PVC boats made in Russia. How to start an inflatable boat production. Materials used in the manufacture of Russian-made inflatable boats

Russian boat manufacturers 60 domestic factories. Large brands and new brands of motor boats RIB, aluminum, PVC, fiberglass, yachts, boats, inflatable rubber, etc. Catalog 2020: official websites, addresses, contacts and prices of manufacturers and suppliers. Become a dealer, order a price list!

Manufacturers of inflatable and rigid frame boats, when designing and manufacturing their products, strive to take into account extensive natural and climatic conditions, possible conditions of reservoirs, and the operational requirements of numerous fishermen and hunters.

Software for designing sketches and final drawings, automated cutting, manufacturing of component parts and assemblies on high-precision CNC machines allow factories to produce small vessels close to European quality standards.

For the production of inflatable boats (and parts) domestic factories use:

rubberized fabric. Low price of the product, but weak strength. The downside of the material is molding if storage rules are not followed, which characterizes the lowest-cost version of the floating craft.
reinforced five-layer PVC fabric. Thermoplastic polymer "PolyVinyl Chloride" is obtained from petroleum and table salt. Reinforcing cord made of lavsan (polyester) provides strength and resistance to penetrating cuts and punctures. The outer polymer layer is waterproof, not destroyed by ultraviolet radiation, and resistant to salt water and fuels and lubricants. The seams can be easily and reliably welded with hot air or glued together with polymer adhesives.
Hypolon. Airtight polymer material. Does not require pumping for 6 - 10 weeks. Stronger and more durable than PVC. The impossibility of air welding of seams requires additional special equipment.
polyurethane. Material for boats used in extreme conditions. Durable, plastic, reliably reinforced, easy to glue due to sufficient porosity, and resistant to abrasion.

In the manufacture of rigid-hull boats, polymer fiberglass mixtures are used, different kinds plywood, rolled aluminum alloy AMg5M. The good ductility of the alloy for pressing and cold stamping, strength, lightness, reliable weldability, and corrosion resistance have ensured the widespread use of the alloy in shipbuilding with the title “marine”.

Buy boats Russian production Wholesale is possible directly from manufacturers, without intermediary trade markups. Regional dealers, don’t miss the chance for fruitful cooperation!

Buy Russian boats at prices without intermediaries, become a dealer of the small boat plant in the region!

* The calculations use average data for Russia

Organizing your own boat production requires a relatively large start-up capital (according to some sources, from 3-5 million rubles) and, no less important, extensive knowledge and experience in this field. Manufacturing such products is a complex process that takes a lot of time. The development of one model can take several months, including design, sample production and testing.

Inflatable boats are used by hunters, tourists and just vacationers. They are relatively reliable, compact, easy to operate and inexpensive.

There are several well-known Russian manufacturers that specialize in the production of such products: Ufa plant, Yaroslavl plant, PFK Mnev and K LLC, Leader, TD Fregat LLC, TPS Center Mnev, Rotan, Mobile Group", "Solar"; joint ventures: Badger (St. Petersburg – South Korea), Korsar (Moscow/St. Petersburg - South Korea), Petroset (official representative of Yamaha in Russia). Among Western manufacturing companies whose products are actively promoted on the Russian market are Zodiak, QuickSilver, Suzuki Marine, Honda.

Earn up to
200,000 rub. per month while having fun!

Trend 2020. Intellectual business in the field of entertainment. Minimum investment. No additional deductions or payments. Turnkey training.

Inflatable boats are either rowing or motorized. The difference lies in their design. The first ones are quite simple and cheap. Their sides are usually divided into several compartments, which gives them greater safety: even if one compartment is damaged, the boat will not sink. The bottom (payola) of the boat can be semi-rigid or rigid. In the first case, plastic or plywood is inserted into it, and in the second case, it is reinforced entirely with plywood or a light alloy plate. In addition, sometimes, to give the hull greater rigidity, it is equipped with a hard bench, which is installed between the sides. In addition to it or instead of it, inflatable cushions are also used as seats.

