High-quality equipped fishing screen, handmade. Smooth networks, screens, scarves

A good fisherman has in his arsenal many types of gear, baits and other components for any season. fishing. In addition, any professional fisherman needs to have in his fishing gear a fishing device such as a fishing screen. Many fishermen are familiar with it since early childhood. It is easy to make and does not require large investments to make it. Since not all fishermen have enough finances to buy it in a fishing store, let's see how you can make a homemade fishing screen, or, as it is otherwise called, a fishing TV, right at home and save your hard-earned money.

In fact, using a fishing screen big catch It’s not worth the wait, but both adult fishermen and children love this device. With it you can catch enough fish in your fish soup or just fry it, but the most main feature The advantage of a fishing screen is that it does not pollute the fish’s habitat, that is, a body of water, and does not harm the fish. You can catch about the same amount of fish with this device as with a spinning rod or fishing rod, but the only difference is that you cannot catch large fish with it. After all, the pleasure is not in what kind of fish you catch, but in the process of fishing itself.

Materials for a homemade fishing screen

If you haven't changed your mind and still want to make a fishing screen, let's get started. For this you will need the following materials:

• float made of foam;
• a metal rod or, as it is called differently, a rod;
• wooden slats;
• fishing line;
• mesh fabric;
• nylon thread or cord.

Stages of making a fishing screen

1. To make a fishing screen, you will need a square or rectangular frame. You can choose the sizes by eye. The dimensions depend on the depth of the pond and the place where you are going to throw it.
2. The float or the top of the screen is made from a bamboo or wooden stick, which must be painted with varnish. This process is necessary in order to wooden structure did not swell in water. You can, of course, not varnish, but this can subsequently destroy the structure. Cargo or bottom part must be made of heavy materials to immerse the screen to the bottom of the reservoir. For the lower part of the fishing screen, you can use a metal rod. Then we cut the mesh fabric to the size of the prepared frame at the bottom and top parts canvas and pull the cord. This must be done on each cell or at least every other one.
3. When you have a prepared frame, you need to attach a mesh fabric to it using a strong thread. This is done in the following steps: first we fasten the end of the thread to the bamboo stick, then the mesh cell must be tied in other places using thread. And this continues until the mesh fabric is completely attached to our frame. A similar procedure must be done with a metal rod.
4. After this, from the side of the canvas we pass the prepared thread in the form of a spiral, starting from the stick and ending with the rod, while not skipping a single cell. This is necessary in order to relieve the tension of the mesh under water, and when raising the mesh to the surface of the water.
5. We attach a cord to the stick in the middle, then attach a float to it, for the manufacture of which foam plastic was used. The presence of a float is necessary in order to know where the fishing screen is located.

Note: a mesh made from fishing line is the most catchy compared to a mesh made from twisted rope, while a mesh made from fishing line has a shorter service life than a mesh fabric.

When fishing with a fishing screen, it’s worth knowing a few tricks, which we’ll look at below. The size of fish caught depends on the size of the mesh used. When using an 18 mm mesh, you catch a small fish that is suitable for bait when hunting a predator. If you use a 24 mm mesh, then there is a chance of catching big fish. Whatever cell you use, you always need to feed the fish, then you will get good catch for fish soup and a wonderful holiday in nature.

For many people, fishing is not only a hobby, but also a means of earning money. In this regard, many fishermen began to come up with additional gear that could increase fishing efficiency.

Professional fishermen know that in many regions it is prohibited to use nets because they can catch too many fish. Despite these limitations, there is a small net called the Screen that can be used to catch fish. First you need to go to the store to purchase everything you need to make this gear. Along the way, you can stop by a plumbing store where you can buy air filters that you may need for your apartment.

Materials

The screen is a simple mechanism that looks like a rectangular frame. Most often the screen size is 1.5 by 2 meters. Such tackle can be used at any time of the year.
To make this unique gear you will need:

Mesh fabric 4 meters in size. You can make a net yourself if you have time to weave it.

Wooden slats.

Float made from polystyrene foam.

Floating- This is a long stick that is made from light types of wood. The ideal tree is considered to be willow or aspen. It is best if the stick is smooth and round. As for the diameter, it should be 2 cm. It makes a flattening on both sides, and then holes.

