Bottle fishing trap. A simple way to catch fish with a plastic bottle. Traps save time and effort

The best survival experts can make the most of all the resources at their disposal. These include a variety of human waste that you can likely find in almost any part of the planet.

This morning, while exploring the river bed, I came across a pile of garbage in the coastal thickets. Among other garbage, there were also quite useful things that immediately attracted my attention and will be discussed in detail in this article. We will talk about plastic bottles and how to use them.

WHAT ONE IS TRASH, OTHER IS WEALTH

Unfortunately, life in the modern world is literally shrouded in a layer of plastic. There are no places left on Earth that are guaranteed to be free from such garbage. Some parts of the ocean have been found to contain thousands of plastic debris per square mile, and I suspect the same is true on land.

Our rivers and lakes, roadsides, even dense forests and deserts are filled with an absurd amount of polymer waste, which indicates the urgent need to take global measures to protect the environment on a planet-wide scale - this is the only way humanity can survive.

But for the seasoned prepper, plastic trash has a wide range of uses and could very well save a life. As you can see in the picture, I found a couple of empty two-liter bottles that, following downstream, became entangled in the alder thickets. In a real survival situation, such a find is worth its weight in gold!

But what to do with them?

PRACTICAL APPLICATION IN EXTREME SURVIVAL SITUATIONS

Surely you already know that water is one of the most important resources during survival. You can live without food for more than two weeks, and without water for several days. Even a daily lack of water in the body can lead to very serious consequences. Considering the above, using plastic bottles as water storage containers may be the smartest solution.

In addition (especially in southern latitudes), plastic bottles can be used to purify water from pathogens using sunlight (Solar Water Disinfection, abbreviated SODIS - in English terminology). This may come in handy if it is not possible to boil water over a fire.

To make water drinkable you only need two readily available materials - a clear plastic PET bottle (green and brown bottles will not be effective) and sunlight. Try to find a bottle with as few scratches as possible. this can make it difficult for the sun's rays to penetrate, and disease-causing organisms can find shelter there. Rinse the bottle thoroughly and remove any dirt or chemical residue. Fill the bottle with water and leave it in the sun. The procedure can last from six hours to two days. During this time, ultraviolet radiation and rising water temperatures will destroy almost all bacteria. If the water temperature exceeds 50 degrees Celsius, disinfection will occur three times faster.

However, I plan to stay at this place for a while. There is a large amount of fresh water from the stream and, in addition, such wetlands with beaver lodges are excellent sources of a variety of food for survival.

With a fire, shelter and water provided, I could focus my efforts on foraging for food from the abundance of local plants and animals, and plastic bottles can be a huge help in achieving this goal.

TRAPS SAVE TIME AND EFFORT

The superiority of traps over active hunting or fishing is that once set, the trap will operate twenty-four hours a day, seven days a week; even when you are sleeping. This saving of time and effort is an obvious advantage in the situation extreme survival. Properly placed traps can protect you from hunger in case of unsuccessful hunting or fishing, and even become a constant source of food for a long time.

The process of making a good trap takes some time and requires quite a lot of effort. For example, to make one of the most common fish traps using only natural materials, you need to find and collect suitable rods, weave rope and have the appropriate skills to implement a smart trap from all this material.

Thanks to plastic bottles, most of the work of making traps is already done for you!

HOW TO MAKE A TRAP FOR SMALL FISH FROM PLASTIC BOTTLES

Although I used both bottles to make the trap, you can make a working trap using just one of them. Several bottles allow you to conveniently remove caught fish. Soon you will understand everything...

First separate top part bottle where it meets the cone and remove the cap. I used the scissors of the Leatherman Wave multitool, but any suitable tool on hand will do: yours, a sharp stone, glass shards, etc. Similarly separate bottom part(bottom) of another bottle.

Then, neck down, place the smaller section into the larger section of another bottle with a cap. Using an awl, make holes along the outer edge at intervals of 2-3 cm, as shown in the figure. Instead of an awl, you can use a hard, sharp stick or a piece of heated metal to melt the plastic.

Now you need a way to securely join two pieces of plastic bottles together. For this I decided to use 550 paracord, which is always present in my emergency kit. Natural fibers can be used instead fishing line, shoelaces or part of your clothing.

