How to make an outdoor pool on the site. How to make a pool with your own hands: step-by-step construction instructions. Fill the side walls of the bowl

A swimming pool on a country plot or dacha has ceased to be a curiosity. They install it step by step and thoroughly on their own or invite craftsmen. If you want to make a personal pond with your own hands, arm yourself with instructions and detailed photos.

In general, all types of pools that can be installed on a summer cottage are conventionally divided into:

• frame;
• foundation pits

The first ones are good because they are removed for the winter, and can also change their location every season. They are located completely or partially on the surface of the earth. Such frames are expensive, although some owners manage to make them with their own hands. Pit pools require a lot of work as they require digging a hole.

Some examples of ponds for summer cottages:

• inflatable pool - similar to a frame one, easy to install and inexpensive, but has a short service life;
• fiberglass - looks like a monolithic bowl, the installation of which requires digging a pit. Transportation causes certain inconvenience due to the dimensions of the structure;

• plastic – durable and lightweight. Its structure resembles fiberglass, which is why it has difficulties in delivery and installation;
• concrete is a suitable option for those who are planning to install a high-quality pool on a suburban area. It can be made from individual blocks or as a monolithic structure. Difficult to install, but definitely reliable and durable.

Attention! If installed incorrectly, a concrete pit pond may leak water or fill poorly. To prevent this from happening, you need to lay all the pipes correctly and take care of high-quality waterproofing.

Main stages of construction: digging a pit, insulation, pool filter

Instructions for installing a concrete pool:

• Choosing a location. It is good if it is in an open, sunny area, away from trees: their roots can destroy the bowl, and the foliage will become a constant source of debris.
• Determination of sizes. The optimal depth for a pond in which adults will swim is from 1.5 m. In this case, the waterproofing layer must be taken into account. The length and width can vary and be, for example, 4x4 m or 4x5 m.

• Calculation of the thickness of the walls and bottom, which depends on the depth of the reservoir, the level of groundwater and soil quality.
• Design of a drainage system, location of communications, steps and lighting.
• Marking boundaries. To do this, just drive in pegs at the site of the future reservoir.
• Excavation work. You can dig a pit manually if the pool is small, but it is better to use special equipment. The hole should be wider and deeper than the project suggests. For example, the walls need to be increased by 04.-0.5 m.

Advice. To prevent the soil from crumbling, dig a pit taking into account the slope of the walls towards the center. Provide a place for drainage, as well as the possibility of draining water, for which the bottom should have a slope towards the drainage system.

• Bottom leveling and waterproofing. You need to pour a mixture of sand and gravel in a layer of 0.3 m and compact it tightly. Then apply roofing material in 2-3 layers, overlapping the walls by 15-20 cm. Bitumen or liquid rubber are also suitable.
• Installation of formwork along the edges of the pool. For it, you can take boards or plywood, which will allow you to make a pool of any shape. Before starting work, you need to carefully take care of the drainage system.
• Reinforcement of the walls of the future reservoir with rods with a diameter of 0.8-1.4 mm.

• Pouring concrete into the space between the formwork and the ground.
• Removing the formwork after the concrete mixture has hardened and ironing the walls - treating them with cement and grouting with water. This will add strength to the structure.
• Reinforcement and filling of the pool bottom. Installation of metal stairs.
• Decorating the surface of the bowl with PVC film, mosaic or tiles.

Advice. You can first reinforce and fill the bottom with concrete, and then the walls. If you plan to descend into the pool via concrete steps, then the formwork for them needs to be prepared separately, after the bowl is ready.

To build a pool from individual concrete blocks you need:

1. Dig a pit, level its bottom and fill it with concrete.
2. Lay walls of blocks, reinforcing every 3rd row.
3. Build a staircase into one of the walls.
4. Waterproof and decorate the pool bowl.

A polypropylene pond can be equipped in two ways:

• buy a ready-made bowl and install it;
• purchase a sheet of polypropylene and make a container of the desired shape and size from it.

