacuum cleaner to make the task easier for you. You have the opportunity to either buy it or make it yourself. Whatever option you choose, you can be sure that such an invention will not be superfluous. And if you are interested in a robotic pool vacuum cleaner, you can see the principle of its operation and its operating features from this video.