Paracord, parachute line, cord (English paracord or 550 cord) - light nylon braided (English kernmantle rope) rope, which was originally used as slings American parachutes During the Second World War. However, in the field, paratroopers found many useful uses for such a rope. Currently, paracord is used as a universal device by both military personnel and civilians. This universal cord was even used by astronauts during the second Space Shuttle mission to repair the Hubble Space Telescope.

Kernmantle rope- a modern rope with a load-bearing core of bundles of continuous nylon fibers surrounded by a woven protective layer.

550 paracord consists of 7 strong strands in a protective sheath. This is such a versatile tool that I highly recommend carrying at least a 50-foot skein with you at all times. To easily remove one strand, simply tie it to a tree branch and pull it towards you, as shown in the picture.

Pass the string through the holes made in the plastic bottles so that both parts of the bottle fit securely against each other. Leave the end of the paracord long enough to tie the trap to brush or rock along the shoreline.

With a little effort, you will have a compact plastic device for effective fishing small fish(up to 7-8 cm in length). Try to place the device in narrow areas of the river flow - on the natural path of fish movement. If the entrance to the trap is properly surrounded with natural materials (stones, branches, sand, algae), then the fish will get inside faster and more willingly.

In the picture (below) you can see a couple of sad fish caught after just a few hours of waiting. If you slightly increase the number of traps (up to 3-5 pieces or more) and leave them for the whole day, then you can quite count on additional source energy (rich in proteins and amino acids) to maintain strength and morale over a long period of time.

To remove fish from the trap, just unscrew the lid of the main section so that the catch can easily fall out. Replace the lid and the trap is ready to use again! That's what two bottles were for!

The caught fish can be used to hunt larger ones or as bait for scavengers such as raccoons. And of course, even small fish will be excellent food for survival. In any case, I am of the opinion that one fish in hand is better than two in the river.

APPRECIATE NATURE'S GENEROSITY

• Check traps at least once a day
• If the trap is no longer needed, be sure to remove it from the river so as not to pollute the environment or harm its inhabitants.
• If you are just practicing survival skills, then always release the fish into the wild.

Anyone can make a trap out of plastic bottles. And who knows, maybe someday it will save your life...

P.S. For 13 days, two men ate almost nothing but fry, which they caught, among other things, using similar small fish from plastic bottles.

The method of catching fish with a plastic bottle will not require a lot of effort and time from you to make a simple fishing tackle.
With such a trap you can catch fish in almost all regions and in all continents where there is a river with fish.
All you need is a plastic bottle, hot glue gun, soldering iron, knife, fishing line or rope.
Take a five liter plastic bottle.

Cut off the top part.

Small bottle fish trap for fry

An excellent and non-standard version of the top, muzzle, hem (as they call it) - a do-it-yourself fish trap.

It seems to be the simplest, but with some changes from those made from plastic bottles.

You will always catch live bait with such a homemade fishing device.

Making your own muzzle trap from PVC bottles for catching fish (live bait)

You will need a couple of 5 liter plastic bottles. They also sell water in the store.

Cut off 1/4 of the distance from the neck of the first bottle. It turns out 2 parts. We cut off the neck of the short part completely (this will allow larger bait fish to pass through).

We cut off the bottom of the second bottle completely, leaving the neck with a lid - we get a through plastic tunnel with a lid.

Now let's connect the long part of the first one to the tunnel. We make it in a circle, where the bottles are connected by holes with a soldering iron. And then we tie and stitch with fishing line.

We turn the short part of the first bottle down with its bottleneck and insert it into our resulting structure.

Using a soldering iron, we make holes in the connection of the funnel and the tunnel next to each other and tighten them with fishing line.

We repeat (making holes and pulling the fishing line together) on all four sides.

We make a lot of holes throughout the form so that water can pass through and tie a good handle to the beginning of the funnel.

Here you go homemade trap for fish with your own hands from improvised means.

The video is below to make it clearer.

Homemade fish trap made from PVC bottles – Video

You can find a plastic bottle in every home. For some it is nothing more than trash, but for others it is a useful item. Everyone can find a special use for it. Various fakes are made from them for children: bird feeders and flower stands. From plastic bottle You can make a lot of useful little things, it just takes a little time, patience and creativity.