In any case, the installation of such a pool consists of the following steps:

1. Digging a hole whose dimensions exceed the size of the bowl.
2. Waterproofing the bottom and filling it with concrete.
3. Installation of the bowl.
4. Installation of drain and nozzles for water supply.
5. Insulation of pool edges and pipes.
6. Connecting communications and pouring concrete.

Attention! To make the walls even, you need to make formwork inside the bowl and pour concrete in stages, to a height of 0.3-0.35 cm per day.

Any pool must be equipped with a filter, otherwise the water will soon become dirty and unsuitable for swimming. You need to pass it through a cleaning device using a pump 2-3 times a day, even if no one has swum in the pond. Today there are 3 main types of filter units:

• sand - quite voluminous and are used mainly in public swimming pools. They look like a container filled with sand, where gravel, silver sand, etc. can be added;

• cartridge - purify water using propylene membranes. They are small in size and can be installed outside the reservoir itself. Clogged cartridges need to be changed frequently;
• Diatomaceous earth filters are the most expensive filters, consisting of several cartridges. Water is purified from most microbes using diatomite soil with silicon dioxide.

Advice. The main criterion for choosing a filter is performance (volume of water passed through). It is indicated by the manufacturer.

Pool skimmer: purpose, types

Like a filter, a skimmer purifies water from bacteria, but only processes the top layer of the surface. It also dampens waves when several people are swimming. The skimmer looks like a metal or plastic tank with a water intake pipe. It is equipped with a filter for deep cleaning of debris, insects, and leaves.

The skimmer can be:

• hinged - often used for frame or inflatable pools;
• built-in - used during the installation of a pit reservoir.

Typically, manufacturers include a drawing with the device, according to which the skimmer can be assembled. It must be installed at the stage of pouring the walls with concrete. It is necessary to provide boxes for openings. A plywood shield is prepared under the skimmer, which is then installed into the pool bowl together with the attached device.

Advice. One skimmer cleans 25 sq. m of water. If the volume of the pool is larger, you will need several devices.

As you can see, setting up a pool is quite a troublesome task. However, after studying the instructions and selecting necessary materials, you will be able to cope with this task.

Ideas for building a swimming pool at the dacha: video

IN summer time When the weather is quite hot outside, it is especially pleasant to be in cool water. However, it is not always possible to go out into nature, where you can swim to your heart’s content in a river or any other body of water. An excellent alternative to this is your own pool, located on a summer cottage, or on the territory of your country cottage. But to do it, you need to have certain skills and knowledge, which will be discussed in this article.

Before we begin describing the procedure for building your own pool on your site, I would like to talk about the types of structures that you can install at your place. Each of them has its own characteristics, which naturally affects the materials used and manufacturing technology. There are several main types:

4. Swimming poolsstationary type . This type of pool can rightfully be considered a full-fledged pool that can serve its owner for many years. Of course, its construction will require great effort and financial costs, but the results obtained will please everyone.

In principle, this is where the list of types of pools ends. The first three types can be purchased ready-made, so we will not consider them. We are more interested in a stationary pool, the construction of which includes several stages.

Pool location

We have decided on the type of pool. Now we should think about where exactly it will be located on the plot? In addition, an important point will be the size of the future pool, which entirely depends on the individual wishes of the owner, as well as on the size of his own summer cottage.

As a rule, many are inclined to install a pool directly behind the house, but here you need to take into account several nuances:

• Soil properties. A lot depends on its characteristics, because the first stage of work is digging a pit. If the soil contains stones, the work can be very difficult and energy-consuming. The most preferred is clay soil, which has very good waterproofing properties;
• The direction of the wind must be taken into account. It is clear that the wind can be changeable, but when thinking about the location of the pool, it is necessary to take into account those areas where the wind blows quite strongly. If this circumstance is not taken into account, then there will be a lot of foreign objects and small debris in your pool;
• The pool should be located in an area where there are no trees or various shrubs. All plants are drawn to water, so the same tree roots can cause damage to the pool bowl.