Models with an outboard engine are noticeably different in design from boats of the first type. The nature of the differences depends on the power of the installed engine and the operating conditions of a particular model. The main difference between these boats and rowing boats is the presence of a rigid transom on which the engine is mounted, and more durable elements for attaching it to the hull.

Boats with a small engine up to 2-3 Horse power have either inflatable bottom, or reinforced with transverse slats. They, like regular inflatable boats, easily fit when folded into a bag for transportation. Boats with a more powerful motor are equipped with rigid floors.

Inflatable boat production technology

Several basic materials are used in the production of inflatable boats: reinforced and non-reinforced PVC materials, rubberized fabric, polyurethane, hipalon and neoprene. All these materials differ in properties and operating conditions. Most domestically produced boats and cylinders for them are made of reinforced PVC. This material consists of several layers. It is based on a synthetic woven fabric, which is coated on both sides with several layers of PVC. Since polyvinyl chloride in its pure form is a non-plastic substance, polyurethane is added to it during production. There are such types of PVC fabrics as fabric, special for boats and construction. The special “boat” material PVC has several advantages. It is resistant to stains, abrasion and UV radiation. It is quite easy to repair if the boat suddenly leaks. The only negative: this material does not lend itself well to local staining. It can only be painted completely and only at the production stage: special dyes are added to polyvinyl chloride.

The second most popular material in our country that is used for the production of boats is rubberized fabric. Its main advantage is low price. Unfortunately, among the shortcomings, experts note low resistance to fading, abrasion, susceptibility to rotting, etc.

Boats made of unreinforced polyvinyl chloride are produced mainly by Western companies. They are inexpensive, lightweight, and easy to use. The disadvantages include the ability of this material to stretch when exposed to high temperatures, poor elasticity at low temperatures and low strength. It is also worth noting that if in the production of conventional inflatable boats the technology of gluing seams is used, then when producing models from unreinforced PVC, the seams of the boat are glued, which increases its reliability.

Ready ideas for your business

Hipalon and neoprene are relatively new materials, but they are already actively used in the production of sports equipment, including wetsuits, boats, etc. They are also multi-layered and made from synthetic fabric. But unlike PVC, the first woven layer is covered first with a layer of neoprene, and on top of layers of hipalon. This technology is expensive, so it is not used by domestic companies. In addition, the specificity of the raw materials used does not allow welding of such material, which further increases the cost of the finished product. However, boats made from this material are of high quality and have a long service life.

Inflatable boats are also made from polyurethane itself - the same one that is added to polyvinyl chloride to increase the plasticity of the latter. This material is highly porous, so it easily sticks to the fabric base. Boats made of this material are ideal for use in extreme conditions.

Russian fishermen have appreciated domestic inflatable boats, and they are in constant demand. Several domestic manufacturers compete with each other in the quality, reliability and comfort of boats.

Yaroslavl and Ufa plants

The factories of JSC Yaroslavl-Rezinotekhnika and JSC UZEMIK produce a total of about 70 models of PVC boats.

Of these, the most popular models are:

Ibis 20

Boat with a carrying capacity of 500 kg and dimensions of 3600x1650 mm. The bottom is made of lattice slate. Has two hard seats. The boat is equipped with dismountable duralumin oars and a pump. Three independent air compartments. Recommended motor power is 20 hp. IN model range eight boats with motors of 3, 5, 8, 6, 10, 15, 20, 25 hp. Price $640.

Boat with an inflatable keel 310 cm long and a carrying capacity of 375 kg. On the bottom there is a rigid sheet of laminated marine plywood. Designed for use with a motor with a maximum power of 10 HP. With. The line includes 4 models for engines with power of 6, 8, 10, 20 hp. With. The boat hull is equipped with a fender. The boat is packed in two cases and equipped with two hard seats, collapsible duralumin oars,. The price of the boat is $525.