Next you will need a sinker. A metal rod can act as a load. It is best if the diameter of the rod is within 8 mm. If the rod is larger than 8 millimeters, it will be difficult to transport. Holes are drilled at both ends.

Nylon thread, half a millimeter in diameter.

Making tackle

The upper part of the screen should be made of a bamboo stick or slats, the length of which is 1.5 or 2 meters. To prevent the wood from swelling too much in water, it should be coated with varnish. The lower part must be made of metal.

Cutting off the network the right size, and then insert a nylon thread into its upper and lower parts. It must go through every cell. After this, you should tie a bamboo stick and sinker.

To relieve tension from the network, a cord is passed around the entire perimeter, wrapping a sinker and a bamboo stick. A nylon cord and a float made of foam plastic are tied to the top stick. This will reveal the location of the screen.
If the screen is installed from the shore, you will need a long stick. You can also install the screen using a boat.

A screen for fishing is a primitive tackle and, moreover, illegal, but fishing with a screen is still considered effective among fishermen. The availability of materials and ease of manufacture make this device widespread. Therefore, this tackle is very popular among fish hunters. Let's find out what it is and how to do it?

Among the numerous fishing tools, there are also those that are so simple that they do not require special skills or abilities. Such tools also include a screen or, as it is also called, a TV for fishing.

1. Wooden slats or sealed tube.
2. Square or rectangular grid.
3. Metal rod-weight.
4. Cord.
5. Float.

As you can see, there is nothing complicated in this gear and it is easy to make with your own hands.

Fishing on the screen is easy and simple. It is enough to throw it into the intended place of parking or feeding of fish and after a while take it out with the catch.

Despite the fact that the tackle is considered poaching, the parts for its manufacture can be purchased at the store and made by yourself. This will not take much of the fisherman's time.

As already mentioned, the net is bought at a fishing store or a piece is cut off from an old unnecessary net. You also need to find a wooden strip and a metal rod.

• roulette;
• scissors and knife;
• twine or thick fishing line;

You immediately need to decide on the size of the TV. Usually its dimensions are no larger than 1.5 by 1.5 meters. In addition, you need to choose the mesh size, which should match the fish you plan to catch.

Using a screen is convenient for catching live bait, and for this purpose a smaller mesh size is required. If the angler’s goal is a large fish, the mesh size increases accordingly.

When starting to make a TV, you first need to cut the rail to the size of the mesh. After this, mark at regular intervals on the rail the points at which the screen “display” will be attached. The rod at the bottom of the TV should be equal in length to the rail.

Having drilled holes at the ends of the rail, we attach the mesh to it using fishing line or strong synthetic thread. Then we attach the rod to the bottom of the net using fishing line. Some people use PVC tape to secure the net.

We tie a strong twine or thick fishing line to the holes in the ends of the slats so that the made screen hangs on it. In the middle of this twine we knit a cord, at the end of which a large foam float is attached. It is needed to indicate the location of the TV, as well as to control the presence of fish on the screen.

Here's how to make a TV for fishing with your own hands - simply and with a minimum of cost.

Fishing on a TV is not particularly difficult. It is best to place the screen from a boat, although you can throw it into the water from the shore. To do this, you can use a kind of “rod” from any suitable twig or branch.

The gear is placed at the place of feeding or migration of fish, at the border of aquatic vegetation, in small channels, etc. To attract fish to the TV, some anglers tie some kind of bait in the center of the screen: a piece of cake, a small bag of bread, porridge, etc.

There is a more original way to lure fish into a net. This is ordinary Christmas tree tinsel, pieces of which are tied in different places on the grid and attract fish with their shine. This way you can catch predatory fish.

It must be remembered that gear called “TV” or “screen” is considered poaching, and the angler using it can be fined.

Currently, many fishermen refuse to use such gear. But nevertheless, this method of fishing attracts the attention of fishermen for various reasons.

1. Simplicity.
2. Availability.
3. Cheapness.
4. Mobility.
5. Versatility.

Considering these reasons, we can confidently say that fishing using a screen will be used in Russian reservoirs for a long time.