As for the size of the future pool, everything depends solely on the wishes of a particular person, as well as the size of his plot. For example, if one swimming lane is enough for you, then two meters is enough for the width of the pool. If there are two tracks, then the width will double, i.e. up to four meters.

The depth of the pool will also depend on the individual preferences and goals of the owner. In most cases, one and a half meters is enough for the depth, but if you plan to also equip a diving tower, then naturally the depth will be greater. In addition, if you have children, the depth should not be too great, or they should be under your constant supervision while swimming.

What can you build a pool from?

If you intend to equip your own swimming pool at your summer cottage, then you have two options - purchase a ready-made bowl, which is sold in a specialized store, or make this bowl yourself. It should be noted that in both cases it will be necessary to dig a pit.

The advantages of ready-made bowls include ease of installation, environmental friendliness, high reliability characteristics that prevent environmental influences, etc. If we talk about the disadvantages, then such containers are quite ordinary in appearance, so they are not suitable for every person.

This is why many are inclined to self-production pool bowls. One of the options for how all this can be implemented in practice is shown in the following video:

As for the materials needed for work, there are only a few of them:

• Hydroconcrete or cement of a certain grade (C500);
• Sand or crushed stone;
• Ruberoid and bitumen mass;
• Boards and waterproof plywood;
• Reinforcing mesh and wire rod;
• Facing materials - ceramic tiles, mosaics, PVC film, etc.

This is a fairly standard list of the materials that we will need during the construction process. However, the modern market building materials offers a fairly large selection of products that can be used to build a pool bowl. In particular, polystyrene foam blocks, which have proven themselves with great success, may be suitable for these purposes. the best side in terms of ease of installation and low weight of structures.

But we will consider the option of making a bowl using concrete, because... this option looks more traditional and suitable.

How to build a swimming pool with your own hands?

Building a swimming pool with your own hands can be roughly divided into several steps:

• Drawing up a pool project, as well as choosing a site for construction;
• Marking the boundaries of the future pool;
• Excavation work;
• Making formwork, as well as pouring the structure bowl;
• Processing the bowl, as well as applying waterproofing;
• The final stage, which includes the installation of related equipment, lighting, etc.

There is a lot of work, but you shouldn’t neglect any of the stages. The period during which you will enjoy your own pool in your garden will depend on this.

Excavation

Having decided on the location, you can proceed directly to the work itself. We mark the boundaries of the future pool on the territory using ordinary wooden stakes and a fishing line or rope stretched between them.

Now comes the turn of the most labor-intensive and important construction process - earthworks, i.e. digging a pit. At the same time, it is important to understand that all parameters of the pool (length, width and depth) should be made approximately 50 cm larger. This is necessary so that there is space for arranging the formwork. If your pool is small enough, then all the work can be done manually, but if the size is impressive, then you obviously cannot do without special equipment.

After the concrete has hardened, you can remove our formwork. Then it is necessary to treat the entire surface with a mixture of cement and water, as a result of which we have a waterproofing film.

We line the bottom of the pool with a mesh made of rebar. Then we fill it with concrete so that its thickness is approximately 15-20 cm.

Bowl lining

Mosaic or ceramic can be used as facing materials. Both options have a right to exist, because they have a fairly attractive appearance and are also very easy to care for.

There are other materials for cladding (for example, PVC films), so the choice remains entirely up to the person himself. To improve the area around the pool, you can plant a lawn.

If you have enough money, then you can equip your pool with additional equipment:

• Water purification system. Typically, this system includes a valve, a filtration tank, circulation pump and various filters. If you provide such an installation for your pool, you can change the water in the pool much less frequently;
• A flow-type heater that allows you to swim in the pool, regardless of the ambient temperature;
• Illumination around the entire perimeter of the pool will look very advantageous.

Remember that the area around the pool should also be equipped with something. Ceramic tiles with an anti-slip surface are perfect for these purposes, allowing you to avoid possible injuries and falls.

Each craftsman who has built a homemade pool on his site has his own personal preferences and secrets. You can clearly see one of the construction methods if you watch this video:

Manufacturing homemade pool on a summer cottage - this is a rather labor-intensive process, but it is quite possible to carry it out if you follow certain instructions. Of course, certain financial investments will be required on your part, but each of us understands that our own pool is a great way to relax in the summer without leaving your own home or cottage.