ML-2

The smallest PVC motor boat produced by the Ufa plant OJSC "UZEMIK" with a length of 250 cm and a carrying capacity of 300 kg. The permissible maximum engine power is 8 liters. With. The boat itself assembled form weighs 42 kg. The bottom is made of collapsible hard slate. Three independent air compartments. Price $236.

Karaidel-44

A boat with an inflatable keel with a carrying capacity of 400 kg and a length of 360 cm. It has three independent cylinders, except for the keel. The watercraft is designed for an engine with a power of up to 12 hp. With. The boat weighs 75 kg. Price $640.

Manufacturer Mnev and K

The legendary inflatable boat with welded seams and an inflatable keel weighs 46 kg and is 3 meters long. The bottom is made of hard flooring. Designed for use with engines with a maximum power of up to 8 hp. With. Load capacity 370 kg. Made from multilayer PVC with a density of 850 g/m². It has four independent compartments that form a spacious cockpit. Equipped with oars, payolas, pump, two cans, stringers, trunks. Additionally, it can be equipped with an awning tent. The line includes 7 models with lengths from 2.75 m to 4.0 m. Price $565.

A model from a series of heavy boats, of which there are four varieties in the line, ranging from 4.2 m to 5 m in length with a carrying capacity of 820 kg to 1 ton. Recommended, and also the maximum engine power, is 35 hp. With. Has four independent cylinders and an inflatable keel. The boat is designed for long and comfortable trips and even for transporting heavy loads and horse-drawn animals. Five independent air compartments. The bottom is made of hard flooring. Boat weight 100 kg. The boat can be equipped with a console and a tent. Price $1165.

Manufacturer Leader

A small-sized boat made of five-layer PVC with a length of 2.5 m and a carrying capacity of 320 kg. The weight of the boat is only 22 kg, which even a teenager can carry. The boat is designed for use with a motor up to 6 HP. With. The bottom is made of slatted flooring. Includes: dismountable aluminum oars, two plywood cans, pump, repair kit and backpack for carrying. Price $367.

Heavy boat with a carrying capacity of 1100 kg. Has 4 independent compartments and an inflatable keel. Designed to work with a motor with a maximum power of 40 hp. With. The bottom is made of hard flooring. Based on the stated characteristics, it can take on board any small car: Zaporozhets, Oka, Smart. In addition to the standard configuration, it is equipped with two overpressure units. Price $980.

Manufacturer Solar

Solar 330

The most popular boat size is 330 cm and own weight only 39 kg. The boat's cylinders are made of Viniplan 6379 fabric, it has a density of 1100 g/m⁰. The transom is installed not behind the bottom, but on the bottom. The seats are made of moisture-resistant laminated plywood. The deck is very hard. The maximum motor power for this boat is 15 hp. With. Includes: oars, foot pump, seats, repair kit, valve key. Price $750.

Materials used in the manufacture of Russian-made inflatable boats

Just like all over the world, at Russian enterprises that manufacture inflatable boats, the main production material is PVC - polyvinyl chloride and synthetic fabrics.

Fabrics determine the elasticity of the structure, for example, polyester fabric is stiffer than polyamide. The elasticity of polyamide fabric gives it better tensile test performance.

By itself, polyvinyl chloride is a hard substance, but with the addition of polyurethane, the alloy becomes suitable for making strong and flexible inflatable boats.

For the manufacture of inflatable boats, a 5-7-layer sandwich made of fabric and a mixture of PVC and polyurethane is used. This material glues, cooks and vulcanizes well. By the way, a patch with glue holds better than after vulcanization.

How to choose the right Russian-made inflatable boat

Choosing a boat is easy. Decide how many people will usually be on the boat. Calculate the required motor power based on the fact that 20 kg of weight requires one hp. and search on the Internet. Whichever boat you like, buy it. But first re-read all the forums, with witness statements about the boat you have chosen.