Even fishermen have found a use for it. Some designs that have been tested in practice are readily shared in this article.

Plastic bottle while fishing

Fishing requires a huge number of special devices, which, by the way, are quite expensive. Therefore, a 1.5 - 2 liter bottle will help you save significantly.

Bottle - anchor

If you plan to go fishing on a boat, you will definitely need an anchor, and sometimes two, to keep the boat stationary. In such cases, one anchor is installed on the bow of the boat and, accordingly, the second is installed on the opposite one. If there is a problem with the anchors, then a plastic bottle will come to the rescue. In a few minutes you can make a fake from it that will serve as an anchor.

To do this: we make two holes in the lid, thread a thick rope or thick wire, make a loop, and fasten it with a knot from the outside. Fill the bottle with sand, small pebbles, and you can add water. Screw the cap onto the bottle. We tie a rope of the required length to the loop. ready.

Tackle - trap

The next invention is a fish trap. Fishermen have been using this kind of gear since ancient times. You can lure small fish into such a device, which are useful when catching larger specimens with live bait. It’s easy to make: cut off the neck approximately half the length of the bottle, get a funnel, turn it over and install it in the body so that the neck coincides with the middle of the bottom of the bottle. We tightly connect the resulting parts. To do this, you can use a soldering iron or, if you are already outdoors, carefully walk along the edge with a hot coal.

You need to pierce small holes along the entire length of the bottle to allow water to drain. We make 2 holes along the edges to fix the handle; it can be made from any available rope. We pass it through the holes and secure it with knots. Inside we place some sand for weight and bait. Having noticed the delicacy, the fry will penetrate inside through the neck.

Feeder made from a plastic bottle for fishing

It’s not a fancy fishing exhibit, but it’s a very necessary one – a feeder. There are several ways to make it from a plastic bottle.

First: “The lid is a feeder.” You will need a lid, a lead washer for the sinker, a carabiner, several hooks and fishing line. We make a hole in the center of the lid and thread the fishing line, tightening the loop on both sides, put a sinker on the outer one, and hooks on the inner one. We fix the weight at the bottom of the lid. This device will serve as a weighting agent and a feeder at the same time. On inner part We lay out the bait, under which the hooks are hidden. We cast and wait for a bite. Such a feeder will be useful when fishing for bream, carp, and roach. Corn, dough, pasta or maggots are perfect for bait.

The second manufacturing method is as follows: cut off the bottom and neck of the bottle. We cut the resulting cylinder crosswise and mark the location of the feeders with a marker. Cut holes according to the marks. We fold the cylinder, secure the edges, you can use a soldering iron for this. According to the dimensions of the resulting structure, we bend the lead plate at the bend and tighten the fastening unit. The feeder is ready.

Fishing is one of the simplest and most effective ways not to go hungry. People have been fishing for a long time. Today, when technology has stepped far forward, we should not forget about the “primitive” but proven methods of fishing. After all, you never know what situation you will find yourself in.

An ordinary plastic bottle can be used as a material for making simple, but quite effective fishing gear. The resulting trap can be used in any corner of our planet where there are rivers. To implement the project, you will need to get hold of a plastic bottle (two pieces), a hot glue gun, fishing line or rope, and a knife.

It is best to use a five-liter transparent bottle as a basis. First, cut off the top part of it. We turn the cut top over and insert it into the base with the reverse side, after unscrewing the lid. Fix the resulting structure with hot glue. You can also use a stationery stapler.

Now you need to make 6-8 holes on each side of the base of the trap. To do this, you can use a soldering iron or a nail heated on a fire. The diameter of the hole is 0.5-1 cm. They are needed in order to pass a current of water through the bottle. Otherwise, the trap may be carried away.

Now we take the second bottle and cut off its neck and cap. We apply it to the base of the trap, draw a circle and cut out the resulting hole with a knife, after which we insert our neck with a stopper into it and fix everything with glue. This opening hole will be used to retrieve the catch and place the bait.

Now all that remains is to attach a fishing line or rope to the structure. The trap is ready for use: put the bait and throw it into the water for 15-30 minutes. Remember that the size of the container directly determines the size of fish such a trap can catch.

Here's a couple of videos:

Are you interested? active recreation? Not long ago, which could be the perfect choice for those who prefer a truly hardcore outdoor experience.