Having your own Vacation home, cottage or plot, many are thinking about arranging a swimming pool. In hot summer weather, everyone wants to swim in cool, clean water, and it is not at all necessary to go to the sea or lake to do this.

A do-it-yourself pool is a building that is not difficult to organize, as many people believe, and it will not take much time and money.

Country pool: detailed description and types of structures

Artificial ponds allow you to fully enjoy the coolness on hot days. In addition, the pool on the site is a place of relaxation not only for adult family members, but also a place for water treatments and games for the younger generation. Out of season, the pool can be used as a storage tank for watering plants in the area.

The following types of reservoir structures are distinguished:

• stationary;
• collapsible;
• inflatable.

A permanent pool is a type of structure that uses a reinforced concrete bowl. They are reliable, durable and installed for a long period of time. Their sizes and shapes can be very diverse: medium, large, tall, oblong, round, two-level, etc.

Stationary structures include, as subspecies, frame and frameless reservoirs.

Frame structures can already be purchased at finished form. It looks like a metal structure with a stretched fabric; as a rule, PVC films are used. In addition to the pool, the set includes ladders, a water purification system, a filter and a pumping station. A frame pool is installed only on summer season, and then the entire structure is dismantled and stored until next summer.

A collapsible pool model is more suitable for summer cottages that are not fenced or guarded. Such pools are inexpensive, easy to assemble and disassemble, and also take up little storage space. Water is pumped into the reservoir independently, but it must be carefully filtered.

An inflatable pool is the simplest design of a reservoir and the most unreliable. However, it is inflatable pools that are widely popular among consumers. You can install it anywhere, and even take it with you in your car. It will be difficult to inflate it yourself, but if you use a pump, the process will be easier. The disadvantages of inflatable tanks include:

• weight restrictions;
• the material can be easily pierced or cut;
• sags when there is a large amount of water;
• the water is not purified and stagnates, it must be changed periodically;
• takes a long time to deflate.

To avoid the hassle of constantly assembling and disassembling the pool, you can build it yourself on your own site.

How to make a swimming pool at your dacha without any hassle

Setting up a swimming pool is not an easy task, and you need to carefully prepare for it.

If you have already decided on the type of construction, then you should think about where to place the future reservoir, what size it should be and how much material is needed to complete all construction work.

Before you start building a pool, you need to choose the optimal place on your site where it can be placed.

Experts recommend choosing a place where there is a slope of the soil. At the same time, it is advisable that trees and shrubs do not grow near the pool, because their root system can damage the waterproofing layer. In addition, in the fall, leaves will begin to fall from the trees, and the bowl will need to be regularly cleaned of debris.

When choosing a place on the site, you need to monitor the direction the wind is blowing. It is preferable if the wind flow passes along the bowl of the tank, then all the leaves and debris will accumulate at the edge of the pool and it will be convenient to clean it.

Groundwater plays an equally important role. It is recommended to organize the installation of a pool in a place where the groundwater level from the surface of the earth reaches at least 0.5-1 meter.

In this case, the type of soil also plays a special role. The best option for building a reservoir is clay soil. If the waterproofing is damaged or broken, clay can stop water leakage.

Dimensions and depth of the future reservoir

The size of the future reservoir should be determined based on its intended purpose.

If you plan to build a pool where you can swim freely, then it is better to choose rectangular or oval shapes. You can opt for a round bowl, but you won’t be able to swim much in it. The design can be of any shape, even the most atypical, but the main thing is that you can move freely in it.

Optimal sizes for rectangular shape The pool is considered to be: width – 2.5 meters, length – 5-6 meters. At the same time, the width can be increased to 4-5 meters, as well as the length, if the size of your plot allows it.

If your goals include diving from a side or jumping from a high place, then the minimum depth of the bowl can be 1.5 meters. At the same time, if a springboard or tower is additionally constructed, then the depth should be increased, but a smooth transition of up to one and a half meters should be left.