One piece of advice. In the passenger capacity column, divide everything by two. The boat, of course, can be loaded with the number of people specified in the specification, for example, when evacuating drowning people, but such a number will not work for fishing. Therefore, 260 cm long cannot be a boat for two fishermen.

Tuning of Russian-made inflatable boats

This means making it heavier, so don’t overdo it.

However, on board it would not hurt to have a speedometer, GPS navigator, barometer, bow electric motor with remote control, windshield wipers, awning, audio system, holders for spinning rods (sacred), anchor rollers, spotlights, etc.

First of all, look at the weight. Determine what is more important to you: tuning or speed and consumption.

You can choose and buy a PVC boat, an inflatable boat with a motor for fishing and hunting, sale of a PVC motor boat in ☝☝ ☝ LOAN, INSTALLMENTS ☝☝☝ with delivery in the Globaldrive online store catalog Boats PVC (polyvinyl chloride). For questions regarding purchase and sale PVC boats You can contact by phone hotline☝ 8 (800) 2229039 ☝ (24 hours a day and free from any phone in Russia).

Prices for PVC boats at Globaldrive

Globaldrive always has a low price for PVC boats due to significant wholesale supplies to Russia.

Discounts, sales, promotions on PVC motor boats

Our online store constantly holds promotions and sales. PVC boats with motors with discounts are marked with special signs.

Shops for PVC boats for motors and outboard motors Globaldrive

Globaldrive opens stores of PVC boats for motors and outboard motors throughout Russia. You can view store addresses. Further development of the chain of stores is planned.

Tell your friends about ouronline store of PVC boatsto your friends on social networks.

PVC boats for motors: video

More details

PVC boat for motor: price, buy in the Globaldrive catalog

Thinking about buying PVC inflatable boat for motor? The online store of the federal retail and wholesale company Globaldrive will help you make your dream come true, where you can buy budget compact models with an inflatable bottom, PVC boats with a transom and keel, as well as with a rigid hull and an inflatable side. The most popular modifications of water vehicles are always available in stock, and you can get a closer look at the new products in our showroom.
The Globaldrive online store invites you to choose a model from the extensive range of our catalog. We offer high quality motor boats made of polyvinyl chloride (PVC) produced by famous world and domestic brands:

South Korea: Stormline, Barracuda;
Russia: Solar, Admiral, Kolibri, Hunter, REEF, Riviera, Frigate;
China: Gladiator, Nissamaran, Speeda, Tadpole.

Our company is the exclusive distributor of the Stormline brand, which guarantees affordable prices for best models PVC boats.

Buy a PVC (polyvinyl chloride) boat: sale on credit and installments

The online store of PVC boats Globaldrive provides its customers with favorable terms of cooperation. All products presented in the catalog have a warranty, and if necessary, you can order repairs and maintenance from us.

You can pay for the goods using any convenient one of 10 payment methods. If you do not have the full amount of money, then purchasing any type of water vehicle, motors can be purchased in installments or on credit.
Our company cooperates with various banks that will offer you transparent lending conditions without a down payment, certificates, or guarantors. You will be notified within half an hour the decision taken by installments or loan, which can be paid over a period of 3 months to 3 years. Visit our catalog of PVC boats, choose a watercraft, and we will ensure its delivery to any city in Russia!

PVC boat motor: buy from Globaldrive

In our online store you can order for PVC boats made in Japan, China, Korea, USA, Russia. When choosing a boat, you should know the features of its equipment with outboard engines. For PVC boats with dimensions up to 2.7 m, the motor can have low power - about 2-3.5 hp, maximum 5 hp, and weight 11-26 kg. Three-meter models are equipped with ten-horsepower engines, and 4-meter models are equipped with 20 horsepower engines. On vessels larger than 4 m, motors with a power of 30 hp or more are installed. and weighing from 60 kg.

Important rules for choosing a PVC boat correctly

Choosing inflatable PVC boats, you need to pay attention to:

length: for single swimming, a size of 220-240 cm is sufficient, and for a group of fishermen, hunters of 2-3 persons, models from 300 cm are the best option;
presence of transom: suspended or glued transom;
bottom design: inflatable bottom or hard flooring;
shape, modification and other parameters.

