House for fish made from plastic bottles. We catch fish with a plastic bottle. Shore fishing tackle

You can make cute and beautiful fish with your own hands from plastic bottles. If you hang them, they will become a decoration for example for a swimming pool, bathroom, etc. Bottle fish are very easy to make, even children can make them for themselves. Today we will look at several master classes on making fish from bottles and learn how to create them with our own hands. Bright fish will always catch your eye and attract attention. The author of this master class is Svetlana Ksenzova.

To make fish from bottles you will need:
* Plastic bottles.
* Dye.
* Scissors.
* Felt pen.

Method for making fish:
To make a fish we need two plastic bottles. The bottles must first be washed well; if there are labels, remove them. Next, paint the bottles gold (you can paint them as you wish).

Let's start making the body of the fish. When the paint bottles dry, take one and crush it in the middle.

Take a felt-tip pen and draw fins and a tail on the flattened bottle.

At the bottom of the bottle we cut out a round hole, approximately the size of the cap.

Cut out the fins along the marked lines.

We take the second bottle and start cutting it with scissors at an angle of 45 degrees into strips. The width of the strips narrows from the bottom of the bottle to the neck. We cut the entire bottle into strips.

We insert the finished tail into the hole of another bottle and screw on the cap. Draw a mouth and eyes or glue ready-made ones. Svetlana made eyes from a plastic spoon. I drew eyes on the spoon and then glued them to the fish. That's it, the bottle fish is ready.

Another bottle fish.

From a plastic bottle we will create another cute fish, which will also become your decoration for the garden or pond. The author of this master class is Amy.

To make a fish you will need:
* Plastic bottle.
* Spray paint, two different colors (the author used black and blue).
* Stapler.
* Scissors.
* Cutter or knife.
*Hot glue or any plastic glue.
* Eyes.
* Cloth.

Method for making fish from bottles:
Firstly, you and I must remove the film and rinse the bottle well. Needs to be washed inside and out. The color of the bottle for making a fish does not matter. Any color of plastic will work fine, it will still be painted. Using a cloth, wipe the bottle dry.

Now we cut off the very neck and bottom of the bottle. Be careful, if you have children helping you, do it yourself.

If there is any moisture left in the bottles, dry thoroughly. Then we press it in the middle, flatten the bottle and secure it with staples.

Take scissors and start cutting as shown in the photo.

We cut out the mouth and gills, and also look at the photo to see how everything needs to be done correctly.

When everything has been cut out, the fins and gills are placed to the sides.

Now all that remains is to paint our fish. The author used black and blue colors. Dark and bright colors look very beautiful. We put the fish on a stick and paint it with spray paint. The main color of the fish is blue, and the tail and fins are slightly painted black. We paint our fish well and on both sides.

Glue the finished eyes to the fish. That's it, the bottle fish is ready.

We take the bottom and make a stand out of it. You can leave it unchanged, or you can cut it out as shown in the photo.

We paint it black and wait for it to dry.

If you want the fish to always stand on a stand, then apply glue to it and glue the fish. A wonderful fish from bottles is ready.

You can also make a funny aquarium from several fish and hang them on strings, then they will create an imitation of swimming. Everyone who sees such an aquarium will receive an unforgettable experience.

In conclusion, I want to show you a few interesting options for making fish from bottles.

Dear friends, I am glad to welcome you all!

Today I would like to present to your attention a new work by Tatyana Dovganyuk. This is a fish made from ordinary plastic bottles. This fabulous decoration is suitable for any patio. Tatyana shared with us the secret of making it.

In order to make such a fish you will need:

1. hot glue gun.
<<>>
2. scissors.

4. screwdriver.

5. wire.

6. plastic bottles.

7. self-tapping screws.

Preparation method:

So, let's start making our inhabitant of the underwater kingdom. First we will make the form. Torso. We make it from a 1.5 or 2 liter plastic bottle. Cut it with scissors so that it looks like in the photo.

We also cut out parts for the head from plastic bottles; the basis for the eyes can be two halves of a plastic ball. We cut out the lips from a small bottle and cover them with varnish. We carefully glue all the parts of the head with a hot gun. Then we will outline the fins and tail, and we will attach them to the body with self-tapping screws. Next, we put the head on the body and it turns out something like this.

A Lenore bottle and bright bottles will serve as scales for our charming fish.

To make it easier to attach the scales, you can temporarily detach the fins and tail. We attach the scales in the traditional way, using wire and an awl. You need to start attaching the scales from the tail. After our fish is completely covered with bright scales, we will screw our fins and tail back. We will correct and tighten up all the unevenness and roughness, if of course there are any. Well, our fish made from plastic bottles is ready.

Having settled on your site, she will be a bright piece of a children's fairy tale.

- This " aquarium«.

Plastic bottles left over from carbonated drinks are good for... If you plan to decorate the local area, then you need to collect a fairly large amount of this waste material. And if the craft is intended to participate in a competition or decorate a room, then two or three bottles will be enough.

We came up with the idea of creating aquarium made from plastic bottles. Of course, you cannot pour water into a container with a volume of 1.5 - 2 liters and you cannot plant live fish. However, as a souvenir or toy, such an aquarium definitely deserves attention. We present to your attention a master class with photos.