If you plan to build a pool for children, then its depth should be 50-70 centimeters.

A multi-level pool or a pool with transitions to different depths is more difficult to arrange. The installation of such transitions should be carried out carefully so that sudden changes do not occur.

Construction materials and selection of suitable tools

In order to properly organize the construction of a swimming pool, it is worth thinking about all the materials in advance and preparing construction tools.

For arrangement you will need:

• concrete mixer;
• carpentry tools (hammer, knife, stapler, rules);
• carpenter's kit (self-tapping screws, screws, nails, tape measure, wrench, etc.);
• tamping machine;
• screwdrivers;
• sand and cement;
• boards 25 mm in diameter;
• beam 50 mm;
• waterproofing material;
• fittings;
• primer;
• stapler for reinforcement;
• adhesive base for tiles.

The finishing of the pool can be made of: tiles, mosaics, polypropylene, PVC film. The film can be selected in different colors: white, blue, light blue, pink, etc.

When choosing polypropylene as a finishing material, you can rest assured, because it is resistant to aggressive influences and is highly durable.

If you decide to equip your pool with tiles or mosaics, then when choosing, you should pay attention to the water absorption indicators - it should be low. At the same time, mosaic always looks respectable, more expensive and aesthetically pleasing.

How to build an inexpensive pool with your own hands

The pool equipment process consists of several main stages:

1. Selecting the type of structure and drawing up a project for the future tank. Selection of the optimal location for placement on a summer cottage.
2. The process of marking on the ground. Excavation.
3. Construction of formwork and pouring under the pool bowl.
4. Carrying out waterproofing and finishing work.
5. Additional equipment for the pool: lighting, equipment, cleaning, filtration, etc.

The first step is to mark out the future reservoir on the site and carry out excavation work. To mark the structure, you can use small wooden blocks and brightly colored fishing line.

Following the markings, it is necessary to dig a pit for a pool of the preferred size, while digging half a meter more to arrange the formwork.

After excavation work, you can begin arranging the formwork.

The walls and bottom of the pit should be compacted - for this you can use a tamper.

Then lay a 25-30 cm layer of sand and compact the surface again.

Lay reinforcement along the surface and tie it with wire using a special hook.

The next step is to apply a layer of waterproofing. Choosing a waterproofing material is not difficult, and there are many options available on the market today. However, roofing felt and bitumen mass are better suited for a pool. Apply a layer of roofing felt waterproofing to the entire surface and even the very top, and then apply 4 layers of bitumen mass on top.

Next, you need to install the drainage system. The drainage of water from the pool can be organized into the general sewer system on the site. In addition, this is the most basic way to remove waste. The drain from the pool is connected to the sewer system, and the pipes are hidden under a layer of earth and laid at a slope. Then you can begin organizing the formwork.

Installation of formwork can be done using available tools and materials, and then pour everything with concrete mass. The walls should be poured in several layers. Only after the concrete has hardened is the formwork removed. This may take from two to 4 weeks, depending on weather conditions.

Laying a waterproofing layer and finishing work.

A layer of waterproofing is applied to the hardened concrete walls: it can be film, mastic or any other material. To finish the corner parts of the pool, you should use a special tape. This helps to avoid leakage.

Then you can safely begin finishing work.

Pool structures can be made of ceramic tiles, mosaics or PVC film. If tiles or mosaics are being laid, then after the main work, it is necessary to grout all the seams with white or cream grout and wipe the surface from grout residues.

Pool equipment and additional equipment. In addition to the pool, if desired and possible, you can add lighting, water purification devices and even heaters.

The final stage of work is the arrangement of the area in front of the pool and around the circumference.

Pool bowl: ready-made or homemade

As described earlier, excavation and filling of the bowl are the most labor-intensive processes. But today, from many manufacturers you can find ready-made pool bowls that only need to be inserted into the ground and fixed.

In addition to ease of installation, the advantages of such bowls include the availability of various shapes, sizes and colors. At the same time, if a concrete bowl may crack during operation, if movements in the ground begin, then such a fate does not await the finished bowls.