When they are selected PVC boats for fishing, then many take into account not only the thickness, but also the color of the material. The diameter of the tanks, the type of nose and other nuances are of no small importance. Contacting our specialists guarantees qualified advice and right choice in each specific case!

Types by bottom type

The most common option is an inflatable bottom, which provides a lighter weight of the product, ease of storage and sufficient load capacity along with optimal performance, which makes it easier to go on planing. By inflating modern (low-pressure inflatable bottom) or models with a high-pressure bottom to a pressure of 1 atmosphere, you can stand on them as confidently as on a hard floor.

Many fishermen, hunters and water recreation enthusiasts choose PVC payol boats with a folding or hard bottom. Hard flooring is made in the form of a collapsible or solid bottom made of wood or aluminum treated with moisture-resistant impregnation and is most often used on keel models. The hard bottom ensures comfort on board, creating maximum stability and safety. The disadvantages of a hard bottom include heavy weight designs, difficulty of transportation using, need for storage space.

Length and passenger capacity

Inflatable, keel and transom boats made of polyvinyl chloride vary in size, but the most popular of them are:

single-seat, having a length of up to 3 m and capable of withstanding a total load of up to 500 kg;
double, made in sizes from 3.3 m to 3.5 m and designed to accommodate 2-3 people and 700 kg of cargo;
three-seater, reaching a length of 4.5 m and suitable for family holidays or group hunting.

Our PVC boat website It also offers more heavy-duty models, which are distinguished by significant dimensions and are designed for boat trips or fishing.

Buy PVC boats wholesale from Globaldrive

You can buy PVC boats wholesale V Globaldrive. You can also become our dealer for the sale of PVC boats. You can find out the terms of cooperation.

Inflatable boats made of PVC are stronger than rubber ones, easy to store, varied in size and durable. They are suitable for trolling, hunting in marshy areas and general lake fishing.

When choosing, look at the motor power, bottom type, brand, carrying capacity, and the number of vacationers on board. Use the filter on the left side of the screen and our online store will select suitable models PVC boats.

Advantages and differences

Inflatable rowing, motor, motor-rowing boats are practical and easy to use due to their low weight and material features. For example, the lightweight and compact Flinc Malek 195 is suitable for fishing from the center of a small lake and overcoming light water obstacles alone. The larger Poseidon-520 is designed for 12 people and a motor of up to 50 liters - it can be used for virtually any type of water recreation.

We have compiled a general list of the advantages of such boats:

The prices for PVC boats are among the lowest, but the quality of these watercraft is no worse than others. Only rubber models are slightly lower or the same cost, but they are less durable and deteriorate faster.
There are options for both a motor and oars, or for both.
PVC boats weigh little. They can be transported rolled up even in the trunk or in a special backpack. For example, the weight of fry 195 is only 5.5 kg - it can be easily lifted by an adult. This will save on a trailer for transportation.

PVC boats are cheaper than wooden or iron ones, but at the same time they do not rot, do not rot, do not absorb moisture, are not afraid of frost or sun (do not crack under ultraviolet radiation), do not deteriorate under the influence of microorganisms and withstand aggressive environments (gasoline, oil). Therefore, they remain in perfect condition for a very long time.

PVC inflatable floats are lightweight, inexpensive, versatile and durable. We sell models from well-known, and most importantly, time-tested Russian and foreign brands. If you have any difficulties choosing, call a consultant.

To buy a PVC boat in our online store, after selecting a product, fill in your personal information and indicate the delivery address, which will take 1-3 days. When purchasing over 15 thousand rubles, the purchase is delivered free of charge within Moscow within the Moscow Ring Road.

Payment to the courier is only possible in cash. In the store you can pay with a credit card. Prepayment is relevant if the parcel is sent by a transport company to other regions.