Craft “Aquarium” from plastic bottles

So, for this craft you will definitely need:

plastic bottles of several colors,
glue for plastic, wood or glass,
scissors.

Additionally useful:

pliers,
matches, candles or gas burner fire,
any other decorative elements that can be used to paint the aquarium.

First, cut the white bottle into two parts. We need to adjust the height of the aquarium, and therefore we cut off a few centimeters from these two parts. Reducing the size of the bottle will allow you to fill the bottom of the plastic cup with vegetation and pebbles.

Next, we chop the brown and blue bottles into squares, triangles or trapezoids with sides measuring within 1 cm. The number of geometric shapes is at the discretion of the master. We imitate pebbles and glass with which we will cover the bottom of the aquarium. The plastic crushed in this way must be melted over a fire. You will need pliers. Each piece will have to be grabbed with a tool and brought to the flame. As a result, the plastic takes on the appearance of pieces of glass with curved edges.

At the same time, we cut out the vegetation for the aquarium from the green bottle. It is impossible to recommend anything here. We act without patterns or preparation. We process the finished plants using the fire of a match, candle or burner, that is, we traditionally melt the edges of the workpieces.

Now use glue to secure the greens to the bottom of the glass. Pour brown pebbles on top, followed by blue pebbles. We will glue some of the blue plastic onto the walls of the aquarium. This is how we indicate the water level in the container. Additionally, we used a real shell to decorate the craft.

Decorate the neck of the aquarium lid with a blue flower. It is cut out of plastic and decorated with a fine mesh made using a hot sewing needle. The edges of the flower are melted.

Our aquarium is ready to welcome its little residents.

If desired, fish can also be cut out from. However, our dad loves to go fishing in his spare time, and that’s why he has silicone fish.

We tied three fish to a fishing line. The line was passed through the neck of the bottle, brought out and screwed on with the cap.

We demonstrate the aquarium from all sides. It turned out to be a very unusual craft. Silicone fish happily wag their tails at the slightest movement of the aquarium. Our craft will definitely take first place in children's projects.

More interesting:

See also:

Crafts from plastic bottles
Crafts from plastic bottles Today we again have a topic about crafts made from garbage, or rather, from plastic...

These beautiful fish from plastic bottles were made to celebrate the completion and grand opening of it!

The employees of TSNTUM (center for technical creativity) were so happy that in one day they painted the sides of the pool in a marine style and created a whole sea of sea inhabitants! And everything is made from plastic bottles: fish, turtles, starfish, and octopuses!

It turned out very beautiful and elegant. And making fish from a bottle is simple. There are two options: flat and voluminous fish.

The first option is to simply cut the bottle and cut out the silhouette of a fish from it, like from cardboard.

Second - cut bottom part bottles, a little less than half, and cut off the neck. From the scraps we cut out lips and fins in the amount of 2 pieces, upper and lower. We insert “lips” into the hole from the neck of the bottle, make slits at the top and bottom and insert fins; for reliability, you can use glue. back part cut it in the shape of the tail and pull its two halves together, tying them with wire or fishing line.

The fish are ready! Now let's paint them, it turns out very impressive if you paint it from a spray can - look how beautifully the colors shimmer!

And the stripes on the fins and tail, scales, and eyes can be drawn with a permanent marker.

Pebbles were placed inside the bulky fish for stability, and the “flat” ones were attached with wires to the sides of the pool.

Elena Timofeeva

The children of the second junior group and I made such wonderful fish during an integrated lesson. (modeling + manual labor)

For the manufacture of you will need some fish:

Big scissors

Empty plastic shampoo bottle

Sequins of any color or flat buttons resembling fish scales

- Plasticine

Stages of work:

1) Cut from bottles fish silhouette

2) Smear the Piece plasticine on the surface leaving fins and tail

3) Decorate on top plasticine sequins(try not to leave any areas not covered with sequins)

My students were happy to make their own crafts during the lesson we had fun making our own crafts in class, some of them turned out to be very original. The children showed obvious interest in class: got to know the parts of the body fish, habits. I often use it in making crafts, non-traditional materials, which makes the lesson interesting and memorable for children

Publications on the topic:

Materials for work: toilet paper cylinder, colored paper, glue stick, scissors, art kits “Eyes”, “Colored soft.

Lesson notes for the second junior group (modeling) “Come and visit.” Goal: learn to sculpt birds in a constructive way from four to five pieces of different shapes and sizes using additional material.

Master class for college students “Manual labor in kindergarten. Origami" GOAL: mastering the organization of manual labor in professional activities and the corresponding professional competencies of the student.

Modeling in the second junior group “Fish” Modeling in the second younger group. Fish. Goals: To teach children to sculpt oval-shaped objects, pinch parts and decorate the product using.

Master class for young teachers. MKDOU " Kindergarten"Altn Bulg" village Tsagan Aman, Yustinsky district. Republic of Kalmykia. Educator: Vankaeva.

On March 8th, mothers can be given these vases of flowers. To make this craft you will need: a green sheet of A4 paper, corrugated paper.