Similar designs are produced in plastic and composite. According to the installation principle, they are similar, the only differences are in the characteristics. The plastic must be additionally insulated around the perimeter of the walls. In plastic construction, the main material is polypropylene. Polypropylene blocks are not afraid of fading, do not require regular draining of water, and are not afraid of damage.

Composite structures are made of fiberglass, which is resistant to temperature changes.

Of the many advantages, there is still a disadvantage to ready-made bowls - they are too expensive in price.

Therefore, arranging a swimming pool with your own hands is a more economical and profitable business than buying a ready-made structure.

[[[Article on topic:

]]]

The July heat evokes thoughts of water, swimming, cool rivers and lakes. It is difficult to imagine a person who, in such weather, would refuse to have his own swimming pool for relaxation and cooling. Especially if he has a personal plot or works in the country.

However, not every yard has room for a large swimming pool, just as not every owner has the means to build one from scratch. Therefore, in this article we have collected 6 of the best modern ideas for a small but inexpensive pool that will turn this heat into your best relaxation partner.

Frame, inflatable and made by yourself - then you will get acquainted with the simplest and most economical options for swimming pools today, and also see them in 40 photos in the design of a summer house or a small courtyard!

1. Best choice of 2016 - frame pool (10 photos)

Modern frame pools are available in a wide range of sizes and prices. A simple children's version measuring 2.5 by 1.5 m and a volume of 1200 liters costs about $60 (1500 UAH or 4000 rubles).

A more spacious model with a volume of 6500 liters and a diameter of about 4 meters will cost twice as much. But you must admit: this is an inexpensive price to pay for such pleasure, especially when you consider the following advantages of frame pools:

• Quick and easy installation (the pool is folded, not inflated);
• Reliable, stainless metal frame;
• Dense walls made of heavy-duty PVC and polyester;
• Additional support for the walls with thick tapes;
• The presence of a drain valve that can be connected to a garden hose to carefully empty the pool of water;
• No need for maintenance (only keeping the surface clean and sometimes checking the water filter);
• Warranty (length depends on the manufacturer).

Many frame pool models come with a cover that will protect the pool from leaves and other debris on days or times when you won't be using it.

Since the pool can safely stand all summer, it is sometimes additionally equipped with a body or even a podium so that this entire structure fits beautifully into the design of your dacha or plot. This is how some craftsmen design frame pool(photo below):

2. Children’s and family inflatable pools - photo on site

Children's and "adult" inflatable pools are considered the main competitors of frame ones. They are easy to transport and relatively quick to install, although you will need to tinker with the pump for some time. The walls are also made of dense PVC and polyester + most manufacturers complete inflatable pools with a protective cover against debris.

Perhaps the main advantage is the cost of such pools - they are 1.5 times cheaper than frame ones. At the same time, they also have one serious drawback - the lack of water drainage. In addition, if the inflatable pool is large, you will need to purchase an additional electric pump.

Attached beautiful photos inflatable pools on personal plots.

3. Concrete pool to order or do it yourself

Of course, not everyone can do this option, and the cost will be decent, but there are craftsmen who managed to build concrete pool with your own hands. So we decided to include it in our list of inexpensive ideas.

The most problematic aspect in this matter is digging a hole. You can handle this on your own only if you plan to build a small and shallow pool. Renting a crane today is extremely expensive, and it is only advisable when creating a luxurious swimming pool, and not just for relaxing in the heat.

Unlike frame and inflatable pools, the concrete version is stationary, but at the same time one of the highest quality and most durable. To make such a pool with your own hands, you usually use a mixture of concrete and sand, which is sprayed onto a metal frame. The general procedure is as follows:

1. Dig a hole for the pool. Its depth and width should be 23-31 cm greater than the expected dimensions of your pool. This distance will be filled by the form.
2. Install water supply. Typically this will include a drain pipe that will be located at the bottom of the pool, as well as all the necessary structure (pipes, filters and pumps) to ensure a safe flow of water through the pool. It is acceptable to use PVC pipes with a strong binding material.
3. Cover the walls and bottom of the pool with a steel frame, which will maintain its shape and strength over a long period of use.
4. Spray the concrete and sand mixture onto the steel mesh using a powerful sprayer. The most popular mixture for building a pool today is Gunite (sprayed dry) or shotcrete(mixed with water). When applying, it is recommended to keep the sprayer nozzle at a distance of about 1 m from the steel mesh, direct the jet perpendicular to the surface and move it in a circular motion.

Then you just have to wait until the concrete hardens, after which you can begin decorating the walls of the pool with tiles or paint (optional).

Photos of finished projects on the topic of how to build a swimming pool with your own hands:

Also read:

4. Swimming pond or natural pool

Another option for an inexpensive stationary pool that you can build with your own hands. Instead of concrete, gravel and clay will serve as walls, and natural aquatic plants (reeds, sedges, lilies, etc.) can serve as decorations.

The principle of building such a pond-pool is similar to creating a concrete pool, but can be done without a steel frame - just try to ensure that the walls have good slope, and were not perpendicular to the bottom. When the walls turn out to be perpendicular, then for stability they are covered with a layer of clay or bentonite.

It is believed that a natural pool can do without expensive filters and pumps if it is planted with natural plants. However, in order for them to truly purify the water, approximately 50% of the entire surface needs to be planted with them.

In a natural pool, the water must be constantly circulated and aerated, otherwise it will stagnate and become filled with unpleasant-smelling bacteria. To direct the flow of water through the pool, flexible PVC pipes that are not afraid of cold weather are best suited. They are buried in the soil approximately 45 cm deep. For underwater aeration, you can use an air compressor and high-strength pipes that connect to a diffuser. Note that aeration devices consume little energy and should operate only 4-8 hours a day (depending on the size of the pool).

Also read:

5. Metal containers as an inexpensive pool for a summer residence

Cargo containers and other large containers can easily serve you as a swimming pool for your garden or children's pool Location on. The only problem with their use is that some metal containers are not protected from rust. To solve the problem, they are painted or covered with another waterproof finishing material. If you don’t want to do this, then use galvanized tanks as a pool, which are not in danger of corrosion.

6. Simple ideas on how to make a swimming pool with your own hands (photo on the site)

Tarpaulin is another material that is widely used for creating simple DIY pools. All you need to do is make a reliable body from scrap materials and cover it with a tarpaulin. We invite you to take a look at the latest photos in this article and evaluate what a pool looks like from wooden pallets, haystacks or other materials in a country house or garden plot.

Also read:

Inexpensive pool for a yard or cottage: 6 ideas + 40 photos updated: March 12, 2017 by: Margarita Glushko

Swimming pools in the country have long ceased to be a rarity. Only the sizes of such structures and their shape vary. It can be either full-fledged, fully equipped with appropriate equipment, or small, intended only for bathing children.

Types of country pools and their features

First you need to decide which of the country pools you plan to place on your site. According to installation methods, they are divided into:

Based on the materials used to make them, garden pools are divided into products made from:

It is better to protect a stationary pool with at least a simple canopy. In this case, less debris and fallen leaves will accumulate in it.

Filtration system

Without a quality filtration system stationary swimming pools for a dacha, in a very short time they will simply be overgrown with mud. Depending on the method of water circulation in them, you can choose any of the cleaning systems:

Monolithic concrete pool for a summer residence

From durable reinforced concrete you can make both a small swimming pond and a full-fledged one. swimming pool equipped with modern equipment. But in both cases, the process of its arrangement is largely similar. We will describe in detail how to build a swimming pool at your dacha with your own hands from concrete.

Selecting a location and preparing the area

To ensure that the water in the pool warms up as quickly as possible, it is placed in an open space, away from tall buildings and trees that block the sun. Close proximity of vegetation is also undesirable because in the fall, falling leaves will clog the pool, and it will take much more time to clean it. The growing roots of such powerful plants as poplar, willow or birch can easily destroy even concrete.